scholarly journals Applications of solar and wind renewable energy in agriculture: A review

2019 ◽  
Vol 102 (2) ◽  
pp. 127-140 ◽  
Author(s):  
Yuliana de Jesus Acosta-Silva ◽  
Irineo Torres-Pacheco ◽  
Yasuhiro Matsumoto ◽  
Manuel Toledano-Ayala ◽  
Genaro Martín Soto-Zarazúa ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Fossil Fuels ◽  
Energy Systems ◽  
Energy System ◽  
Climate Control ◽  
Greenhouse Production ◽  
Renewable Energy Systems ◽  
Greenhouse Crops ◽  
Renewable Energy System ◽  
The Impact

The growing demand for food and the unstable price of fossil fuels has led to the search for environmentally friendly sources of energy. Energy is one of the largest overhead costs in the production of greenhouse crops for favorable climate control. The use of wind–solar renewable energy system for the control of greenhouse environments reduces fuel consumption and so enhances the sustainability of greenhouse production. This review describes the impact of solar–wind renewable energy systems in agricultural greenhouses.

scholarly journals Special Issue on Standalone Renewable Energy System: Modeling and Controlling

2020 ◽  
Vol 10 (6) ◽  
pp. 2068
Author(s):  
Rodolfo Dufo-López ◽  
José L. Bernal-Agustín
Keyword(s):  
Renewable Energy ◽  
System Modeling ◽  
Energy Systems ◽  
Energy System ◽  
Special Issue ◽  
Renewable Energy Systems ◽  
Electrical Grid ◽  
Renewable Energy System ◽  
Energy System Modeling

Standalone (off-grid) renewable energy systems supply electricity in places where there is no access to a standard electrical grid [...]

scholarly journals A Comparative Study of the Optimal Sizing and Management of Off-Grid Solar/Wind/Diesel and Battery Energy Systems for Remote Areas

2021 ◽  
Vol 9 ◽  
Author(s):  
M. Thirunavukkarasu ◽  
Yashwant Sawle
Keyword(s):  
Solar Wind ◽  
Renewable Energy ◽  
Rural Areas ◽  
Urban Areas ◽  
Tamil Nadu ◽  
Energy Systems ◽  
Energy System ◽  
Renewable Energy Systems ◽  
Cost Of Electricity ◽  
The Impact

Electrification in rural areas is relatively costly compared to urban areas. Therefore, the aim of this research is to identify the best combination of hybrid renewable energy systems (HRESs) to satisfy the load demand in a sustainable and cost-efficient way. The techno-economic study of stand-alone hybrid photovoltaic–wind turbine–diesel–battery-converter energy systems based on the hybrid optimization model for electric renewable (HOMER) simulation has been analyzed for various locations in the Tamil Nadu state, India. Various combinations of the systems have been compared and analyzed based on the performance of their technical parameters, costs, the electrical power production of each source, and unmet load. The findings indicated that the off-grid solar–wind–diesel–battery configuration is the most economical for all the sites among other system configurations. Comparing with conventional diesel generators among all the locations, a combination of solar/wind/diesel/battery is the economically best design for Thoothukudi, with the least and most reliable solution in terms of net present cost and cost of energy. Also, the impact of intermittent variables becomes significant, so sensitivity analysis for the various parameters has been carried out. The study finds that the least cost of electricity and the net present cost of electricity for Thoothukudi are achieved at 0.266 $/kWh and 138,197 $, respectively. This is economical compared to a stand-alone diesel system where the obtained COE is $1.88 and the NPC is $977523. In the stand-alone diesel operating mode, 41854 kg of CO2 is produced, which is higher than CO2 emissions associated with any other renewable energy systems. According to the results, the Kanyakumari location outperforms in terms of producing environmental pollutants with emission of 1,020 kg/y CO2 at their best. Moreover, the results of the proposed study imply that the proposed renewable energy system in remote sites could be a more economical measure.

scholarly journals Fuzzy Logic Based Controller with Dedicated Safety Function for Hybrid Renewable Energy System

2018 ◽  
pp. 1-13
Author(s):  
Nnadozie Emmanuel Chibuikem ◽  
Oparaku Ogbonna Ukachukwu
Keyword(s):  
Fuzzy Logic ◽  
Renewable Energy ◽  
Energy Flow ◽  
Fossil Fuels ◽  
Energy Systems ◽  
Energy System ◽  
Renewable Energy Systems ◽  
Hybrid Renewable Energy Systems ◽  
Hybrid Renewable Energy System ◽  
Hybrid Renewable Energy

