Development and validation of a hybrid method for predicting helicopter rotor impulsive noise

2018 ◽  
Vol 233 (4) ◽  
pp. 1323-1339 ◽  
Author(s):  
Liangquan Wang ◽  
Guohua Xu ◽  
Yongjie Shi
Keyword(s):  
Hybrid Method ◽  
High Speed ◽  
Stokes Equations ◽  
Impulsive Noise ◽  
Computational Cost ◽  
Helicopter Rotor ◽  
Aerodynamic Load ◽  
Vortex Interaction ◽  
Blade Vortex Interaction ◽  
Hybrid Solver

Prediction of helicopter rotor impulsive noise is practically a very challenging task. This paper describes a hybrid method to predict rotor impulsive noise for both high-speed impulsive noise and blade–vortex interaction noise. The hybrid solver has been developed by combining the advantages of three different methods: (1) a computational fluid dynamics method based on Reynolds-averaged Navier–Stokes equations to account for the viscous and compressible effects near the blade; (2) a vorticity transport model to predict rotor wake system without artificial dissipation; and (3) an acoustic calculation method, based on Ffowcs-Williams Hawkings equation implemented to a permeable data surface. The developed hybrid solver is validated through available test data, for the cases of UH-1H model rotor, AH-1 Operational Loads Survey rotor, and Helishape 7A rotor. Peak sound pressure level of high-speed impulsive noise is accurately predicted with relative errors less than 7%. Additionally, acoustic waveform of blade–vortex interaction noise is well captured though it is sensitive to small changes in aerodynamic load. It is suggested that present hybrid method is versatile for the prediction of rotor impulsive noise with moderate computational cost.

A modified near wake dynamic model for rotor analysis

1999 ◽  
Vol 103 (1021) ◽  
pp. 143-146 ◽  
Author(s):  
T. Wang ◽  
F. N. Coton
Keyword(s):  
High Resolution ◽  
Dynamic Model ◽  
Numerical Evaluation ◽  
Helicopter Rotor ◽  
Vortex Interaction ◽  
Near Wake ◽  
Blade Vortex Interaction ◽  
Wake Model ◽  
Induced Velocity

Abstract The Beddoes near wake model, developed for high resolution blade vortex interaction computations, enables efficient numerical evaluation of the downwash due to trailed vorticity in the near wake of a helicopter rotor. The model is, however, limited by the assumption that the near wake lies in the plane of the rotor and, in some cases, by its inability to accurately evaluate the induced velocity contribution from vorticity trailed from inboard blade sections. In this paper, modifications to the method are proposed which address these issues and allow it to be used with confidence over a wider range of rotor flows.

scholarly journals Efficient and Accurate 3-D Numerical Modelling of Landslide Tsunami

Water ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 2033 ◽  
Author(s):  
Guodong Li ◽  
Guoding Chen ◽  
Pengfeng Li ◽  
Haixiao Jing
Keyword(s):  
Numerical Model ◽  
Mesh Generation ◽  
Water Waves ◽  
High Speed ◽  
Stokes Equations ◽  
Computational Cost ◽  
Similarity Criterion ◽  
Numerical Results ◽  
Mesh Resolution ◽  
Landslide Tsunami

High-speed and accurate simulations of landslide-generated tsunamis are of great importance for the understanding of generation and propagation of water waves and for prediction of these natural disasters. A three-dimensional numerical model, based on Reynolds-averaged Navier–Stokes equations, is developed to simulate the landslide-generated tsunami. Available experiment data is used to validate the numerical model and to investigate the scale effect of numerical model according to the Froude similarity criterion. Based on grid convergence index (GCI) analysis, fourteen cases are arranged to study the sensitivity of numerical results to mesh resolution. Results show that numerical results are more sensitive to mesh resolution in near field than that in the propagation field. Nonuniform meshes can be used to balance the computational efficiency and accuracy. A mesh generation strategy is proposed and validated, achieving an accurate prediction and nearly 22 times reduction of computational cost. Further, this strategy of mesh generation is applied to simulate the Laxiwa Reservoir landslide tsunami. The results of this study provide an important guide for the establishment of a numerical model of the real-world problem of landslide tsunami.

