Influence of Contact Stress, Sliding Velocity, and Surface Roughness on the Sliding Wear of a Composite Restorative

1981 ◽  
Vol 60 (5) ◽  
pp. 914-918 ◽  
Author(s):  
William F. Bailey ◽  
Stephen L. Rice ◽  
Ronald J. Albert ◽  
Samuel C. Temin
Keyword(s):  
Surface Roughness ◽  
Contact Stress ◽  
Sliding Wear ◽  
Sliding Velocity

scholarly journals Role of Silicon Dioxide Filler on Mechanical and Dry Sliding Wear Behaviour of Glass-Epoxy Composites

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Naveed Anjum ◽  
S. L. Ajit Prasad ◽  
B. Suresha
Keyword(s):  
Silicon Dioxide ◽  
Sliding Wear ◽  
Wear Behaviour ◽  
Dry Sliding Wear ◽  
Wear Volume ◽  
Dry Sliding ◽  
Scanning Electron Micrographs ◽  
Sliding Velocity ◽  
Sliding Distance ◽  
Sliding Wear Behaviour

The mechanical properties and dry sliding wear behaviour of glass fabric reinforced epoxy (G-E) composite with varying weight percentage of silicon dioxide (SiO2) filler have been studied in the present work. The influence of sliding distance, velocity, and applied normal load on dry sliding wear behaviour has been considered using Taguchi's L9orthogonal array. Addition of SiO2increased the density, hardness, flexural, and impact strengths of G-E composite. Results of dry sliding wear tests showed increasing wear volume with increase in sliding distance, load, and sliding velocity for G-E and SiO2filled G-E composites. Taguchi's results indicate that the sliding distance played a significant role followed by applied load, sliding velocity, and SiO2loading. Scanning electron micrographs of the worn surfaces of composite samples at different test parameters show smooth surface, microploughing, and fine grooves under low load and velocity. However, severe damage of matrix with debonding and fiber breakage was seen at high load and velocity especially in unfilled G-E composite.

scholarly journals Impact-sliding wear response of 2.25Cr1Mo steel tubes: Experimental and semi-analytical method

Friction ◽  
2021 ◽  
Author(s):  
Meigui Yin ◽  
Chaise Thibaut ◽  
Liwen Wang ◽  
Daniel Nélias ◽  
Minhao Zhu ◽  
...  
Keyword(s):  
Sliding Wear ◽  
Power Plants ◽  
Mechanical Response ◽  
Wear Behavior ◽  
Wear Test ◽  
Steel Tube ◽  
Wear Depth ◽  
Sliding Velocity ◽  
Friction Forces ◽  
The Impact

AbstractThe impact-sliding wear behavior of steam generator tubes in nuclear power plants is complex owing to the dynamic nature of the mechanical response and self-induced tribological changes. In this study, the effects of impact and sliding velocity on the impact-sliding wear behavior of a 2.25Cr1Mo steel tube are investigated experimentally and numerically. In the experimental study, a wear test rig that can measure changes in the impact and friction forces as well as the compressive displacement over different wear cycles, both in real time, is designed. A semi-analytical model based on the Archard wear law and Hertz contact theory is used to predict wear. The results indicate that the impact dynamic effect by the impact velocity is more significant than that of the sliding velocity, and that both velocities affect the friction force and wear degree. The experimental results for the wear depth evolution agree well with the corresponding simulation predictions.

Dry Sliding Wear Behaviour of Magnesium nanocomposites using Response Surface Methodology

2021 ◽  
pp. 1-18
Author(s):  
Kartheesan S ◽  
B. Shahul hamid Khan ◽  
M Kamaraj ◽  
Manoj Gupta ◽  
Sravya Tekumalla
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Sliding Wear ◽  
Wear Behaviour ◽  
Design Parameters ◽  
Dry Sliding Wear ◽  
Wear Loss ◽  
Sliding Velocity ◽  
Sliding Distance ◽  
Sliding Wear Behaviour

Abstract In this study, a pure magnesium material reinforced with 0.5, 1, 1.5, and 2 weight % of CaO was prepared through disintegrated melt deposition technique. Nanocomposites were investigated for their sliding wear behaviour in dry condition at room temperature. Amount of CaO, Load, sliding distance, and Sliding velocity were selected as input design parameters at their five-level in central composite design using Minitab 18.1 statistical software. The influence of design parameters on wear loss is reported through the Response Surface Methodology (RSM). ANOVA was used to confirm the soundness of the developed regression equation. The results indicate the contribution of linear, quadratic, and interaction terms of design parameters on response. 3D response surface and 2D contour plots are indicated the interaction effect. The result shows that an increase in sliding velocity contributes to a decrease in the wear loss of the composites because of the emergence of protective oxidative layer at the surfaces of the pins, which is confirmed through FESEM and EDAX analysis of the pin surfaces. Wear loss of the material decreased as amount of CaO increased. The ANOVA analysis concluded that the sliding distance and load contribute significantly to wear loss of the composites and their percentage of contribution is 64.02 % and 3.69%.

