scholarly journals Phase-Resolved Wave Field Simulation Calibration of Sea Surface Reconstruction Using Noncoherent Marine Radar

2016 ◽  
Vol 33 (6) ◽  
pp. 1135-1149 ◽  
Author(s):  
Yusheng Qi ◽  
Wenting Xiao ◽  
Dick K. P. Yue
Keyword(s):  
Wave Field ◽  
Sea Surface ◽  
Radar Signal ◽  
Reconstruction Method ◽  
Ocean Engineering ◽  
Wave Fields ◽  
Wave Measurements ◽  
Time Optimal ◽  
Maritime Operations ◽  
Marine Radar

AbstractThe possibility of reconstructing sea surface wave fields from a noncoherent X-band marine radar return has much potential for maritime operations and ocean engineering. The existing reconstruction method extracts the signal associated with gravity waves that satisfy the dispersion relationship. The process involves parameters related to how the radar signal is modulated by waves of different lengths, propagation directions, amplitudes, and phases. In the absence of independent wave measurements, these reconstruction parameters cannot be rationally adjusted according to wave field conditions, and the predictions are generally of uneven accuracy and reliability. A new reconstruction method based on concurrent phase-resolved wave field simulations is proposed. By maximizing the correlation between the reconstructed and simulated wave fields over time, optimal values of the reconstruction parameters are obtained that are found to vary appreciably with the wave field properties and with the location and size of the subdomain being sensed and reconstructed. With this phase-resolved simulation calibrated (PRSC) approach, the correlation between the evolving reconstructed wave field and that based on phase-resolved simulation, which measures the consistency and fidelity of the reconstruction, is improved significantly (by up to a factor of 2) and is obtained in a substantially broader range of sea states compared to existing methods.

Nonlinear phase-resolved reconstruction of irregular water waves

2018 ◽  
Vol 838 ◽  
pp. 544-572 ◽  
Author(s):  
Yusheng Qi ◽  
Guangyu Wu ◽  
Yuming Liu ◽  
Moo-Hyun Kim ◽  
Dick K. P. Yue
Keyword(s):  
Wave Field ◽  
Nonlinear Wave ◽  
Water Waves ◽  
Three Dimensional ◽  
Reconstruction Error ◽  
High Order ◽  
Order Effects ◽  
Wave Fields ◽  
Wave Measurements ◽  
Wave Nonlinearity

We develop and validate a high-order reconstruction (HOR) method for the phase-resolved reconstruction of a nonlinear wave field given a set of wave measurements. HOR optimizes the amplitude and phase of $L$ free wave components of the wave field, accounting for nonlinear wave interactions up to order $M$ in the evolution, to obtain a wave field that minimizes the reconstruction error between the reconstructed wave field and the given measurements. For a given reconstruction tolerance, $L$ and $M$ are provided in the HOR scheme itself. To demonstrate the validity and efficacy of HOR, we perform extensive tests of general two- and three-dimensional wave fields specified by theoretical Stokes waves, nonlinear simulations and physical wave fields in tank experiments which we conduct. The necessary $L$, for general broad-banded wave fields, is shown to be substantially less than the free and locked modes needed for the nonlinear evolution. We find that, even for relatively small wave steepness, the inclusion of high-order effects in HOR is important for prediction of wave kinematics not in the measurements. For all the cases we consider, HOR converges to the underlying wave field within a nonlinear spatial-temporal predictable zone ${\mathcal{P}}_{NL}$ which depends on the measurements and wave nonlinearity. For infinitesimal waves, ${\mathcal{P}}_{NL}$ matches the linear predictable zone ${\mathcal{P}}_{L}$, verifying the analytic solution presented in Qi et al. (Wave Motion, vol. 77, 2018, pp. 195–213). With increasing wave nonlinearity, we find that ${\mathcal{P}}_{NL}$ contains and is generally greater than ${\mathcal{P}}_{L}$. Thus ${\mathcal{P}}_{L}$ provides a (conservative) estimate of ${\mathcal{P}}_{NL}$ when the underlying wave field is not known.

scholarly journals A spatiotemporal reconstruction of sea-surface temperatures in the North Atlantic during Dansgaard–Oeschger events 5–8