Computational aeroelastic analysis of slowed rotors at high advance ratios

2014 ◽  
Vol 118 (1201) ◽  
pp. 297-313 ◽  
Author(s):  
J. de Montaudouin ◽  
N. Reveles ◽  
M. J. Smith
Keyword(s):  
High Speed ◽  
Rotor Blades ◽  
Vortex Interaction ◽  
Blade Loading ◽  
Blade Vortex Interaction ◽  
Aeroelastic Analysis ◽  
Computational Fluid Dynamics Cfd ◽  
Advance Ratio ◽  
Cfd Method ◽  
Model Rotor

Abstract The aerodynamic and aeroelastic behaviour of a rotor become more complex as advance ratios increase to achieve high-speed forward fight. As the rotor blades encounter large regions of cross and reverse flows during each revolution, strong variations in the local Mach regime are encountered, inducing complex elastic blade deformations. In addition, the wake system may remain in the vicinity of the rotor, adding complexity to the blade loading. The aeroelastic behaviour of a model rotor with advance ratios ranging from 0·5 to 2·0 has been evaluated with aerodynamics provided via a computational fluid dynamics (CFD) method. Significant radial blade-vortex interaction can occur at a high advance ratio; the advance ratio at which this occurs is dependent on the rotor configuration. This condition is accompanied by high vibratory loads, peak negative torsion, and peak torsion and in-plane loads. The high vibratory loading increases the sensitivity of the trim model, so that at some high advance ratios the vibratory loads must be filtered to achieve a trimmed state.

scholarly journals Impact of Tip-Vortex Modeling Uncertainty on Helicopter Rotor Blade–Vortex Interaction Noise Prediction

2021 ◽  
Vol 66 (1) ◽  
pp. 1-13
Author(s):  
Stavros Vouros ◽  
Ioannis Goulos ◽  
Calum Scullion ◽  
Devaiah Nalianda ◽  
Vassilios Pachidis
Keyword(s):  
Vortex Core ◽  
Numerical Procedure ◽  
Tip Vortex ◽  
Analytical Models ◽  
Aerodynamic Noise ◽  
Helicopter Rotor ◽  
Vortex Interaction ◽  
Blade Vortex Interaction ◽  
Free Wake ◽  
The Impact

Free-wake models are routinely used in aeroacoustic analysis of helicopter rotors; however, their semiempiricism is accompanied with uncertainty related to the modeling of physical wake parameters. In some cases, analysts have to resort to empirical adaption of these parameters based on previous experimental evidence. This paper investigates the impact of inherent uncertainty in wake aerodynamic modeling on the robustness of helicopter rotor aeroacoustic analysis. A free-wake aeroelastic rotor model is employed to predict high-resolution unsteady airloads, including blade–vortex interactions. A rotor aeroacoustics model, based on integral solutions of the Ffowcs Williams–Hawkings equation, is utilized to calculate aerodynamic noise in the time domain. The individual analytical models are incorporated into an uncertainty analysis numerical procedure, implemented through nonintrusive Polynomial Chaos expansion. The potential sources of uncertainty in wake tip-vortex core growth modeling are identified and their impact on noise predictions is systematically quantified. When experimental data to adjust the tip-vortex core model are not available the uncertainty in acoustic pressure and noise impact at observers dominated by blade–vortex interaction noise can reach up to 25% and 3.50 dB, respectively. A set of generalized uncertainty maps is derived, for use as modeling guidelines for aeroacoustic analysis in the absence of the robust evidence necessary for calibration of semiempirical vortex core models.

Rotor blade-vortex interaction impulsive noise source localization

AIAA Journal ◽  
1990 ◽  
Vol 28 (4) ◽  
pp. 593-600 ◽  
Author(s):  
W. R. Splettstoesser ◽  
K. J. Schultz ◽  
Ruth M. Martin
Keyword(s):  
Source Localization ◽  
Rotor Blade ◽  
Noise Source ◽  
Impulsive Noise ◽  
Vortex Interaction ◽  
Blade Vortex Interaction

A Numerical Investigation of the Influence of the Blade–Vortex Interaction on the Dynamic Stall Onset

2021 ◽  
Author(s):  
Camille Castells ◽  
François Richez ◽  
Michel Costes
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
Dynamic Stall ◽  
Test Case ◽  
Vortex Interaction ◽  
Fluid Structure ◽  
Speed Test ◽  
Vortex Model ◽  
Flow Parameters ◽  
Blade Vortex Interaction

Recently, fluid–structure coupling simulations of helicopter rotors in high-thrust forward flight suggested that dynamic stall might be triggered by the blade–vortex interaction. However, no clear evidence of a correlation between dynamic stall and blade–vortex interaction has yet been given. We propose in this paper a simplified two-dimensional numerical model that can be used to indicate the role that the blade–vortex interaction plays in dynamic stall onset for different flight conditions. In this model, the rotor blade element is considered in pitching oscillation motion with a nonuniform translation, and a simplified vortex model can be introduced or not in the simulation to highlight the effect of blade–vortex interaction. All flow parameters of this simplified model are deduced from data provided by previous three-dimensional high-fidelity fluid–structure simulations. The method is used for validation and analysis of three flight conditions. The results show that, for the two cases with moderate advance ratio, the dynamic stall event is only triggered when a blade–vortex interaction occurs in the stall region. For the high-speed test case, the dynamic stall event seems to be only triggered by the very high angle of attack due to the motion of the blade.

Sign in / Sign up

Export Citation Format

Share Document