Electromagnetic interference shielding effectiveness of polypyrrole-silver nanocomposite films on silane-modified flexible sheet

2021 ◽  
pp. 095400832110645
Author(s):  
Karim Benzaoui ◽  
Achour Ales ◽  
Ahmed Mekki ◽  
Abdelhalim Zaoui ◽  
Boudjemaa Bouaouina ◽  
...  
Keyword(s):  
Surface Treatment ◽  
Electromagnetic Interference ◽  
Nanocomposite Films ◽  
Electrical Characteristics ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Silver Nanocomposite ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se

The conventional electromagnetic interference (EMI) shielding materials are being gradually replaced by a new generation of supported conducting polymer composites (CPC) films due to their many advantages. This work presents a contribution on the effects of silane surface–modified flexible polypyrrole-silver nanocomposite films on the electromagnetic interference shielding effectiveness (EMI-SE). Thus, the UV-polymerization was used to in-situ deposit the PPy-Ag on the biaxial oriented polyethylene terephthalate (BOPET) flexible substrates whose surfaces were treated by 3-aminopropyltrimethoxysilane (APTMS). X-ray Photoelectron Spectroscopy (XPS) analyzes confirmed the APTMS grafting procedure. Structural, morphological, thermal, and electrical characteristics of the prepared films were correlated to the effect of substrate surface treatment. Thereafter, EMI-SE measurements of the elaborated films were carried out as per ASTM D4935 standard for a wide frequency band extending from 50 MHz to 18 GHz. The obtained results confirmed that the APTMS-treated BOPET film exhibit higher EMI shielding performance and better electrical characteristics compared to the untreated film. In fact, a 32% enhancement of EMI-SE was noted for the treated films compared to the untreated ones. Overall, these results put forward the role played by the surface treatment in strengthening the position of flexible PPy-Ag supported films as high-performance materials in electronic devices and electromagnetic interference shielding applications.

scholarly journals A Healable and Mechanically Enhanced Composite with Segregated Conductive Network Structure for High-Efficient Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Ting Wang ◽  
Wei-Wei Kong ◽  
Wan-Cheng Yu ◽  
Jie-Feng Gao ◽  
Kun Dai ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Diels Alder ◽  
Electrostatic Attraction ◽  
List Type ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Elongation At Break ◽  
High Efficient ◽  
Emi Se

Highlights The cationic waterborne polyurethanes microspheres with Diels-Alder bonds were synthesized for the first time. The electrostatic attraction not only endows the composite with segregated structure to gain high electromagnetic-interference shielding effectiveness, but also greatly enhances mechanical properties. Efficient healing property was realized under heating environment. Abstract It is still challenging for conductive polymer composite-based electromagnetic interference (EMI) shielding materials to achieve long-term stability while maintaining high EMI shielding effectiveness (EMI SE), especially undergoing external mechanical stimuli, such as scratches or large deformations. Herein, an electrostatic assembly strategy is adopted to design a healable and segregated carbon nanotube (CNT)/graphene oxide (GO)/polyurethane (PU) composite with excellent and reliable EMI SE, even bearing complex mechanical condition. The negatively charged CNT/GO hybrid is facilely adsorbed on the surface of positively charged PU microsphere to motivate formation of segregated conductive networks in CNT/GO/PU composite, establishing a high EMI SE of 52.7 dB at only 10 wt% CNT/GO loading. The Diels–Alder bonds in PU microsphere endow the CNT/GO/PU composite suffering three cutting/healing cycles with EMI SE retention up to 90%. Additionally, the electrostatic attraction between CNT/GO hybrid and PU microsphere helps to strong interfacial bonding in the composite, resulting in high tensile strength of 43.1 MPa and elongation at break of 626%. The healing efficiency of elongation at break achieves 95% when the composite endured three cutting/healing cycles. This work demonstrates a novel strategy for developing segregated EMI shielding composite with healable features and excellent mechanical performance and shows great potential in the durable and high precision electrical instruments.

Tunable electromagnetic interference shielding ability of MXene/chitosan/silver nanowire sandwich films

2021 ◽  
pp. 2151041
Author(s):  
Wei Wang ◽  
Xiaoyu Bing ◽  
Yutong Zhou ◽  
Miaomiao Geng ◽  
Yanhu Zhan ◽  
...  
Keyword(s):  
Thin Films ◽  
Electromagnetic Interference ◽  
Hybrid Composites ◽  
Core Layer ◽  
Structure Design ◽  
Silver Nanowire ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se

The structural design of thin films is attracting attention in academia and industry in attempts to improve electromagnetic interference shielding effectiveness (EMI SE). In this study, MXene/chitosan/silver nanowire (AgNW) sandwich films, in which the AgNW core layer was bordered by two MXene/chitosan layers, were fabricated by vacuum-assisted filtration. Because of the interconnected AgNWs in the core layer and the aligned MXene sheets in the MXene/chitosan layers, the electrical conductivity of the sandwich film reached 11,459.1 S/m. Consequently, the sandwich film exhibited an SE value of 82.3 dB. What is more, when both the AgNW and MXene contents were 33.3%, the sandwich film’s EMI SE divided by its thickness was 26,167 dB/cm, which was much superior to the values reported for inorganic hybrid composites and polymer composites filled with hybrid fillers. Such a simple approach was proved to be an effective way for further structure design of thin films in EMI shielding field.

