scholarly journals Impact of Desert Dust Radiative Forcing on Sahel Precipitation: Relative Importance of Dust Compared to Sea Surface Temperature Variations, Vegetation Changes, and Greenhouse Gas Warming

2007 ◽  
Vol 20 (8) ◽  
pp. 1445-1467 ◽  
Author(s):  
Masaru Yoshioka ◽  
Natalie M. Mahowald ◽  
Andrew J. Conley ◽  
William D. Collins ◽  
David W. Fillmore ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
North Africa ◽  
Radiative Forcing ◽  
Sea Surface ◽  
Desert Dust ◽  
Direct Radiative Forcing ◽  
Sahel Region ◽  
Precipitation Reduction ◽  
Sahel Precipitation

Abstract The role of direct radiative forcing of desert dust aerosol in the change from wet to dry climate observed in the African Sahel region in the last half of the twentieth century is investigated using simulations with an atmospheric general circulation model. The model simulations are conducted either forced by the observed sea surface temperature (SST) or coupled with the interactive SST using the Slab Ocean Model (SOM). The simulation model uses dust that is less absorbing in the solar wavelengths and has larger particle sizes than other simulation studies. As a result, simulations show less shortwave absorption within the atmosphere and larger longwave radiative forcing by dust. Simulations using SOM show reduced precipitation over the intertropical convergence zone (ITCZ) including the Sahel region and increased precipitation south of the ITCZ when dust radiative forcing is included. In SST-forced simulations, on the other hand, significant precipitation changes are restricted to over North Africa. These changes are considered to be due to the cooling of global tropical oceans as well as the cooling of the troposphere over North Africa in response to dust radiative forcing. The model simulation of dust cannot capture the magnitude of the observed increase of desert dust when allowing dust to respond to changes in simulated climate, even including changes in vegetation, similar to previous studies. If the model is forced to capture observed changes in desert dust, the direct radiative forcing by the increase of North African dust can explain up to 30% of the observed precipitation reduction in the Sahel between wet and dry periods. A large part of this effect comes through atmospheric forcing of dust, and dust forcing on the Atlantic Ocean SST appears to have a smaller impact. The changes in the North and South Atlantic SSTs may account for up to 50% of the Sahel precipitation reduction. Vegetation loss in the Sahel region may explain about 10% of the observed drying, but this effect is statistically insignificant because of the small number of years in the simulation. Greenhouse gas warming seems to have an impact to increase Sahel precipitation that is opposite to the observed change. Although the estimated values of impacts are likely to be model dependent, analyses suggest the importance of direct radiative forcing of dust and feedbacks in modulating Sahel precipitation.

scholarly journals Role of sea surface temperature responses in simulation of the climatic effect of mineral dust aerosol

2011 ◽  
Vol 11 (12) ◽  
pp. 6049-6062 ◽  
Author(s):  
X. Yue ◽  
H. Liao ◽  
H. J. Wang ◽  
S. L. Li ◽  
J. P. Tang
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Radiative Forcing ◽  
Mineral Dust ◽  
Dust Aerosol ◽  
Sea Surface ◽  
Climatic Effect ◽  
Radiative Effects ◽  
Climate Simulations

Abstract. Mineral dust aerosol can be transported over the nearby oceans and influence the energy balance at the sea surface. The role of dust-induced sea surface temperature (SST) responses in simulations of the climatic effect of dust is examined by using a general circulation model with online simulation of mineral dust and a coupled mixed-layer ocean model. Both the longwave and shortwave radiative effects of mineral dust aerosol are considered in climate simulations. The SST responses are found to be very influential on simulated dust-induced climate change, especially when climate simulations consider the two-way dust-climate coupling to account for the feedbacks. With prescribed SSTs and dust concentrations, we obtain an increase of 0.02 K in the global and annual mean surface air temperature (SAT) in response to dust radiative effects. In contrast, when SSTs are allowed to respond to radiative forcing of dust in the presence of the dust cycle-climate interactions, we obtain a global and annual mean cooling of 0.09 K in SAT by dust. The extra cooling simulated with the SST responses can be attributed to the following two factors: (1) The negative net (shortwave plus longwave) radiative forcing of dust at the surface reduces SST, which decreases latent heat fluxes and upward transport of water vapor, resulting in less warming in the atmosphere; (2) The positive feedback between SST responses and dust cycle. The dust-induced reductions in SST lead to reductions in precipitation (or wet deposition of dust) and hence increase the global burden of small dust particles. These small particles have strong scattering effects, which enhance the dust cooling at the surface and further reduce SSTs.

