Multiphysics circuit of a magnetostrictive energy harvesting device

2017 ◽  
Vol 28 (17) ◽  
pp. 2317-2330 ◽  
Author(s):  
Carmine S Clemente ◽  
Abdelmomen Mahgoub ◽  
Daniele Davino ◽  
Ciro Visone
Keyword(s):  
Energy Harvesting ◽  
Equivalent Circuit ◽  
Permanent Magnets ◽  
Nonlinear Functions ◽  
Circuit Simulator ◽  
The Subject ◽  
Full Coupling ◽  
Resistive Loads ◽  
Energy Harvesting Devices ◽  
Physical Quantities

Kinetic energy harvesting devices based on magnetostrictive materials are composed of several parts, for dealing with multiphysics, including mechanical, magnetic, and electric quantities. An effective method to simulate the effects of different working conditions is important to fully exploit such devices. The aim of this paper is to present an equivalent circuit that can be identified with standard measurements on the device and simulated with a standard circuit simulator, such as Spice. The circuit is a nonlinear three-port circuit, related to the mechanical, magnetic, and electrical parts of the device. Unlike many of the published papers on the subject, the magneto-mechanical modeling is quite realistic and exploits nonlinear functions and the full coupling among the involved physical quantities of the employed magnetostrictive material. The nonlinear equivalent circuit is preliminarily validated on a concept device with permanent magnets biasing on a Stress Annealed Galfenol rod. Experimental data with different resistive loads and magnetic biasing are considered and compared with simulation outputs, in terms of the RMS voltage and harvested power.

scholarly journals A Study on the Energy-Harvesting Device with a Magnetic Spring for Improved Durability in High-Speed Trains

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 830
Author(s):  
Jaehoon Kim
Keyword(s):  
Energy Harvesting ◽  
High Speed ◽  
Permanent Magnets ◽  
Critical Issue ◽  
Sensor Nodes ◽  
High Speed Train ◽  
Vibration Energy Harvesting ◽  
Magnetic Spring ◽  
High Speed Trains ◽  
Energy Harvesting Devices

Durability is a critical issue concerning energy-harvesting devices. Despite the energy-harvesting device’s excellent performance, moving components, such as the metal spring, can be damaged during operation. To solve the durability problem of the metal spring in a vibration-energy-harvesting (VEH) device, this study applied a non-contact magnetic spring to a VEH device using the repulsive force of permanent magnets. A laboratory experiment was conducted to determine the potential energy-harvesting power using the magnetic spring VEH device. In addition, the characteristics of the generated power were studied using the magnetic spring VEH device in a high-speed train traveling at 300 km/h. Through the high-speed train experiment, the power generated by both the metal spring VEH device and magnetic spring VEH device was measured, and the performance characteristics required for a power source for wireless sensor nodes in high-speed trains are discussed.

Investigations of a Stiffness Tunable Nonlinear Vibrational Energy Harvester

2014 ◽  
Vol 14 (08) ◽  
pp. 1440023 ◽  
Author(s):  
Dongxu Su ◽  
Kimihiko Nakano ◽  
Rencheng Zheng ◽  
Matthew P. Cartmell
Keyword(s):  
Energy Harvesting ◽  
Permanent Magnets ◽  
Energy Harvester ◽  
Vibrational Energy ◽  
Duffing Oscillator ◽  
Experimental Tests ◽  
High Energy ◽  
Practical Implementation ◽  
Energy Harvesting Devices ◽  
Energy Orbit

The recent potential benefit of nonlinearity has been applying in order to improve the effectiveness of energy harvesting devices. For instance, at relatively high excitation levels, both low and high-energy responses can coexist for the same parameter combinations in a hardening type Duffing oscillator, and this provides a wider bandwidth and a higher energy harvesting effectiveness under periodic excitations. However, frequency or amplitude sweeps of the excitation must be used in order to reach a desirable high-energy orbit, and this gives a limitation on practical implementation. This paper presents a stiffness tunable nonlinear vibrational energy harvester which contains a moving magnetic end mass attached to a cantilever beam, whose nonlinearity emerges from the interaction forces with two neighboring permanent magnets facing with opposing poles. The motivating hypothesis has been that the jump from the low-energy orbit to the high-energy orbit can be triggered by tuning the stiffness of the system without changing the frequency or the amplitude of the excitation. Theoretical investigations show a methodology for tuning stiffness, and experimental tests have validated that the proposed method can be used to trigger a jump to the desirable state, and hereby this can broaden the bandwidth of the energy harvester.

scholarly journals Modeling and Characterization of a Kinetic Energy Harvesting Device Based on Galfenol

Materials ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3199 ◽  
Author(s):  
Carmine Stefano Clemente ◽  
Daniele Davino
Keyword(s):  
Energy Harvesting ◽  
Permanent Magnets ◽  
Electronic Devices ◽  
Power Electronic ◽  
Electrical Load ◽  
Circuit Simulator ◽  
Force Profile ◽  
Conversion Performance ◽  
Electrical Connections

