scholarly journals Impacts of average illuminance, spectral distribution, and uniformity on brightness and safety perceptions under parking lot lighting

2019 ◽  
Vol 52 (5) ◽  
pp. 626-640 ◽  
Author(s):  
JD Bullough ◽  
JD Snyder ◽  
K Kiefer
Keyword(s):  
Spectral Distribution ◽  
Energy Use ◽  
Light Emitting Diode ◽  
Light Level ◽  
Scale Model ◽  
Light Emitting ◽  
Safety Perceptions ◽  
Balancing Energy ◽  
Parking Lot ◽  
Lighting Systems

In addition to supporting visibility, parking lot lighting should enable people to feel safe and secure while they are walking through a parking lot at night. Previously published research has indicated that perceptions of safety and security under outdoor illumination are correlated with perceptions of scene brightness, which in turn are influenced by the light level in the lot, by the spectral distribution of the illumination, and the uniformity of illumination. However, the interactions and interplay among these factors are not well understood. To address this knowledge gap, two laboratory experiments were conducted using a scale model parking lot scene and a controllable light-emitting diode (LED) lighting system that allowed parametric variations in light level, spectrum and uniformity. From the results, a mathematical model of overall brightness and safety perceptions was developed to predict how different lighting configurations are perceived. The model can be used to help specifiers select lighting systems for parking lot illumination that meet the objectives of reinforcing sensations of personal safety while balancing energy use and cost concerns.

Human Factors Impacts of Light-Emitting Diode Airfield Lighting

2017 ◽  
Vol 2626 (1) ◽  
pp. 51-57 ◽  
Author(s):  
John D. Bullough
Keyword(s):  
Human Factors ◽  
Experimental Evidence ◽  
Energy Use ◽  
Light Emitting Diode ◽  
Light Sources ◽  
Light Emitting ◽  
Incandescent Light ◽  
Color Identification ◽  
Lighting Systems ◽  
Maintenance Requirements

Light-emitting diodes (LEDs) differ from incandescent light sources in several ways that are relevant to energy and maintenance requirements of airfield lighting systems. They have higher luminous efficacy and, when designed properly, have longer useful operating lives; both factors make LEDs attractive candidates for airfield lighting. The photometric, colorimetric, and temporal characteristics of LEDs also differ from those of incandescent light sources, and these can have important implications for the appearance of runway and taxiway lighting systems. The present paper reviews publications summarizing experimental and analytical investigations designed to assess these implications with respect to the following human factors impacts: color identification, brightness and glare, visibility in fog and haze, response to onset of flashing lights, and stroboscopic effects such as the phantom array. Overall, this review of experimental evidence suggests that, in addition to their reduced energy use and maintenance requirements, LED airfield lighting can be advantageous in comparison with incandescent lighting systems used to delineate airport runways and taxiways.

scholarly journals Revision of Smart Street Lighting LED

2019 ◽  
Vol 15 (28) ◽  
Author(s):  
Diego Julián Rodríguez Patarroyo ◽  
Iván Felipe Cely Garzón ◽  
Cristhian Alexander Letrado Forero
Keyword(s):  
Energy Efficiency ◽  
Energy Use ◽  
Light Emitting Diode ◽  
Lighting System ◽  
Street Lighting ◽  
Light Emitting ◽  
The World ◽  
Current Context ◽  
Lighting Systems ◽  
And Performance

Introduction: This Literature Review article is the result of a research on the current situation of smart public lighting systems with light-emitting diode (LED) technology in cities around the world. Problem: How convenient is it to use smart public lighting system with LED luminaires? Objective: To review the context of smart public lighting with LED technology. Methodology: Within this project, a lit review was conducted with more than 50 academic articles found in different databases such as: IEEE Xplore, Scopus, ScienceDirect etc. The selection criteria of the information followed the revision of articles from 2006 to 2018, and also, took into account their installation and performance in different cities and places of the world. Furthermore, articles on polluting and inefficient technologies were excluded. Conclusion: Considering the current context in which LED smart public lighting is, it is more likely to be implemented in the future. Results: Smart LED street lighting systems are more efficient in energy use, leads to savings in costs in medium terms, and finally, present a lower environmental impact compared to conventional lighting systems. Limitations: The review focuses on energy efficiency and economic aspects, not on social aspects. Originality: Smart LED public lighting systems have been researched within the economic and energy efficiency context.

scholarly journals A Supervisory Control Strategy for Improving Energy Efficiency of Artificial Lighting Systems in Greenhouses

Energies ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 202
Author(s):  
Gianluca Serale ◽  
Luca Gnoli ◽  
Emanuele Giraudo ◽  
Enrico Fabrizio
Keyword(s):  
Control Strategy ◽  
Light Emitting Diode ◽  
Cost Savings ◽  
Energy Performance ◽  
Lighting System ◽  
Light Emitting ◽  
Artificial Lighting ◽  
Lighting Control ◽  
Lighting Systems ◽  
Power Densities

