Bayesian inference and uncertainty propagation using efficient fractional-order viscoelastic models for dielectric elastomers

Author(s):  
Paul R Miles ◽  
Graham T Pash ◽  
Ralph C Smith ◽  
William S Oates

Dielectric elastomers are employed for a wide variety of adaptive structures. Many of these soft elastomers exhibit significant rate-dependencies in their response. Accurately quantifying this viscoelastic behavior is non-trivial and in many cases a nonlinear modeling framework is required. Fractional-order operators have been applied to modeling viscoelastic behavior for many years, and recent research has shown fractional-order methods to be effective for nonlinear frameworks. This implementation can become computationally expensive to achieve an accurate approximation of the fractional-order derivative. Accurate estimation of the elastomer’s viscoelastic behavior to quantify parameter uncertainty motivates the use of Markov Chain Monte Carlo (MCMC) methods. Since MCMC is a sampling based method, requiring many model evaluations, efficient estimation of the fractional derivative operator is crucial. In this paper, we demonstrate the effectiveness of using quadrature techniques to approximate the Riemann–Liouville definition for fractional derivatives in the context of estimating the uncertainty of a nonlinear viscoelastic model. We also demonstrate the use of parameter subset selection techniques to isolate parameters that are identifiable in the sense that they are uniquely determined by measured data. For those identifiable parameters, we employ Bayesian inference to compute posterior distributions for parameters. Finally, we propagate parameter uncertainties through the models to compute prediction intervals for quantities of interest.

Author(s):  
Paul Miles ◽  
Graham Pash ◽  
William Oates ◽  
Ralph C. Smith

Dielectric elastomers are employed on a wide variety of adaptive structures. Many of these soft elastomers exhibit significant rate-dependencies in their response. Accurately quantifying this viscoelastic behavior is non-trivial and in many instances a nonlinear modeling framework is required. Fractional-order operators have been applied to modeling viscoelastic behavior for many years, and recent research has shown fractional-order methods to be effective for nonlinear frameworks. This implementation can become computationally expensive to achieve an accurate approximation of the fractional-order derivative. In this paper, we demonstrate the effectiveness of using quadrature techniques in approximating the Riemann-Liouville definition for fractional derivatives in the context of developing a nonlinear viscoelastic model.


2015 ◽  
Vol 82 (9) ◽  
Author(s):  
Jingkai Guo ◽  
Rui Xiao ◽  
Harold S. Park ◽  
Thao D. Nguyen

In this paper, we investigated the temperature-dependent viscoelastic behavior of dielectric elastomers (DEs) and the effects of viscoelasticity on the electro-actuation behavior. We performed dynamic thermomechanical analysis to measure the master curve of the stress relaxation function and the temperature dependence of the relaxation time of VHB 4905, a commonly used DE. The master curve was applied to calculate the viscoelastic spectrum for a discrete multiprocess finite deformation viscoelastic model. In addition, we performed uniaxial creep and stress relaxation experiments and electrical actuation experiments under different prestretch conditions. The measured spectrum was applied to predict the experimental results. Generally, the model produced good quantitative agreement with both the viscoelastic and electro-actuation experiments, which shows the necessity of using a multiprocess relaxation model to accurately capture the viscoelastic response for VHB. However, the model underpredicted the electro-actuated creep strain for high voltages near the pull-in instability. We attributed the discrepancies to the complex boundary conditions that were not taken into account in the simulation. We also investigated the failure of VHB membrane caused by viscoelastic creep when prestretched and subjected to constant voltage loading. The experimental time to failure for the specimens decreased exponentially with voltage, which agreed well with the predictions of the model.


2018 ◽  
Vol 10 (09) ◽  
pp. 1850099 ◽  
Author(s):  
Hesam Khajehsaeid

Elastomers or rubber-like materials exhibit nonlinear viscoelastic behavior such as creep and relaxation upon mechanical loading. Differential constitutive models and hereditary integrals are the main frameworks followed in the literature for modeling the viscoelastic behavior at finite deformations. Regular differential operators can be replaced by fractional-order derivatives in the standard models in order to make fractional viscoelastic models. In the present paper, the relaxation behavior of elastomers is formulated both in terms of ordinary (integer-order) and fractional differential viscoelastic models. The derived constitutive equations are fitted to several experimental data to compare their efficiency in modeling the stress relaxation phenomenon. Specifically, a fractional viscoelastic model with one fractional dashpot (FD) is compared with two ordinary models including respectively one and two ordinary dashpots (OD). The models are compared in fitting accuracy, number of required material parameters and also variation of parameters from one compound to another to clarify the effects of filler content and deformation rate. It is shown that, the results of the ordinary model with one OD is not good at all. The fractional model with one FD and the ordinary model with two ODs provide good fittings for all compounds whereas the former uses only three parameters and the latter uses five material parameters. For the fractional model, the order of the Maxwell element and the associated relaxation time approximately remain the same for different compounds of each material at certain loading rates, but it is not the case for the ordinary differential models.


Author(s):  
Yousof Azizi ◽  
Patricia Davies ◽  
Anil K. Bajaj

Flexible polyethylene foam is used in many engineering applications. It exhibits nonlinear and viscoelastic behavior which makes it difficult to model. To date, several models have been developed to characterize the complex behavior of foams. These attempts include the computationally intensive microstructural models to continuum models that capture the macroscale behavior of the foam materials. In this research, a nonlinear viscoelastic model, which is an extension to previously developed models, is proposed and its ability to capture foam response in uniaxial compression is investigated. It is hypothesized that total stress can be decomposed into the sum of a nonlinear elastic component, modeled by a higher-order polynomial, and a nonlinear hereditary type viscoelastic component. System identification procedures were developed to estimate the model parameters using uniaxial cyclic compression data from experiments conducted at six different rates. The estimated model parameters for individual tests were used to develop a model with parameters that are a function of strain rates. The parameter estimation technique was modified to also develop a comprehensive model which captures the uniaxial behavior of all six tests. The performance of this model was compared to that of other nonlinear viscoelastic models.


