Effects of Cu–Ag hybrid nanoparticles on the momentum and thermal boundary layer flow over the wedge

2019 ◽  
Vol 233 (5) ◽  
pp. 1128-1136 ◽  
Author(s):  
Mohsan Hassan ◽  
Abrar Faisal ◽  
Irfan Ali ◽  
Muhammad Mubashir Bhatti ◽  
Muhammad Yousaf
Keyword(s):  
Heat Transfer ◽  
Boundary Layers ◽  
Heat Transfer Performance ◽  
Convective Heat Transfer Coefficient ◽  
Velocity Profiles ◽  
Hybrid Nanoparticles ◽  
Heat Transfer Fluid ◽  
Hybrid Nanofluid ◽  
Transfer Performance ◽  
Hybrid Nanomaterial

In this work, the effects of hybrid nanoparticles on the momentum and thermal boundary layers as well as flow characteristics and thermal performance of the hybrid nanofluid are investigated over the wedge. The fluid in the enclosure is water containing hybrid nanoparticles Cu–Ag. The physical model of homogenous hybrid nanofluid is derived using the elementary equations of thermo-hydrodynamic and co-relation's model of a mixture that supports the effective physical features. The results are calculated to measure the effects of nanoparticle concentration on thermal and momentum boundary layers and displayed in graphs for discussions. In addition, the effects of nanoparticles concentration and different compositions of hybrid nanoparticles on temperature and velocity profiles, physical properties, skin friction, and convective heat transfer coefficient are deliberated through graphs and tables. To check its heat transfer performance, a comparison of hybrid nanofluid is made between the base fluid and single material nanofluids. It is found that the efficiency of hybrid nanofluids as a heat transfer fluid is much more than conventional fluids or single nanoparticles-based nanofluids. These results in terms of boundary layers phenomena, heat transfer performance, and temperature and velocity profiles under hybrid nanomaterial could help chemical engineers to design the critical equipment in a process industry such as heat exchangers and pumps and others.

scholarly journals Effect of Magnetic Nanofluids on the Performance of a Fin-Tube Heat Exchanger

2021 ◽  
Vol 11 (19) ◽  
pp. 9261
Author(s):  
Yun-Seok Choi ◽  
Youn-Jea Kim
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Magnetic Fields ◽  
Heat Transfer Performance ◽  
Permanent Magnets ◽  
Convective Heat Transfer Coefficient ◽  
Transfer Performance ◽  
Tube Heat Exchanger ◽  
Improve Heat Transfer ◽  
Fin Tube

As electrical devices become smaller, it is essential to maintain operating temperature for safety and durability. Therefore, there are efforts to improve heat transfer performance under various conditions, such as using extended surfaces and nanofluids. Among them, cooling methods using ferrofluid are drawing the attention of many researchers. This fluid can control the movement of the fluid in magnetic fields. In this study, the heat transfer performance of a fin-tube heat exchanger, using ferrofluid as a coolant, was analyzed when external magnetic fields were applied. Permanent magnets were placed outside the heat exchanger. When the magnetic fields were applied, a change in the thermal boundary layer was observed. It also formed vortexes, which affected the formation of flow patterns. The vortex causes energy exchanges in the flow field, activating thermal diffusion and improving heat transfer. A numerical analysis was used to observe the cooling performance of heat exchangers, as the strength and number of the external magnetic fields were varying. VGs (vortex generators) were also installed to create vortex fields. A convective heat transfer coefficient was calculated to determine the heat transfer rate. In addition, the comparative analysis was performed with graphical results using contours of temperature and velocity.

scholarly journals Augmentation of the Heat Transfer Performance of a Sinusoidal Corrugated Enclosure by Employing Hybrid Nanofluid

2014 ◽  
Vol 6 ◽  
pp. 147059 ◽  
Author(s):  
Behrouz Takabi ◽  
Saeed Salehi
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Performance ◽  
Heated Surface ◽  
Pure Water ◽  
Maximum Error ◽  
Temperature Fields ◽  
Working Fluid ◽  
Hybrid Nanofluid ◽  
Transfer Performance ◽  
Lower Temperature

