scholarly journals The Role of Individual Surface Flux Components in the Passive and Active Ocean Heat Uptake

2018 ◽  
Vol 31 (15) ◽  
pp. 6157-6173 ◽  
Author(s):  
Oluwayemi A. Garuba ◽  
Barry A. Klinger
Keyword(s):  
Heat Flux ◽  
Heat Loss ◽  
Surface Heat Flux ◽  
Active Component ◽  
Surface Flux ◽  
Surface Heat ◽  
Ocean Heat Uptake ◽  
Heat Gain ◽  
Circulation Change ◽  
Heat Uptake

Surface flux perturbations (heat, freshwater, and wind) due to an increase of atmospheric CO2 cause significant intermodel spread in ocean heat uptake; however, the mechanism underlying their impact is not very well understood. Here, we use ocean model experiments to isolate the impact of each perturbation on the ocean heat uptake components, focusing on surface heat flux anomalies caused directly by atmospheric CO2 increase (passive) and indirectly by ocean circulation change (active). Surface heat flux perturbations cause the passive heat uptake, while all the surface flux perturbations influence ocean heat uptake through the active component. While model results have implied that the active component increases ocean heat uptake because of the weakening of the Atlantic meridional overturning circulation (AMOC), we find that it depends more on the shallow circulation change patterns. Surface heat flux perturbation causes most of the AMOC weakening, yet it causes a net global active heat loss (12% of the total uptake), which occurs because the active heat loss in the tropical Pacific through the subtropical cell weakening is greater than the active heat gain in the subpolar Atlantic through AMOC weakening. Freshwater perturbation weakens the AMOC a little more, but increases the subpolar Atlantic heat uptake a great deal through a large weakening of the subpolar gyre, thereby causing a large global active heat gain (34% of the total uptake). Wind perturbation also causes an active heat loss largely through the poleward shift of the Southern Hemisphere subtropical cells.

scholarly journals The Deep-Ocean Heat Uptake in Transient Climate Change

2003 ◽  
Vol 16 (9) ◽  
pp. 1352-1363 ◽  
Author(s):  
Boyin Huang ◽  
Peter H. Stone ◽  
Andrei P. Sokolov ◽  
Igor V. Kamenkovich
Keyword(s):  
Heat Flux ◽  
Global Warming ◽  
Surface Heat Flux ◽  
Coupled Model ◽  
Deep Ocean ◽  
Surface Heat ◽  
Ocean Heat Uptake ◽  
Warming Scenario ◽  
Heat Uptake ◽  
Global Warming Scenario

Abstract The deep-ocean heat uptake (DOHU) in transient climate changes is studied using an ocean general circulation model (OGCM) and its adjoint. The model configuration consists of idealized Pacific and Atlantic basins. The model is forced with the anomalies of surface heat and freshwater fluxes from a global warming scenario with a coupled model using the same ocean configuration. In the global warming scenario, CO2 concentration increases 1% yr−1. The heat uptake calculated from the coupled model and from the adjoint are virtually identical, showing that the heat uptake by the OGCM is a linear process. After 70 yr the ocean heat uptake is almost evenly distributed within the layers above 200 m, between 200 and 700 m, and below 700 m (about 20 × 1022 J in each). The effect of anomalous surface freshwater flux on the DOHU is negligible. Analysis of the Coupled Model Intercomparison Project (CMIP-2) data for the same global warming scenario shows that qualitatively similar results apply to coupled atmosphere–ocean GCMs. The penetration of surface heat flux to the deep ocean in the OGCM occurs mainly in the North Atlantic and the Southern Ocean, since both the sensitivity of DOHU to the surface heat flux and the magnitude of anomalous surface heat flux are large in these two regions. The DOHU relies on the reduction of convection and Gent–McWilliams–Redi mixing in the North Atlantic, and the reduction of Gent–McWilliams–Redi mixing in the Southern Ocean.

scholarly journals Ocean Heat Uptake and Interbasin Transport of the Passive and Redistributive Components of Surface Heating

2016 ◽  
Vol 29 (20) ◽  
pp. 7507-7527 ◽  
Author(s):  
Oluwayemi A. Garuba ◽  
Barry A. Klinger
Keyword(s):  
Heat Flux ◽  
Heat Input ◽  
Surface Heat Flux ◽  
Heat Content ◽  
Surface Heat ◽  
Global Ocean ◽  
Passive Component ◽  
Ocean Heat Uptake ◽  
Anomalous Surface ◽  
Heat Uptake

Abstract Global warming induces ocean circulation changes that not only can redistribute ocean reservoir temperature stratification but also change the total heat content anomaly of the ocean. Here all consequences of this process are referred to collectively as “redistribution.” Previous model studies of redistributive effects could not measure the net global contribution to the amount of ocean heat uptake by redistribution. In this study, a global ocean model experiment with abrupt increase in surface temperature is conducted with a new passive tracer formulation. This separates ocean heat uptake into contributions due to redistribution temperature and surface heat flux anomalies and those due to the passive advection and mixing of surface heat flux anomalies forced in the atmosphere. For a decline in the Atlantic meridional overturning circulation of about 40%, redistribution nearly doubles the Atlantic passive anomalous surface heat input and depth penetration of temperature anomalies. However, smaller increases in the Indian and Pacific Oceans cause the net global redistributive contribution to be only 25% of the passive contribution. Despite the much larger anomalous surface heat input in the Atlantic, the Pacific gains heat content anomaly similar to that in the Atlantic because of export from the Atlantic and Indian Oceans via the global conveyor belt. Of this interbasin heat transport, most of the passive component comes from the Indian Ocean and the redistributive component comes from the Atlantic.