2018 ◽  
Vol 10 (12) ◽  
pp. 168781401881745 ◽  
Author(s):  
Ying Zhang ◽  
Zhanghua Lian ◽  
Mi Zhou ◽  
Tiejun Lin

At the high or extra-high temperatures in a natural gas oilfield, where the premium connection is employed by casing, gas leakage in the wellbore is always detected after several years of gas production. As the viscoelastic material’s mechanical properties change with time and temperature, the relaxation of the contact pressure on the connection sealing surface is the main reason for the gas leakage in the high-temperature gas well. In this article, tension-creep experiments were conducted. Furthermore, a constitutive model of the casing material was established by the Prony series method. Moreover, the Prony series’ shift factor was calculated to study the thermo-rheological behavior of the casing material ranging from 120°C to 300°C. A linear viscoelastic model was implemented in ABAQUS, and the simulation results are compared to our experimental data to validate the methodology. Finally, the viscoelastic finite element model is applied to predict the relaxation of contact pressure on the premium connections’ sealing surface versus time under different temperatures. And, the ratio of the design contact pressure and the intending gas sealing pressure is recommended for avoiding the premium connections failure in the high-temperature gas well.


Author(s):  
Toshiaki Jo ◽  
Hiroki Yamanaka

Environmental DNA (eDNA) analysis is a promising tool for non-disruptive and cost-efficient estimation of species abundance. However, its practical applicability in natural environments is limited because it is unclear whether eDNA concentrations actually represent species abundance in the field. Although the importance of accounting for eDNA dynamics, such as transport and degradation, has been discussed, the influences of eDNA characteristics, including production source and state, and methodology, including collection and quantification strategy and abundance metrics, on the accuracy of eDNA-based abundance estimation were entirely overlooked. We conducted a meta-analysis using 56 previous eDNA literature and investigated the relationships between the accuracy (R2) of eDNA-based abundance estimation and eDNA characteristics and methodology. Our meta-regression analysis found that R2 values were significantly lower for crustaceans than fish, suggesting that less frequent eDNA production owing to their external morphology and physiology may impede accurate estimation of their abundance via eDNA. Moreover, R2 values were positively associated with filter pore size, indicating that selective collection of larger-sized eDNA, which is typically fresher, could improve the estimation accuracy of species abundance. Furthermore, R2 values were significantly lower for natural than laboratory conditions, while there was no difference in the estimation accuracy among natural environments. Our findings shed a new light on the importance of what characteristics of eDNA should be targeted for more accurate estimation of species abundance. Further empirical studies are required to validate our findings and fully elucidate the relationship between eDNA characteristics and eDNA-based abundance estimation.


Author(s):  
Ke-Cai Cao ◽  
YangQuan Chen ◽  
Dan Stuart

Tragedies due to people’s crushing or trampling have been observed in recent years. In order to understand the reasons that lead to these accidents, a lot of research has been conducted in modeling or predicting the behavior of crowd pedestrians. A new kind of fractional order dynamic description for crowd-pedestrian system has been developed in microscopic scale in this paper for a better understanding of human collective behavior where fractional order in time domain has been introduced. Due to the freedom provided by Fractional Calculus, a lot of characters of pedestrians can be considered in this fractional order modeling framework, such as memory effects, long range interactions and heterogeneity of each individual. Simulations results using Matlab in microscopic are also presented to show the effects of integer order and fractional order on evacuation time which is useful in evaluating the evacuation process or predicting crowd stampede that is going to occur.


Author(s):  
Eugenia Stanisauskis ◽  
Paul Miles ◽  
William Oates

Auxetic foams exhibit novel mechanical properties due to their unique microstructure for improved energy-absorption and cavity expansion applications that have fascinated the scientific community since their inception. Given the advancements in material processing and performance of polymer open cell auxetic foams, there is a strong desire to fully understand the nonlinear rate-dependent deformation of these materials. The influence of nonlinear compressibility is introduced here along with relaxation effects to improve model predictions for different stretch rates and finite deformation regimes. The viscoelastic behavior of the material is analyzed by comparing fractional order and integer order calculus models. All results are statistically validated using maximum entropy methods to obtain Bayesian posterior densities for the hyperelastic, auxetic, and viscoelastic parameters. It is shown that fractional order viscoelasticity provides [Formula: see text]–[Formula: see text] improvement in prediction over integer order viscoelastic models when the model is calibrated at higher stretch rates where viscoelasticity is more significant.


2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
S. Y. Park ◽  
C. Li ◽  
S. M. Mendoza Benavides ◽  
E. van Heugten ◽  
A. M. Staicu

We propose a novel modeling framework to study the effect of covariates of various types on the conditional distribution of the response. The methodology accommodates flexible model structure, allows for joint estimation of the quantiles at all levels, and provides a computationally efficient estimation algorithm. Extensive numerical investigation confirms good performance of the proposed method. The methodology is motivated by and applied to a lactating sow study, where the primary interest is to understand how the dynamic change of minute-by-minute temperature in the farrowing rooms within a day (functional covariate) is associated with low quantiles of feed intake of lactating sows, while accounting for other sow-specific information (vector covariate).


Sign in / Sign up

Export Citation Format

Share Document