For the dual reasons of energy security and environmental and climate preservation, there has been a global campaign for drastic reduction in the use of fossil fuels and a consequential aggressive pursuit for the development of clean energy systems. Hybrid renewable energy systems, ahead of single source renewable energy systems, promise to be an effective alternative to the use of fossil fuels. However, if hybrid renewable energy systems must effectively and reliably serve as an alternative to fossil fuel use, then improvements in the control and management of energy flow among the renewable energy supplies, energy storage components, and the load is of very vital significance. More intelligent and optimized, and easy-to-develop control techniques need to be introduced to replace already existing conventional techniques. And very importantly, extra measures have to be taken to ensure longer battery life and the overall safety of the system. This work is a design of a fuzzy logic-based control system for managing energy flow in a hybrid renewable energy system. A dedicated output was incorporated in the fuzzy controller for controlling the load connection status. The results showed that the fuzzy logic controller accurately emulated expert decisions in monitoring the battery state-of-charge and renewable energy supply capacities, and effectively determining and controlling the battery charging and discharging functions. The employment of fuzzy logic control in the system eliminated the need for complex and tedious mathematical modelling as required in conventional control methods. Thus the system was easier to develop.

scholarly journals The Impact of Temporal Complexity Reduction on a 100% Renewable European Energy System with Hydrogen Infrastructure

2019 ◽  
Author(s):  
Dilara Gulcin Caglayan ◽  
Heidi Ursula Heinrichs ◽  
Detlef Stolten ◽  
Martin Robinius
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Alternative Energy ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Promising Alternative ◽  
Renewable Energy System ◽  
Hydrogen Infrastructure ◽  
Storage Technologies ◽  
The Impact

The transition towards a renewable energy system is essential in order to reduce greenhouse gas emissions. The increase in the share of variable renewable energy sources (VRES), which mainly comprise wind and solar energy, necessitates storage technologies by which the intermittency of VRES can be compensated for. Although hydrogen has been envisioned to play a significant role as a promising alternative energy carrier in a future European VRES-based energy concept, the optimal design of this system remains uncertain. In this analysis, a hydrogen infrastructure is posited that would meet the electricity and hydrogen demand for a 100% renewable energy-based European energy system in the context of 2050. The overall system design is optimized by minimizing the total annual cost. Onshore and offshore wind energy, open-field photovoltaics (PV), rooftop PV and hydro energy, as well as biomass, are the technologies employed for electricity generation. The electricity generated is then either transmitted through the electrical grid or converted into hydrogen by means of electrolyzers and then distributed through hydrogen pipelines. Battery, hydrogen vessels and salt caverns are considered as potential storage technologies. In the case of a lull, stored hydrogen can be re-electrified to generate electricity to meet demand during that time period. For each location, eligible technologies are introduced, as well as their maximum capacity and hourly demand profiles, in order to build the optimization model. In addition, a generation time series for VRES has been exogenously derived for the model. The generation profiles of wind energy have been investigated in detail by considering future turbine designs with high spatial resolution. In terms of salt cavern storage, the technical potential for hydrogen storage is defined in the system as the maximum allowable capacity per region. Whether or not a technology is installed in a region, the hourly operation of these technologies, as well as the cost of each technology, are obtained within the optimization results. It is revealed that a 100 percent renewable energy system is feasible and would meet both electricity demand and hydrogen demand in Europe.

scholarly journals Multi-Objective Decision-Making for Hybrid Renewable Energy Systems for Cities: A Case Study of Xiongan New District in China

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6223
Author(s):  
Bin Ye ◽  
Minhua Zhou ◽  
Dan Yan ◽  
Yin Li
Keyword(s):  
Decision Making ◽  
Renewable Energy ◽  
Energy Systems ◽  
Energy System ◽  
Energy Utilization ◽  
Target Area ◽  
Renewable Energy Systems ◽  
Multi Objective ◽  
Hybrid Renewable Energy Systems ◽  
Hybrid Renewable Energy