This paper numerically examines laminar natural convection in a sinusoidal corrugated enclosure with a discrete heat source on the bottom wall, filled by pure water, Al2O3/water nanofluid, and Al2O3-Cu/water hybrid nanofluid which is a new advanced nanofluid with two kinds of nanoparticle materials. The effects of Rayleigh number (103≤Ra≤106) and water, nanofluid, and hybrid nanofluid (in volume concentration of 0% ≤ ϕ ≤ 2%) as the working fluid on temperature fields and heat transfer performance of the enclosure are investigated. The finite volume discretization method is employed to solve the set of governing equations. The results indicate that for all Rayleigh numbers been studied, employing hybrid nanofluid improves the heat transfer rate compared to nanofluid and water, which results in a better cooling performance of the enclosure and lower temperature of the heated surface. The rate of this enhancement is considerably more at higher values of Ra and volume concentrations. Furthermore, by applying the modeling results, two correlations are developed to estimate the average Nusselt number. The results reveal that the modeling data are in very good agreement with the predicted data. The maximum error for nanofluid and hybrid nanofluid was around 11% and 12%, respectively.

scholarly journals CFD analysis of heat transfer performance of graphene based hybrid nanofluid in radiators

2018 ◽  
Vol 346 ◽  
pp. 012084 ◽  
Author(s):  
Bharath R Bharadwaj ◽  
K Sanketh Mogeraya ◽  
D M Manjunath ◽  
Babu Rao Ponangi ◽  
K S Rajendra Prasad ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Performance ◽  
Hybrid Nanofluid ◽  
Transfer Performance ◽  
Cfd Analysis

Impingement Heat Transfer of Various Lobe-Shaped Nozzles

2019 ◽  
Author(s):  
Sanskar S. Panse ◽  
Srivatsan Madhavan ◽  
Prashant Singh ◽  
Srinath V. Ekkad
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Heat Transfer Performance ◽  
Convective Heat Transfer Coefficient ◽  
Transfer Performance ◽  
Impingement Heat Transfer ◽  
Circular Jets ◽  
Contour Plots ◽  
Drastic Effect

Abstract This paper presents heat transfer characteristics of lobed nozzles, three different lobe configurations viz. three-, four- and six-lobe jets have been tested over a range of Reynolds numbers (based on the effective jet diameter, de) between 8000 and 16000 and normalized jet-to-target spacings (z/de) of 1.6, 3.2 and 4.8. The heat transfer results of lobed configurations were compared to the baseline configuration of circular jets. Steady-state infrared thermography (IRT) experiments were carried out for convective heat transfer coefficient calculations. Experimental results show that the three lobe configuration has a superior heat transfer performance compared to other configurations. Jet-to-target plate standoff distance had drastic effect on the heat transfer performance and contour plots for the lobed nozzles, as heat transfer performance diminished with increase in z/de. For the lobe configurations, with increase in jet-to-target spacing (z/de), the heat transfer coefficient maps tend towards a more circular profile due to the effect of jet diffusion.

Two-Phase Heat Transfer Performance of Dielectric Fluid HFE-7100 Within Multiport Microchannel

2008 ◽  
Author(s):  
Lung-Yi Lin ◽  
Yeau-Ren Jeng ◽  
Chi-Chuan Wang
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Single Phase ◽  
Heat Transfer Performance ◽  
Convective Heat Transfer Coefficient ◽  
Dielectric Fluid ◽  
Transfer Performance ◽  
Two Phase ◽  
Two Phase Heat Transfer

This study presents convective single-phase and boiling two-phase heat transfer performance of HFE-7100 coolant within multi-port microchannel heat sinks. The corresponding hydraulic diameters are 450 and 237 μm, respectively. For single-phase results, the presence of inlet/outlet locations inevitably gives rise to considerable increase of total pressure drop of a multi-port microchannel heat sink whereas has virtually no detectable influence on overall heat transfer performance provided that the effect of entrance has been accounted for. The convective boiling heat transfer coefficient for the HFE-7100 coolant shows a tremendous drop when vapor quality is above 0.6. For Dh = 450 μm, it is found that the mass flux effect on the convective heat transfer coefficient is rather small.