Analysis of significant measures for thermal conductivity

2020 ◽  
pp. 35-42
Author(s):  
Yuri P. Zarichnyak ◽  
Vyacheslav P. Khodunkov
Keyword(s):  
Thermal Conductivity ◽  
Heat Flux ◽  
Surface Heat Flux ◽  
Heat Flux Density ◽  
Measurement Method ◽  
Conductivity Measurement ◽  
Surface Heat ◽  
Measuring Instrument ◽  
New Class ◽  
Achievable Accuracy

The analysis of a new class of measuring instrument for heat quantities based on the use of multi-valued measures of heat conductivity of solids. For example, measuring thermal conductivity of solids shown the fallacy of the proposed approach and the illegality of the use of the principle of ambiguity to intensive thermal quantities. As a proof of the error of the approach, the relations for the thermal conductivities of the component elements of a heat pump that implements a multi-valued measure of thermal conductivity are given, and the limiting cases are considered. In two ways, it is established that the thermal conductivity of the specified measure does not depend on the value of the supplied heat flow. It is shown that the declared accuracy of the thermal conductivity measurement method does not correspond to the actual achievable accuracy values and the standard for the unit of surface heat flux density GET 172-2016. The estimation of the currently achievable accuracy of measuring the thermal conductivity of solids is given. The directions of further research and possible solutions to the problem are given.

Heat Transfer Characteristics of Downward Facing Hot Horizontal Surfaces Using Mist Jet Impingement

2017 ◽  
Author(s):  
Ashutosh Kumar Yadav ◽  
Parantak Sharma ◽  
Avadhesh Kumar Sharma ◽  
Mayank Modak ◽  
Vishal Nirgude ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Surface Heat Flux ◽  
Cooling System ◽  
Water Pressure ◽  
Jet Impingement ◽  
Surface Heat ◽  
Heat Transfer Characteristics ◽  
Impingement Cooling ◽  
Transfer Characteristics

Impinging jet cooling technique has been widely used extensively in various industrial processes, namely, cooling and drying of films and papers, processing of metals and glasses, cooling of gas turbine blades and most recently cooling of various components of electronic devices. Due to high heat removal rate the jet impingement cooling of the hot surfaces is being used in nuclear industries. During the loss of coolant accidents (LOCA) in nuclear power plant, an emergency core cooling system (ECCS) cool the cluster of clad tubes using consisting of fuel rods. Controlled cooling, as an important procedure of thermal-mechanical control processing technology, is helpful to improve the microstructure and mechanical properties of steel. In industries for heat transfer efficiency and homogeneous cooling performance which usually requires a jet impingement with improved heat transfer capacity and controllability. It provides better cooling in comparison to air. Rapid quenching by water jet, sometimes, may lead to formation of cracks and poor ductility to the quenched surface. Spray and mist jet impingement offers an alternative method to uncontrolled rapid cooling, particularly in steel and electronics industries. Mist jet impingement cooling of downward facing hot surface has not been extensively studied in the literature. The present experimental study analyzes the heat transfer characteristics a 0.15mm thick hot horizontal stainless steel (SS-304) foil using Internal mixing full cone (spray angle 20 deg) mist nozzle from the bottom side. Experiments have been performed for the varied range of water pressure (0.7–4.0 bar) and air pressure (0.4–5.8 bar). The effect of water and air inlet pressures, on the surface heat flux has been examined in this study. The maximum surface heat flux is achieved at stagnation point and is not affected by the change in nozzle to plate distance, Air and Water flow rates.

scholarly journals Nanofluid Flow on a Shrinking Cylinder with Al2O3 Nanoparticles

Mathematics ◽  
2021 ◽  
Vol 9 (14) ◽  
pp. 1612
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Friction Factor ◽  
Surface Heat Flux ◽  
Transfer Rate ◽  
Surface Heat ◽  
Al2o3 Nanoparticles ◽  
Nanofluid Flow ◽  
Curvature Parameter ◽  
Over Time

This study investigates the nanofluid flow towards a shrinking cylinder consisting of Al2O3 nanoparticles. Here, the flow is subjected to prescribed surface heat flux. The similarity variables are employed to gain the similarity equations. These equations are solved via the bvp4c solver. From the findings, a unique solution is found for the shrinking strength λ≥−1. Meanwhile, the dual solutions are observed when λc<λ<−1. Furthermore, the friction factor Rex1/2Cf and the heat transfer rate Rex−1/2Nux increase with the rise of Al2O3 nanoparticles φ and the curvature parameter γ. Quantitatively, the rates of heat transfer Rex−1/2Nux increase up to 3.87% when φ increases from 0 to 0.04, and 6.69% when γ increases from 0.05 to 0.2. Besides, the profiles of the temperature θ(η) and the velocity f’(η) on the first solution incline for larger γ, but their second solutions decline. Moreover, it is noticed that the streamlines are separated into two regions. Finally, it is found that the first solution is stable over time.

Sign in / Sign up

Export Citation Format

Share Document