The application of renewable energy has become increasingly widespread worldwide because of its advantages of resource abundance and environmental friendliness. However, the deployment of hybrid renewable energy systems (HRESs) varies greatly from city to city due to large differences in economic endurance, social acceptance and renewable energy endowment. Urban policymakers thus face great challenges in promoting local clean renewable energy utilization. To address these issues, this paper proposes a combined multi-objective optimization method, and the specific process of this method is described as follows. The Hybrid Optimization Model for electric energy was first used to examine five different scenarios of renewable energy systems. Then, the Technique for Order Preference by Similarity to an Ideal Solution was applied using eleven comprehensive indicators to determine the best option for the target area using three different weights. To verify the feasibility of this method, Xiongan New District (XND) was selected as an example to illustrate the process of selecting the optimal HRES. The empirical results of simulation tools and multi-objective decision-making show that the Photovoltaic-Diesel-Battery off-grid energy system (option III) and PV-Diesel-Hydrogen-Battery off-grid energy system (option V) are two highly feasible schemes for an HRES in XND. The cost of energy for these two options is 0.203 and 0.209 $/kWh, respectively, and the carbon dioxide emissions are 14,473 t/yr and 345 t/yr, respectively. Our results provide a reference for policymakers in deploying an HRES in the XND area.

scholarly journals The contribution of distributed flexibility potentials to corrective transmission system operation for strongly renewable energy systems

2020 ◽  
Author(s):  
Till Kolster ◽  
Rainer Krebs ◽  
Stefan Niessen ◽  
Mathias Duckheim
Keyword(s):  
Renewable Energy ◽  
Distribution Systems ◽  
Renewable Energy Sources ◽  
Energy Systems ◽  
Energy System ◽  
Transmission System ◽  
System Operation ◽  
Renewable Energy Systems ◽  
Flexibility Options ◽  
Distribution Grids

<div>Corrective transmission system operation can help integrate more renewable energy sources and save redispatch costs by providing a higher utilization of the power grid.</div><div>However, reliable and fast provision of flexibility are key to achieve corrective operation. <br></div><div>This work develops a new method to determine if flexibility from distribution grids is available on transmission corridors when needed. An analysis of the German energy system in the year 2030 is performed to estimate the potential of different flexibility options and shows the potential flexibility distribution systems can contribute to a corrective transmission system operation.<br> </div>

scholarly journals Simulation model of PID for DC-DC converter by using MATLAB

2021 ◽  
Vol 11 (5) ◽  
pp. 3791
Author(s):  
Salam Waley Shneen ◽  
Dina Harith Shaker ◽  
Fatin Nabeel Abdullah
Keyword(s):  
Renewable Energy ◽  
Control Systems ◽  
Energy Systems ◽  
Energy System ◽  
Climatic Conditions ◽  
Power Electronic ◽  
Renewable Energy Systems ◽  
System States ◽  
And Control ◽  
Setting Parameters

The change in loads in most applications whose source of nutrition is a renewable energy system. Renewable energy systems can change according to climatic conditions. To control and control these changes, the use of conventional control systems such as PIDs. The PID is one of the most common and used conventional control systems that have been chosen to output the type of power electronic devise (DC-DC converter) in different working conditions. The current study aims to improve the system performance through simulation. Simulation results demonstrate the effectiveness of the system with the controller based on setting parameters such as recording system states, embedded elevation time and transient response.

scholarly journals Robust Design Optimization of Electromagnetic Actuators for Renewable Energy Systems Considering the Manufacturing Cost

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4353 ◽  
Author(s):  
Jie Deng ◽  
Xiaohan Liu ◽  
Guofu Zhai
Keyword(s):  
Renewable Energy ◽  
Robust Design ◽  
Manufacturing Process ◽  
Energy Systems ◽  
Photovoltaic System ◽  
Robust Design Optimization ◽  
Manufacturing Cost ◽  
Electromagnetic Actuators ◽  
Renewable Energy Systems ◽  
The Impact

Power transmission and protection of power electronics–electromagnetic actuators are crucial parts in renewable energy systems (energy management of photovoltaic, wind power, hybrid and electric vehicles). Consistency optimization of electromagnetic actuators has attracted extensive attention from corporations in competitive markets. Robust design has been widely applied for reducing the influence of uncertainties in the manufacturing process to improve the consistency of product quality. However, the cost factors of the actual manufacturing process are not fully considered in state-of-art methods. Although the consistency has been improved, the optimization scheme may not be optimal from the perspective of engineering applications, because unnecessary cost increments may be produced. In this paper, an application-oriented robust design method for consistency optimization is proposed. The impact of tolerance values on quality loss and manufacturing cost can be considered simultaneously to guide the tolerance optimization process. Thus, the optimal solution of total loss is obtained by optimizing the quality fluctuation to the design objective with the minimum increment of manufacturing cost. An example of the consistency optimization of an electromagnetic actuator used in the photovoltaic system is presented to illustrate the procedure and verify the effectiveness of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document