Thermal stability of CaCO3/polyethylene (PE) nanocomposites

2019 ◽  
Vol 27 (7) ◽  
pp. 371-382
Author(s):  
S Sahebian ◽  
MT Hamed Mosavian
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Thermal Stability ◽  
Morphological Structure ◽  
Thermomechanical Analysis ◽  
Scanning Calorimetry ◽  
Weight Percentage ◽  
Transmission Electron ◽  
Crystallization Experiments ◽  
Thermal Stability Of

Calcium carbonate (CaCO3) nanoparticles in polymer matrix cause to improvement in polymer performance, including thermal stability and mechanical properties. The main goal of this article is to investigate the effect of different weight percentage of nanoparticles of CaCO3 on thermal stability and mechanical properties of polyethylene (PE) nanocomposites. The morphological structure of CaCO3 nanoparticles and nanocomposites was investigated by transmission electron microscopy and scanning electron microscopy. The thermal stability of PE and its nanocomposites was also determined by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and thermomechanical analysis. Nonisothermal crystallization experiments by DSC test showed that the incorporation of nanoparticles increased the crystallinity, glass transition temperature, and the effective energy barrier for crystallization process. Besides, degradation behavior was evaluated by TGA. The onset mass loss temperature shifted to higher value in the presence of nanoparticles.

The Influence of the ECAP Temperature on Microstructure and Mechanical Properties of a Magnesium Alloy

2006 ◽  
Vol 503-504 ◽  
pp. 609-614 ◽  
Author(s):  
Olya B. Kulyasova ◽  
Rinat K. Islamgaliev ◽  
Nikolay A. Krasilnikov
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Thermal Stability ◽  
Transmission Electron Microscopy ◽  
Magnesium Alloy ◽  
Volume Fraction ◽  
Angular Pressing ◽  
Transmission Electron ◽  
Significant Difference ◽  
Thermal Stability Of

The influence of the equal channel angular pressing (ECAP) temperature (150-350oC) on microstructure of the AM60 magnesium alloy has been investigated using transmission electron microscopy. It was demonstrated that application of various ECAP regimes leads to significant difference in a grain size and volume fraction of precipitates in investigated material. Thermal stability of precipitates and correlation between microstructure and tensile strength are discussed.

scholarly journals Study of the Effects of the Structure of Phthalazinone’s Side-Group on the Properties of the Poly(phthalazinone ether ketone)s Resins

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 803 ◽  
Author(s):  
Feng Bao ◽  
Fengfeng Zhang ◽  
Chenghao Wang ◽  
Yuanyuan Song ◽  
Nan Li ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermomechanical Analysis ◽  
Nucleophilic Aromatic Substitution ◽  
Differential Scanning Calorimetry Analysis ◽  
Side Group ◽  
Aromatic Substitution ◽  
Scanning Calorimetry ◽  
Ether Ketone ◽  
Thermal Stability Of

The application of poly(phthalazinone ether ketone)s (PPEKs) resin containing phthalazinone moiety is limited, due to its poor thermoforming processability. To investigate the effects of the phthalazinone’s side-group on the thermal stability and processability of the resin, a series of PPEKs resins with different side-group (–H/–CH3/–Ph) were prepared by nucleophilic aromatic substitution polymerization. The properties of the obtained resins were investigated by differential scanning calorimetry analysis (DSC), thermogravimetric analysis (TGA), dynamic thermomechanical analysis (DMA), and rheogoniometer. The results show that the introduction of methyl or phenyl into the PPEKs resin, significantly reduced the melting viscosity of the resin, but resulted in a slight decrease in the thermal stability of it. This might be due to the presence of methyl or phenyl, which enhanced the free volume of the molecule and reduced the entanglement between the chains; the results of the computer simulation confirmed it. Moreover, the resin films displayed excellent tensile strength with the introduction of methyl or phenyl. In a word, a novel poly(phthalazinone ether ketone)s resin with thermal resistance, easy processing and excellent mechanical properties could be obtained by introducing appropriate bulk-rigid side-groups into the phthalazinone moiety.

Mechanical Properties and Microstructure Evolution of Typical Over-Aging State Al-Zn-Mg-Cu Alloy during Thermal Exposure

2021 ◽  
Vol 1026 ◽  
pp. 84-92
Author(s):  
Tao Qian Cheng ◽  
Zhi Hui Li
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Mechanical Property ◽  
Electrical Conductivity ◽  
Transmission Electron Microscopy ◽  
Tensile Strength ◽  
Thermal Exposure ◽  
Cu Alloy ◽  
Transmission Electron ◽  
Thermal Stability Of

Al-Zn-Mg-Cu alloy have been widely used in aerospace industry. However, there is still a lack of research on thermal stability of Al-Zn-Mg-Cu alloy products. In the present work, an Al-Zn-Mg-Cu alloy with T79 and T74 states was placed in the corresponding environment for thermal exposure experiments. Performance was measured by tensile strength, hardness and electrical conductivity. In this paper, precipitation observation was analyzed by transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HREM). The precipitations of T79 state alloy were GPⅡ zone, η' phase and η phase while the ultimate tensile strength, hardness and electrical conductivity were 571MPa, 188.2HV and 22.2MS×m-1, respectively. The mechanical property of T79 state alloy decreased to 530MPa and 168.5HV after thermal exposure. The diameter of precipitate increased and the precipitations become η' and η phase at the same time. During the entire thermal exposure, T74 state alloy had the same mechanical property trend as T79 state alloy. The precipitate diameter also increased while the types of precipitate did not change under thermal exposure. The size of precipitates affected the choice of dislocation passing through the particles to affect the mechanical properties.

scholarly journals Polystyrene/Montmorillonite Nanocomposites: Study of the Morphology and Effects of Sonication Time on Thermal Stability

2013 ◽  
Vol 2013 ◽  
pp. 1-12 ◽  
Author(s):  
Mashael Alshabanat ◽  
Amal Al-Arrash ◽  
Waffa Mekhamer
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Solution Method ◽  
Sonication Time ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Polystyrene Matrix ◽  
Before And After ◽  
Silicate Layers ◽  
Thermal Stability Of

Polymer nanocomposites of polystyrene matrix containing 10% wt of organo-montmorillonite (organo-MMT) were prepared using the solution method with sonication times of 0.5, 1, 1.5, and 2 hours. Cetyltrimethylammonium bromide (CTAB) is used to modify the montmorillonite clay after saturating its surface with Na+ions. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to characterize the montmorillonite before and after modification by CTAB. The prepared nanocomposites were characterized using the same analysis methods. These results confirm the intercalation of PS in the interlamellar spaces of organo-MMT with a very small quantity of exfoliation of the silicate layers within the PS matrix of all samples at all studied times of sonication. The thermal stability of the nanocomposites was measured using thermogravimetric analysis (TGA). The results show clear improvement, and the effects of sonication time are noted.

Sign in / Sign up

Export Citation Format

Share Document