Artificial lighting systems are used in commercial greenhouses to ensure year-round yields. Current Light Emitting Diode (LED) technologies improved the system efficiency. Nevertheless, having artificial lighting systems extended for hectares with power densities over 50W/m2 causes energy and power demand of greenhouses to be really significant. The present paper introduces an innovative supervisory and predictive control strategy to optimize the energy performance of the artificial lights of greenhouses. The controller has been implemented in a multi-span plastic greenhouse located in North Italy. The proposed control strategy has been tested on a greenhouse of 1 hectare with a lighting system with a nominal power density of 50 Wm−2 requiring an overall power supply of 1 MW for a period of 80 days. The results have been compared with the data coming from another greenhouse of 1 hectare in the same conditions implementing a state-of-the-art strategy for artificial lighting control. Results outlines that potential 19.4% cost savings are achievable. Moreover, the algorithm can be used to transform the greenhouse in a viable source of energy flexibility for grid reliability.

scholarly journals Light Emitting Diodes (LEDs) as Agricultural Lighting: Impact and Its Potential on Improving Physiology, Flowering, and Secondary Metabolites of Crops

2021 ◽  
Vol 13 (4) ◽  
pp. 1985
Author(s):  
Musa Al Murad ◽  
Kaukab Razi ◽  
Byoung Ryong Jeong ◽  
Prakash Muthu Arjuna Samy ◽  
Sowbiya Muneer
Keyword(s):  
Crop Production ◽  
Morphological Changes ◽  
Light Emitting Diode ◽  
Crop Productivity ◽  
Photon Flux ◽  
Flower Initiation ◽  
Nutrient Metabolism ◽  
Light Emitting ◽  
Cultivation Systems ◽  
Lighting Systems

A reduction in crop productivity in cultivable land and challenging environmental factors have directed advancement in indoor cultivation systems, such that the yield parameters are higher in outdoor cultivation systems. In wake of this situation, light emitting diode (LED) lighting has proved to be promising in the field of agricultural lighting. Properties such as energy efficiency, long lifetime, photon flux efficacy and flexibility in application make LEDs better suited for future agricultural lighting systems over traditional lighting systems. Different LED spectrums have varied effects on the morphogenesis and photosynthetic responses in plants. LEDs have a profound effect on plant growth and development and also control key physiological processes such as phototropism, the immigration of chloroplasts, day/night period control and the opening/closing of stomata. Moreover, the synthesis of bioactive compounds and antioxidants on exposure to LED spectrum also provides information on the possible regulation of antioxidative defense genes to protect the cells from oxidative damage. Similarly, LEDs are also seen to escalate the nutrient metabolism in plants and flower initiation, thus improving the quality of the crops as well. However, the complete management of the irradiance and wavelength is the key to maximize the economic efficacy of crop production, quality, and the nutrition potential of plants grown in controlled environments. This review aims to summarize the various advancements made in the area of LED technology in agriculture, focusing on key processes such as morphological changes, photosynthetic activity, nutrient metabolism, antioxidant capacity and flowering in plants. Emphasis is also made on the variation in activities of different LED spectra between different plant species. In addition, research gaps and future perspectives are also discussed of this emerging multidisciplinary field of research and its development.

scholarly journals Increased Plant Quality, Greenhouse Productivity and Energy Efficiency with Broad-Spectrum LED Systems: A Case Study for Thyme (Thymus vulgaris L.)

Plants ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 960
Author(s):  
Jenny Manuela Tabbert ◽  
Hartwig Schulz ◽  
Andrea Krähmer
Keyword(s):  
Broad Spectrum ◽  
Energy Savings ◽  
Light Emitting Diode ◽  
Thymus Vulgaris ◽  
Light Spectrum ◽  
Light Emitting ◽  
Biomass Yields ◽  
Lighting Systems

A light-emitting diode (LED) system covering plant-receptive wavebands from ultraviolet to far-red radiation (360 to 760 nm, “white” light spectrum) was investigated for greenhouse productions of Thymus vulgaris L. Biomass yields and amounts of terpenoids were examined, and the lights’ productivity and electrical efficiency were determined. All results were compared to two conventionally used light fixture types (high-pressure sodium lamps (HPS) and fluorescent lights (FL)) under naturally low irradiation conditions during fall and winter in Berlin, Germany. Under LED, development of Thymus vulgaris L. was highly accelerated resulting in distinct fresh yield increases per square meter by 43% and 82.4% compared to HPS and FL, respectively. Dry yields per square meter also increased by 43.1% and 88.6% under LED compared to the HPS and FL lighting systems. While composition of terpenoids remained unaffected, their quantity per gram of leaf dry matter significantly increased under LED and HPS as compared to FL. Further, the power consumption calculations revealed energy savings of 31.3% and 20.1% for LED and FL, respectively, compared to HPS. In conclusion, the implementation of a broad-spectrum LED system has tremendous potential for increasing quantity and quality of Thymus vulgaris L. during naturally insufficient light conditions while significantly reducing energy consumption.