The proposal of Energy Harvesting (EH) techniques and devices has experienced a significant growth over the last years, because of the spread of low power electronic devices. Small ambient energy quantities can be recovered through EH and exploited to power Wireless Sensor Networks (WSN) used, for example, for the Structural Health Monitoring (SHM) of bridges or viaducts. For this purpose, research on EH devices based on magnetostrictive materials has significantly grown in the last years. However, these devices comprise different parts, such as a mechanical system, magnetic circuit and electrical connections, which are coupled together. Then, a method able to reproduce the performance may be a handy tool. This paper presents a nonlinear equivalent circuit of a harvester, based on multiple rods of Galfenol, which can be solved with standard circuit simulator. The circuital parameters are identified with measurements both on one rod and on the whole device. The validation of the circuit and the analysis of the power conversion performance of the device have been conducted with different working conditions (force profile, typology of permanent magnets, resistive electrical load).

Vibrational Energy Harvesting Devices

2010 ◽  
Vol 2 (2) ◽  
pp. 80-92
Author(s):  
Rupesh Patel ◽  
Atanas A. Popov ◽  
Stewart McWilliam
Keyword(s):  
Energy Harvesting ◽  
Vibrational Energy ◽  
Energy Harvesting Devices ◽  
Vibrational Energy Harvesting

scholarly journals Piezoelectric property comparison of two-dimensional ZnO nanostructures for energy harvesting devices

RSC Advances ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 3363-3370
Author(s):  
Ang Yang ◽  
Yu Qiu ◽  
Dechao Yang ◽  
Kehong Lin ◽  
Shiying Guo
Keyword(s):  
Energy Harvesting ◽  
Piezoelectric Property ◽  
Piezoelectric Effect ◽  
Theoretical Studies ◽  
Two Dimensional ◽  
Zno Nanostructures ◽  
Energy Harvesting Devices ◽  
Experimental And Theoretical Studies

In this paper, experimental and theoretical studies of the piezoelectric effect of two-dimensional ZnO nanostructures, including straight nanosheets (SNSs) and curved nanosheets (CNSs) are conducted.

scholarly journals Enhanced Power Extraction with Sediment Microbial Fuel Cells by Anode Alternation

Fuels ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 168-178
Author(s):  
Marzia Quaglio ◽  
Daniyal Ahmed ◽  
Giulia Massaglia ◽  
Adriano Sacco ◽  
Valentina Margaria ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Energy Harvesting ◽  
Power Density ◽  
Microbial Fuel Cells ◽  
Average Power ◽  
Power Extraction ◽  
Harvesting Technique ◽  
Harvesting Method ◽  
Energy Harvesting Devices ◽  
Efficient Power

Sediment microbial fuel cells (SMFCs) are energy harvesting devices where the anode is buried inside marine sediment, while the cathode stays in an aerobic environment on the surface of the water. To apply this SCMFC as a power source, it is crucial to have an efficient power management system, leading to development of an effective energy harvesting technique suitable for such biological devices. In this work, we demonstrate an effective method to improve power extraction with SMFCs based on anodes alternation. We have altered the setup of a traditional SMFC to include two anodes working with the same cathode. This setup is compared with a traditional setup (control) and a setup that undergoes intermittent energy harvesting, establishing the improvement of energy collection using the anodes alternation technique. Control SMFC produced an average power density of 6.3 mW/m2 and SMFC operating intermittently produced 8.1 mW/m2. On the other hand, SMFC operating using the anodes alternation technique produced an average power density of 23.5 mW/m2. These results indicate the utility of the proposed anodes alternation method over both the control and intermittent energy harvesting techniques. The Anode Alternation can also be viewed as an advancement of the intermittent energy harvesting method.

scholarly journals Dynamical structure of highly eccentric discs with applications to tidal disruption events

2020 ◽  
Vol 500 (3) ◽  
pp. 4110-4125
Author(s):  
Elliot M Lynch ◽  
Gordon I Ogilvie
Keyword(s):  
Thermal Instability ◽  
Vertical Structure ◽  
Scale Height ◽  
Accretion Discs ◽  
Radiative Cooling ◽  
Dynamical Structure ◽  
Tidal Disruption ◽  
The Subject ◽  
Stable Solutions ◽  
Physical Quantities

ABSTRACT Whether tidal disruption events circularize or accrete directly as highly eccentric discs is the subject of current research and appears to depend sensitively on the disc thermodynamics. One aspect of this problem that has not received much attention is that a highly eccentric disc must have a strong, non-hydrostatic variation of the disc scale height around each orbit. As a complement to numerical simulations carried out by other groups, we investigate the dynamical structure of TDE discs using the non-linear theory of eccentric accretion discs. In particular, we study the variation of physical quantities around each elliptical orbit, taking into account the dynamical vertical structure, as well as viscous dissipation and radiative cooling. The solutions include a structure similar to the nozzle-like structure seen in simulations. We find evidence for the existence of the thermal instability in highly eccentric discs dominated by radiation pressure. For thermally stable solutions many of our models indicate a failure of the α-prescription for turbulent stresses. We discuss the consequences of our results for the structure of eccentric TDE discs.

Sign in / Sign up

Export Citation Format

Share Document