Microwave Irradiation of Graphene Aerogel and Its Use on the Electromagnetic Interference Shielding of BMI Nanocomposites

NANO ◽  
2020 ◽  
Vol 15 (11) ◽  
pp. 2050143
Author(s):  
Bowen Feng ◽  
Wei Li ◽  
Fei Xue ◽  
Xingyu Tong ◽  
Jiaying Li ◽  
...  
Keyword(s):  
Self Assembly ◽  
Electromagnetic Interference ◽  
Chemical Reduction ◽  
Three Dimensional ◽  
Microwave Treatment ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding ◽  
Graphene Aerogels ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se

In this work, graphene aerogels (GAs) with three-dimensional interconnected networks were prepared by chemical reduction and self-assembly of graphene oxide sheets. After microwave treatment, obtained microwave reduced graphene aerogels (MRGAs) were used in the preparation of bismaleimide (BMI) composites. The results show that the microwave treatment significantly enhanced the quality of GAs, and the three-dimensional networks in the GAs were well retained. Moreover, the MRGAs were highly efficient in endowing BMI with high electrical conductivity and excellent electromagnetic interference shielding effectiveness (EMI SE). The conductivity of MRGA/BMI composites was 42–68% higher than that of GA/BMI composites. When the filler content is 1.6 wt.%, the EMI SE of MRGA/BMI composite was 32.3% higher than that of GA/BMI composite in the X band.

Facile fabrication of ultrathin graphene film with ultrahigh electrical conductivity and superb electromagnetic interference shielding effectiveness

2021 ◽  
Vol 9 (1) ◽  
pp. 214-222
Author(s):  
Xiaojing Liu ◽  
Wenyu Wu ◽  
Bin Guo ◽  
Minghao Cui ◽  
Huaxin Ma ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Self Assembly ◽  
Electromagnetic Interference ◽  
Graphene Film ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Graphene Films ◽  
Facile Fabrication ◽  
Electromagnetic Interference Shielding Effectiveness

Graphene films prepared through a self-assembly of graphene oxide and its derivatives have been recently explored for electromagnetic interference (EMI) shielding applications.

Flexible few-layered graphene/poly vinyl alcohol composite sheets: synthesis, characterization and EMI shielding in X-band through the absorption mechanism

RSC Advances ◽  
2015 ◽  
Vol 5 (46) ◽  
pp. 36498-36506 ◽  
Author(s):  
Sandeep K. Marka ◽  
Bashaiah Sindam ◽  
K. C. James Raju ◽  
Vadali V. S. S. Srikanth
Keyword(s):  
Electromagnetic Interference ◽  
Vinyl Alcohol ◽  
Poly Vinyl Alcohol ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Composite Sheet ◽  
Absorption Mechanism ◽  
X Band ◽  
Electromagnetic Interference Shielding Effectiveness

An excellent electromagnetic interference shielding effectiveness of ∼19.5 dB was measured for a 1 mm thick flexible few-layered graphene (FLG)/PVA composite sheet owing to the formation of network-like features by FLG in the PVA matrix.

Outstanding electromagnetic interference shielding effectiveness of polyvinylbutyral–polyaniline nanocomposite film

RSC Advances ◽  
2016 ◽  
Vol 6 (82) ◽  
pp. 79058-79065 ◽  
Author(s):  
Pritom J. Bora ◽  
Gaurav Lakhani ◽  
Praveen C. Ramamurthy ◽  
Giridhar Madras
Keyword(s):  
Electromagnetic Interference ◽  
Nanocomposite Film ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Solution Processed ◽  
X Band ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Polyaniline Nanocomposite ◽  
Ku Band

In this study, we studied the electromagnetic interference (EMI) shielding property of a solution processed polyvinylbutyral–polyaniline nanocomposite (PVBPN) film in the X-band (8.2–12.4 GHz) and Ku-band (12.4–18 GHz) frequency.

scholarly journals Mesocarbon microsphere composites with Fe3O4 nanoparticles for outstanding electromagnetic interference shielding effectiveness

RSC Advances ◽  
2015 ◽  
Vol 5 (54) ◽  
pp. 43279-43289 ◽  
Author(s):  
Ridham Dhawan ◽  
Saroj Kumari ◽  
Rajeev Kumar ◽  
S. K. Dhawan ◽  
Sanjay R. Dhakate
Keyword(s):  
Fe3o4 Nanoparticles ◽  
Electromagnetic Interference ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Emi Shielding Effectiveness ◽  
Electromagnetic Interference Shielding Effectiveness

In situ, development of mesocarbon microsphere (MCMS) composites with magnetic Fe3O4 nanoparticles for outstanding electromagnetic (EMI) shielding effectiveness.

EMI Shielding Effectiveness of CNTs Composites

2013 ◽  
Vol 331 ◽  
pp. 439-442 ◽  
Author(s):  
Ping Li ◽  
Aik Seng Low ◽  
Yue Yan Shan ◽  
Guat Choon Ong ◽  
Xi Jiang Yin
Keyword(s):  
Carbon Nanotubes ◽  
Electromagnetic Interference ◽  
Conductive Network ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Frequency Range ◽  
Electromagnetic Interference Shielding ◽  
Emi Shielding Effectiveness ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
5 Ghz

A carbon nanotubes (CNTs) composite and its electromagnetic interference shielding effectiveness (SE) were investigated. Its absorptance, reflectance and shielding effectiveness (SE) were analysed. The CNTs composite has a shielding effectiveness (SE) of more than 25 dB (>99.68%) in frequency range from 30 MHz to 5 GHz. The testing results also demonstrate that the shielding mechanism of the CNTs composite is mainly EMI absorption of electromagnitic radiation. The high SE of the CNTs composite in the study is attributed to a high aspect ratio (>3000) and good conductive network of CNTs within the composite.

Sign in / Sign up

Export Citation Format

Share Document