scholarly journals The influence of direct radiative forcing versus indirect sea surface temperature warming on southern hemisphere subtropical anticyclones under global warming

2021 ◽  
Author(s):  
Abdullah A. Fahad ◽  
Natalie J. Burls
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Southern Hemisphere ◽  
Radiative Forcing ◽  
Diabatic Heating ◽  
Sea Surface ◽  
Atmospheric Response ◽  
Austral Winter ◽  
Subtropical Anticyclone ◽  
Surface Temperature Warming

AbstractSouthern hemisphere subtropical anticyclones are projected to change in a warmer climate during both austral summer and winter. A recent study of CMIP 5 & 6 projections found a combination of local diabatic heating changes and static-stability-induced changes in baroclinic eddy growth as the dominant drivers. Yet the underlying mechanisms forcing these changes still remain uninvestigated. This study aims to enhance our mechanistic understanding of what drives these Southern Hemisphere anticyclones changes during both seasons. Using an AGCM, we decompose the response to CO2-induced warming into two components: (1) the fast atmospheric response to direct CO2 radiative forcing, and (2) the slow atmospheric response due to indirect sea surface temperature warming. Additionally, we isolate the influence of tropical diabatic heating with AGCM added heating experiments. As a complement to our numerical AGCM experiments, we analyze the Atmospheric and Cloud Feedback Model Intercomparison Project experiments. Results from sensitivity experiments show that slow subtropical sea surface temperature warming primarily forces the projected changes in subtropical anticyclones through baroclinicity change. Fast CO2 atmospheric radiative forcing on the other hand plays a secondary role, with the most notable exception being the South Atlantic subtropical anticyclone in austral winter, where it opposes the forcing by sea surface temperature changes resulting in a muted net response. Lastly, we find that tropical diabatic heating changes only significantly influence Southern Hemisphere subtropical anticyclone changes through tropospheric wind shear changes during austral winter.

scholarly journals Application of Multivariate Sensitivity Analysis Techniques to AGCM-Simulated Tropical Cyclones

2018 ◽  
Vol 146 (7) ◽  
pp. 2065-2088 ◽  
Author(s):  
Fei He ◽  
Derek J. Posselt ◽  
Naveen N. Narisetty ◽  
Colin M. Zarzycki ◽  
Vijayan N. Nair
Keyword(s):  
Sensitivity Analysis ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Tropical Cyclones ◽  
Radiative Forcing ◽  
Initial Conditions ◽  
Sea Surface ◽  
Precipitation Rate ◽  
Analysis Framework ◽  
Control Factors

Abstract This work demonstrates the use of Sobol’s sensitivity analysis framework to examine multivariate input–output relationships in dynamical systems. The methodology allows simultaneous exploration of the effect of changes in multiple inputs, and accommodates nonlinear interaction effects among parameters in a computationally affordable way. The concept is illustrated via computation of the sensitivities of atmospheric general circulation model (AGCM)-simulated tropical cyclones to changes in model initial conditions. Specifically, Sobol’s variance-based sensitivity analysis is used to examine the response of cyclone intensity, cloud radiative forcing, cloud content, and precipitation rate to changes in initial conditions in an idealized AGCM-simulated tropical cyclone (TC). Control factors of interest include the following: initial vortex size and intensity, environmental sea surface temperature, vertical lapse rate, and midlevel relative humidity. The sensitivity analysis demonstrates systematic increases in TC intensity with increasing sea surface temperature and atmospheric temperature lapse rates, consistent with many previous studies. However, there are nonlinear interactions among control factors that affect the response of the precipitation rate, cloud content, and radiative forcing. In addition, sensitivities to control factors differ significantly when the model is run at different resolution, and coarse-resolution simulations are unable to produce a realistic TC. The results demonstrate the effectiveness of a quantitative sensitivity analysis framework for the exploration of dynamic system responses to perturbations, and have implications for the generation of ensembles.

scholarly journals Adjusting for Desert-Dust-Related Biases in a Climate Data Record of Sea Surface Temperature

2020 ◽  
Vol 12 (16) ◽  
pp. 2554
Author(s):  
Christopher J. Merchant ◽  
Owen Embury
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Large Scale ◽  
Dust Aerosol ◽  
Sea Surface ◽  
Climate Data ◽  
Desert Dust ◽  
Data Record ◽  
Climate Data Record

Atmospheric desert-dust aerosol, primarily from north Africa, causes negative biases in remotely sensed climate data records of sea surface temperature (SST). Here, large-scale bias adjustments are deduced and applied to the v2 climate data record of SST from the European Space Agency Climate Change Initiative (CCI). Unlike SST from infrared sensors, SST measured in situ is not prone to desert-dust bias. An in-situ-based SST analysis is combined with column dust mass from the Modern-Era Retrospective analysis for Research and Applications, Version 2 to deduce a monthly, large-scale adjustment to CCI analysis SSTs. Having reduced the dust-related biases, a further correction for some periods of anomalous satellite calibration is also derived. The corrections will increase the usability of the v2 CCI SST record for oceanographic and climate applications, such as understanding the role of Arabian Sea SSTs in the Indian monsoon. The corrections will also pave the way for a v3 climate data record with improved error characteristics with respect to atmospheric dust aerosol.