Effect of Magnetic Field on the Laminar Heat Transfer Performance of Hybrid Nanofluid in a Lid Driven Cavity Over Solid Block

2020 ◽  
Author(s):  
Rajesh Nimmagadda ◽  
Durga Prakash Matta ◽  
Rony Reuven ◽  
Lazarus Godson Asirvatham ◽  
Somchai Wongwises ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Uniform Magnetic Field ◽  
Conjugate Heat Transfer ◽  
Heat Transfer Performance ◽  
Hybrid Nanofluid ◽  
Transfer Performance ◽  
Driven Cavity ◽  
The Magnetic Field ◽  
Solid Block

Abstract A 2D numerical investigation has been carried out to obtain the heat transfer performance of hybrid (Al2O3 + Ag) nanofluid in a lid driven cavity over solid block under the influence of uniform as well as non-uniform magnetic field. The geometrical domain consists of a cavity containing nanofluid that is driven by means of lid moving in one direction. This circulating nanofluid will extract enormous amount of heat from the solid block underneath the cavity resulting in conjugate heat transfer. A homogenous solver based on the finite volume method with conjugate heat transfer was developed and adopted in the existing study. The heat efficient hybrid nanofluid (HyNF) pair (2.4 vol.% Ag + 0.6 vol.% Al2O3) obtained by Nimmagadda and Venkatasubbaiah [1] is used in the present investigation. Moreover, efficient non-uniform sinusoidal magnetic field identified by Nimmagadda et al. [2] is also implemented and compared with uniform magnetic field. Furthermore, the magnetic field is applied over the geometrical domain along the two axial directions separately and the effective heat transfer performance is obtained. The significant impact of extensive parameters like Reynolds number, nanoparticle type, nanoparticle concentration, magnetic field type, magnetic field location and the strength of the magnetic field on heat transfer performance are systematically analyzed and presented.

Experimental investigation of heat transfer performance and frictional loss of functionalized GNP-based water coolant in a closed conduit flow

RSC Advances ◽  
2016 ◽  
Vol 6 (6) ◽  
pp. 4552-4563 ◽  
Author(s):  
K. H. Solangi ◽  
Ahmad Amiri ◽  
M. R. Luhur ◽  
Soheila Ali Akbari Ghavimi ◽  
S. N. Kazi ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Performance ◽  
Convective Heat Transfer Coefficient ◽  
Transfer Performance ◽  
Water Coolant ◽  
Frictional Loss ◽  
Graphene Nanoplatelet ◽  
Conduit Flow ◽  
Poly Propylene ◽  
Closed Conduit

The convective heat transfer coefficient and friction factor of trimethylolpropane tris[poly(propylene glycol), amine terminated] ether-treated graphene nanoplatelet-based water coolants are investigated.

scholarly journals Investigation of the Thermal Conductivity, Viscosity, and Thermal Performance of Graphene Nanoplatelet-Alumina Hybrid Nanofluid in a Differentially Heated Cavity

2021 ◽  
Vol 9 ◽  
Author(s):  
Adeola O. Borode ◽  
Noor A. Ahmed ◽  
Peter A. Olubambi ◽  
Mohsen Sharifpur ◽  
Josua P. Meyer
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Transfer Performance ◽  
Temperature Gradients ◽  
Hybrid Nanofluid ◽  
Mixing Ratio ◽  
Graphene Nanoplatelet ◽  
Hybrid Nanomaterial ◽  
Mixing Ratios ◽  
Hybrid Nanofluids

This paper investigates the thermophysical properties and heat transfer performance of graphene nanoplatelet (GNP) and alumina hybrid nanofluids at different mixing ratios. The electrical conductivity and viscosity of the nanofluids were obtained at temperatures between 15–55°C. The thermal conductivity was measured at temperatures between 20–40°C. The natural convection properties, including Nusselt number, Rayleigh number, and heat transfer coefficient, were experimentally obtained at different temperature gradients (20, 25, 30, and 35°C) in a rectangular cavity. The Mouromtseff number was used to theoretically estimate all the nanofluids’ forced convective performance at temperatures between 20–40°C. The results indicated that the thermal conductivity and viscosity of water are increased with the hybrid nanomaterial. On the other hand, the viscosity and thermal conductivity of the hybrid nanofluids are lesser than that of mono-GNP nanofluids. Notwithstanding, of all the hybrid nanofluids, GNP-alumina hybrid nanofluid with a mixing ratio of 50:50 and 75:25 were found to have the highest thermal conductivity and viscosity, enhancing thermal conductivity by 4.23% and increasing viscosity by 15.79%, compared to water. Further, the addition of the hybrid nanomaterials improved the natural convective performance of water while it deteriorates with mono-GNP. The maximum augmentation of 6.44 and 10.48% were obtained for Nuaverage and haverage of GNP-Alumina (50:50) hybrid nanofluid compared to water, respectively. This study shows that hybrid nanofluids are more effective for heat transfer than water and mono-GNP nanofluid.

Sign in / Sign up

Export Citation Format

Share Document