2018 ◽  
Vol 14 (6) ◽  
pp. 901-922 ◽  
Author(s):  
Mari F. Jensen ◽  
Aleksi Nummelin ◽  
Søren B. Nielsen ◽  
Henrik Sadatzki ◽  
Evangeline Sessford ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
North Atlantic ◽  
General Circulation ◽  
Sea Surface ◽  
Reconstruction Method ◽  
Sea Surface Temperatures ◽  
Proxy Data ◽  
Surface Temperatures ◽  
Temperature Reconstructions

Abstract. Here, we establish a spatiotemporal evolution of the sea-surface temperatures in the North Atlantic over Dansgaard–Oeschger (DO) events 5–8 (approximately 30–40 kyr) using the proxy surrogate reconstruction method. Proxy data suggest a large variability in North Atlantic sea-surface temperatures during the DO events of the last glacial period. However, proxy data availability is limited and cannot provide a full spatial picture of the oceanic changes. Therefore, we combine fully coupled, general circulation model simulations with planktic foraminifera based sea-surface temperature reconstructions to obtain a broader spatial picture of the ocean state during DO events 5–8. The resulting spatial sea-surface temperature patterns agree over a number of different general circulation models and simulations. We find that sea-surface temperature variability over the DO events is characterized by colder conditions in the subpolar North Atlantic during stadials than during interstadials, and the variability is linked to changes in the Atlantic Meridional Overturning circulation and in the sea-ice cover. Forced simulations are needed to capture the strength of the temperature variability and to reconstruct the variability in other climatic records not directly linked to the sea-surface temperature reconstructions. This is the first time the proxy surrogate reconstruction method has been applied to oceanic variability during MIS3. Our results remain robust, even when age uncertainties of proxy data, the number of available temperature reconstructions, and different climate models are considered. However, we also highlight shortcomings of the methodology that should be addressed in future implementations.

Interaction of High Frequency Lamb Waves with Surface-Mount Sensor Adhesives

2013 ◽  
Vol 558 ◽  
pp. 489-500 ◽  
Author(s):  
Patrick Norman ◽  
Claire Davis ◽  
Cédric Rosalie ◽  
Nik Rajic
Keyword(s):  
Wave Field ◽  
Lamb Waves ◽  
Base Material ◽  
Adhesive Layer ◽  
Scattered Wave ◽  
Phase Lag ◽  
Wave Fields ◽  
Surface Mount ◽  
Frequency Regime ◽  
Fibre Bragg Gratings

The application of Lamb waves to damage and/or defect detection in structures is typicallyconfined to lower frequencies in regimes where only the lower order modes propagate in order to simplifyinterpretation of the scattered wave-fields. Operation at higher frequencies offers the potentialto extend the sensitivity and diagnostic capability of this technique, however there are technical challengesassociated with the measurement and interpretation of this data. Recent work by the authorshas demonstrated the ability of fibre Bragg gratings (FBGs) to measure wave-fields at frequencies inexcess of 2 MHz [1]. However, when this work was extended to other thinner plate specimens it wasfound that at these higher frequencies, the cyanoacrylate adhesive (M-Bond 200) used to attach theFBG sensors to the plate was significantly affecting the propagation of the waves. Laser vibrometrywas used to characterise the wave-field in the region surrounding the adhesive and it was found that theself-adhesive retro-reflective tape applied to aid with this measurement was also affecting the wavefieldin the higher frequency regime. This paper reports on an experimental study into the influence ofboth of these materials on the propagating wave-field. Three different lengths of retro-reflective tapewere placed in the path of Lamb waves propagating in an aluminium plate and laser vibrometry wasused to measure the wave-field upstream and downstream of the tape for a range of different excitationfrequencies. The same experiment was conducted using small footprint cyanoacrylate film samplesof different thickness. The results show that both of these surface-mount materials attenuate, diffractand scatter the incoming waves as well as introducing a phase lag. The degree of influence of thesurface layer appears to be a function of its material properties, the frequency of the incoming waveand the thickness and footprint of the surface layer relative to the base material thickness. Althoughfurther work is required to characterise the relative influence of each of these variables, investigationsto date show that for the measurement of Lamb Waves on thin structures, careful considerationshould be given to the thickness and footprint of the adhesive layer and sensor, particularly in the highfrequency regime, so as to minimise their effect on the measurement.