Fast and Slow Responses to Global Warming: Sea Surface Temperature and Precipitation Patterns

2014 ◽  
Vol 27 (1) ◽  
pp. 285-299 ◽  
Author(s):  
Shang-Min Long ◽  
Shang-Ping Xie ◽  
Xiao-Tong Zheng ◽  
Qinyu Liu
Keyword(s):  
Global Warming ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Radiative Forcing ◽  
Diagnostic Method ◽  
Slow Component ◽  
Sea Surface ◽  
Annual Rainfall ◽  
Geophysical Fluid Dynamics Laboratory ◽  
Quasi Equilibrium

Abstract The time-dependent response of sea surface temperature (SST) to global warming and the associated atmospheric changes are investigated based on a 1% yr−1 CO2 increase to the quadrupling experiment of the Geophysical Fluid Dynamics Laboratory Climate Model, version 2.1. The SST response consists of a fast component, for which the ocean mixed layer is in quasi equilibrium with the radiative forcing, and a slow component owing to the gradual warming of the deeper ocean in and beneath the thermocline. A diagnostic method is proposed to isolate spatial patterns of the fast and slow responses. The deep ocean warming retards the surface warming in the fast response but turns into a forcing for the slow response. As a result, the fast and slow responses are nearly opposite to each other in spatial pattern, especially over the subpolar North Atlantic/Southern Ocean regions of the deep-water/bottom-water formation, and in the interhemispheric SST gradient between the southern and northern subtropics. Wind–evaporation–SST feedback is an additional mechanism for the SST pattern formation in the tropics. Analyses of phase 5 of the Coupled Model Intercomparison Project (CMIP5) multimodel ensemble of global warming simulations confirm the validity of the diagnostic method that separates the fast and slow responses. Tropical annual rainfall change follows the SST warming pattern in both the fast and slow responses in CMIP5, increasing where the SST increase exceeds the tropical mean warming.

scholarly journals Using an AGCM to Diagnose Historical Effective Radiative Forcing and Mechanisms of Recent Decadal Climate Change

2014 ◽  
Vol 27 (3) ◽  
pp. 1193-1209 ◽  
Author(s):  
Timothy Andrews
Keyword(s):  
Climate Change ◽  
Sea Ice ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Radiative Forcing ◽  
General Circulation ◽  
Circulation Model ◽  
Sea Surface ◽  
Aerosol Forcing ◽  
Effective Radiative Forcing

Abstract An atmospheric general circulation model is forced with observed monthly sea surface temperature and sea ice boundary conditions, as well as forcing agents that vary in time, for the period 1979–2008. The simulations are then repeated with various forcing agents, individually and in combination, fixed at preindustrial levels. The simple experimental design allows the diagnosis of the model’s global and regional time-varying effective radiative forcing from 1979 to 2008 relative to preindustrial levels. Furthermore the design can be used to (i) calculate the atmospheric model’s feedback/sensitivity parameters to observed changes in sea surface temperature and (ii) separate those aspects of climate change that are directly driven by the forcing from those driven by large-scale changes in sea surface temperature. It is shown that the atmospheric response to increased radiative forcing over the last 3 decades has halved the global precipitation response to surface warming. Trends in sea surface temperature and sea ice are found to contribute only ~60% of the global land, Northern Hemisphere, and summer land warming trends. Global effective radiative forcing is ~1.5 W m−2 in this model, with anthropogenic and natural contributions of ~1.3 and ~0.2 W m−2, respectively. Forcing increases by ~0.5 W m−2 decade−1 over the period 1979–2008 or ~0.4 W m−2 decade−1 if years strongly influenced by volcanic forcings—which are nonlinear with time—are excluded from the trend analysis. Aerosol forcing shows little global decadal trend due to offsetting regional trends whereby negative aerosol forcing weakens in Europe and North America but continues to strengthen in Southeast Asia.

Sign in / Sign up

Export Citation Format

Share Document