Tubing String Thread Sealing Surfaces Damage Evaluation Based on Acoustic Elasticity Theory

2019 ◽  
Vol 944 ◽  
pp. 828-834 ◽  
Author(s):  
Jian Jun Wang ◽  
Jian Hua Sun ◽  
Shang Yu Yang ◽  
Yao Rong Feng ◽  
Kai Lin
Keyword(s):  
Surface Roughness ◽  
Elasticity Theory ◽  
Contact Stress ◽  
Surface Characterization ◽  
Surface Damage ◽  
Center Frequency ◽  
Sealing Performance ◽  
Tubing String ◽  
Acoustic Elasticity

During the processing of tubing premium threaded made up, the degree of the thread sealing surface intactness will directly affect the sealing performance of the string. Nevertheless, there are some difficulties to detect the damage of the engaged sealing surface effectively. In the present study the sealing surface damage was judged by the sealing surface contact stress’s relative changes according to the acoustic elasticity theory,. At the same time, the wear defects generated at the tubing sealing surface, during the tubing made up, contrasted with the wear and unworn surface roughness of coupling ultrasonic detected about the sealing surface. The results showed that with the acoustic amplitude evaluated the sealing contact stress was susceptible to the influence of surface roughness of coupling. But the reflection wave with the center frequency on the sealing surface characterization of the contact stress could avoid this problem effectively.

Multi-response optimization of tribological characteristics of aluminum MMCs using PCA

2014 ◽  
Vol 10 (2) ◽  
pp. 276-287
Author(s):  
Rajesh Siriyala ◽  
A. Gopala Krishna ◽  
P. Rama Murthy Raju ◽  
M. Duraiselvam
Keyword(s):  
Sliding Wear ◽  
Wear Behavior ◽  
Principal Component ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Sliding Velocity ◽  
Content Type ◽  
Wear Process ◽  
Response Optimization ◽  
Sliding Distance

Purpose – Since, wear is the one of the most commonly encountered industrial problems leading to frequent replacement of components there is a need to develop metal matrix composites (MMCs) for achieving better wear properties. The purpose of this paper is to fabricate aluminum MMCs to improve the dry sliding wear characteristics. An effective multi-response optimization approach called the principal component analysis (PCA) was used to identify the sets of optimal parameters in dry sliding wear process. Design/methodology/approach – The present work investigates the dry sliding wear behavior of graphite reinforced aluminum composites produced by the molten metal mixing method by means of a pin-on-disc type wear set up. Dry sliding wear tests were carried on graphite reinforced MMCs and its matrix alloy sliding against a steel counter face. Different contact stress, reinforcement percentage, sliding distance and sliding velocity were selected as the control variables and the response selected was wear volume loss (WVL) and coefficient of friction (COF) to evaluate the dry sliding performance. An L25 orthogonal array was employed for the experimental design. Optimization of dry sliding performance of the graphite reinforced MMCs was performed using PCA. Findings – Based on the PCA, the optimum level parameters for overall principal component (PC) of WVL and COF have been identified. Moreover, analysis of variance was performed to know the impact of individual factors on overall PC of WVL and COF. The results indicated that the reinforcement percentage was found to be most effective factor among the other control parameters on dry sliding wear followed by sliding distance, sliding velocity and contact stress. Finally the wear surface morphology of the composites has been investigated using scanning electron microscopy. Practical implications – Various manufacturing techniques are available for processing of MMCs. Each technique has its own advantages and disadvantages. In particular, some techniques are significantly expensive compared to others. Generally the manufacturer prefers the low cost technique. Therefore stir casting technique which was used in this paper for manufacturing of Aluminum MMCs is the best alternative for processing of MMCs in the present commercial sectors. Since the most important criteria of a dry sliding wear behavior is to provide lower WVL and COF, this study has intended to prove the application of PCA technique for solving multi objective optimization problem in wear applications like piston rings, piston rods, cylinder heads and brake rotors, etc. Originality/value – Application of multi-response optimization technique for evaluation of tribological characteristics for Aluminum MMCs made up of graphite particulates is a first-of-its-kind approach in literature. Hence PCA method can be successfully used for multi-response optimization of dry sliding wear process.

The Sliding Wear Behavior of Titanium Carbide Dispersion-Reinforced Steel

2007 ◽  
Vol 124-126 ◽  
pp. 1573-1576
Author(s):  
Jeong Keun Lee
Keyword(s):  
Wear Rate ◽  
Titanium Carbide ◽  
Sliding Wear ◽  
Wear Track ◽  
Tribological Behavior ◽  
Wear Behavior ◽  
Matrix Composites ◽  
Powder Metallurgy Technique ◽  
Sliding Velocity ◽  
Reinforced Steel

The tribological behavior of TiC-based metal matrix composites was investigated via measuring counterpart weight. The composites were prepared using powder metallurgy technique. Wear of counterpart by the composites varying from 35 to 45 % by volume Titanium carbide were observed over a load ranges of 9.81 to 49.05 N and sliding velocities of 2.0, 2.2, 2.4, 2.6, 2.8 and 3.0 m/sec. Detailed wear track micro-graphy was done to verify the effect of sliding condition on wear mechanism. Observations indicate that wear rate of counterpart increases with the increase in load and the sliding velocity and discontinuous wear rate change occurs at a certain load.

Sign in / Sign up

Export Citation Format

Share Document