Coastal sea-surface wave measurements using software-based GPS reflectometers in Lanyu, Taiwan

GPS Solutions ◽  
2021 ◽  
Vol 25 (4) ◽  
Author(s):  
Lung-Chih Tsai ◽  
Shin-Yi Su ◽  
Hwa Chien ◽  
Chao-Han Liu ◽  
Harald Schuh ◽  
...  
Keyword(s):  
Surface Wave ◽  
Sea Surface ◽  
Wave Measurements ◽  
Coastal Sea ◽  
Sea Surface Wave

Towards Nonlinear Wave Reconstruction and Prediction From Synthetic Radar Images

2016 ◽  
Author(s):  
A. P. Wijaya
Keyword(s):  
Vertical Direction ◽  
Sea Surface ◽  
Sea State ◽  
Operational Effectiveness ◽  
State Reconstruction ◽  
Radar Images ◽  
First Results ◽  
Marine Radar ◽  
Offshore Activities

The use of remotely wave sensing by a marine radar is increasingly needed to provide wave information for the sake of safety and operational effectiveness in many offshore activities. Reconstruction of radar images needs to be carried out since radar images are a poor representation of the sea surface elevation: effects like shadowing and tilt determine the backscattered intensity of the images. In [1], the sea state reconstruction and wave propagation to the radar has been tackled successfully for synthetic radar images of linear seas, except for a scaling in the vertical direction. The determination of the significant wave height from the shadowed images only has been described in [2]. This paper will summarize these methods, and provides the first results for the extension to nonlinear seas.

Non-resonant mechanisms of radar signal scattering from the sea surface

2006 ◽  
Author(s):  
Yury A. Kravtsov ◽  
Vladimir N. Kudryavtsev ◽  
Andrzej Stateczny
Keyword(s):  
Sea Surface ◽  
Radar Signal

Migration of seismic data by phase shift plus interpolation

Geophysics ◽  
1984 ◽  
Vol 49 (2) ◽  
pp. 124-131 ◽  
Author(s):  
Jeno Gazdag ◽  
Piero Sguazzero
Keyword(s):  
Phase Shift ◽  
Wave Field ◽  
Seismic Data ◽  
Three Dimensional ◽  
Reference Wave ◽  
Second Step ◽  
Lateral Velocity ◽  
Wave Fields ◽  
Shift Method ◽  
Phase Shift Method

Under the horizontally layered velocity assumption, migration is defined by a set of independent ordinary differential equations in the wavenumber‐frequency domain. The wave components are extrapolated downward by rotating their phases. This paper shows that one can generalize the concepts of the phase‐shift method to media having lateral velocity variations. The wave extrapolation procedure consists of two steps. In the first step, the wave field is extrapolated by the phase‐shift method using ℓ laterally uniform velocity fields. The intermediate result is ℓ reference wave fields. In the second step, the actual wave field is computed by interpolation from the reference wave fields. The phase shift plus interpolation (PSPI) method is unconditionally stable and lends itself conveniently to migration of three‐dimensional data. The performance of the methods is demonstrated on synthetic examples. The PSPI migration results are then compared with those obtained from a finite‐difference method.

Predicted wave field in a laboratory wave basin

1990 ◽  
Vol 17 (6) ◽  
pp. 1005-1014 ◽  
Author(s):  
Michael Isaacson ◽  
Shiqin Qu
Keyword(s):  
Wave Field ◽  
Wave Diffraction ◽  
Diffraction Theory ◽  
Ocean Engineering ◽  
Laboratory Facilities ◽  
Rectangular Basin ◽  
Diffraction Wave ◽  
Wave Basin ◽  
Wave Generator ◽  
Reflection Boundary

The present paper describes a numerical method for predicting the wave field produced by a segmented wave generator undergoing specified motions in a wave basin which may contain partially reflecting sides. The approach used is based on linear diffraction theory and utilizes a point source representation of the generator segments and any reflecting walls that are present. The method involves the application of a partial reflection boundary condition, which is discussed. Numerical results are presented for the propagating wave field due to specified wave generator motions in a rectangular basin. Cases that are considered include both perfectly absorbing and partially reflecting beaches along the basin sides, as well as the presence of perfectly reflecting short sidewalls near the generator. The method appears able to account adequately for the effects of wave diffraction and partial reflections, and to predict the generated wave field realistically. Key words: coastal engineering, hydrodynamics, laboratory facilities, ocean engineering, wave diffraction, wave generation, wave reflection.

Sign in / Sign up

Export Citation Format

Share Document