Energy Saving Potential of Dynamic Lighting Control in Street Lighting Systems in Libya

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Salah M Alabani
Keyword(s):  
Total Energy ◽  
Energy Saving ◽  
Light Emitting Diode ◽  
Street Lighting ◽  
Light Emitting ◽  
Energy Saving Potential ◽  
Road Section ◽  
First Case ◽  
Lighting Systems ◽  
Dynamic Lighting

This paper studies the manner of energy consumption in Libyan street lighting systems and general road section. It also suggests proposal system with two cases of operation for an attempt to apply the energy saving program by adopting an optimum method in order to decrease the demand of energy in this section and to reduce the use of uneconomic equipment.The proposal system in this paper introduces the Light Emitting Diode (LED) street lighting technology to be used instead of traditional luminaries High Pressure Sodium (HPS). The proposed system is divided into two cases. The first case discusses the replacement of traditional luminaries (HPS) with energy saving luminaries (LED), while second case explains how integrating control node (dynamic dimmer) into LED in order to dim output lighting in streets will save more energy.This study reaches a result that a significant amount of energy of %47 (about 1092.23 GWh/year) of total energy consumed in street lighting sector could be saved if first case is applied. Moreover, it suggests that more energy of %58 (about 1380.02 GWh/year) of total energy consumed in the same sector cloud be saved if the second case is adopted.

Design, Measurements and Characterization of Smart Electronic Board for PV Streetlight based on LED and High Intensity Discharge Lamps

2013 ◽  
pp. 153-165
Author(s):  
Paolo Visconti ◽  
Daniele Romanello ◽  
Giovanni Zizzari ◽  
Vito Ventura ◽  
Giorgio Cavalera
Keyword(s):  
Rural Areas ◽  
High Intensity ◽  
Light Emitting Diode ◽  
Light Emitting ◽  
Electronic Board ◽  
Lighting Systems ◽  
And Control ◽  
Near Future ◽  
Hid Lamps

This work presents an electronic board for driving and control of High Intensity Discharge (HID) lamps and Light Emitting Diode (LED) lamps. The proposed electronic board is able to drive HID or LED lamps by means of a reconfigurable output. This feature allows using the ballast in lighting systems that currently use traditional discharge lamps, as well as keeping the same ballast when discharge lamps are replaced by LED modules in the near future, when LED street lighting systems will be more affordable. Additionally, since the lighting system is designed to be used in rural areas where there is no public electricity, each lighting point incorporates a system to convert solar energy into continuous voltage by means of photovoltaic panels. In this work, energy saving issues are taken into account.

The effectiveness of light-emitting diode lighting for providing circadian stimulus in office spaces while minimizing energy use

2019 ◽  
Vol 52 (2) ◽  
pp. 167-188 ◽  
Author(s):  
C Jarboe ◽  
J Snyder ◽  
MG Figueiro
Keyword(s):  
Energy Use ◽  
Spectral Power ◽  
Light Emitting Diode ◽  
Visual Performance ◽  
Luminous Intensity ◽  
Light Emitting ◽  
Lighting Conditions ◽  
Office Space ◽  
Discomfort Glare ◽  
Architectural Lighting

Architectural lighting has traditionally addressed visual performance and horizontal illuminance on the work plane, later focussing on energy efficiency, while only recently paying particular regard to human health outcomes. The present study evaluated the effectiveness of several light-emitting diode lighting strategies for delivering circadian stimulus to occupants of a typical office space while minimizing energy use. The study employed photometric simulations in a typical open-office space, delivering a criterion circadian stimulus of 0.3 to calculation points modelled at the simulated occupants’ eye level. Six luminaire types, two luminous intensity distributions, six spectral power distributions and two horizontal illuminances were evaluated, resulting in 144 unique lighting conditions. Additionally, the study calculated the discomfort glare for selected luminaires with the highest total lumen output, smallest aperture and direct-only luminous intensity distributions at the higher of the two horizontal illuminances (500 lx). The most impactful strategy involved supplementing common overhead lighting with a desktop luminaire delivering light directly to the simulated office occupants’ eyes, which provided greater circadian stimulus and used less energy than overhead luminaires that were capable of delivering the criterion circadian stimulus of 0.3.

Thermal Performance of a Light Emitting Diode Light Engine for a Multipurpose Automotive Exterior Lighting System With Competing Board Technologies

2017 ◽  
Vol 139 (2) ◽  
Author(s):  
Umut Zeynep Uras ◽  
Mehmet Arık ◽  
Enes Tamdoğan
Keyword(s):  
Thermal Performance ◽  
Computational Models ◽  
Printed Circuit Boards ◽  
Light Emitting Diode ◽  
Ambient Conditions ◽  
Vapor Chamber ◽  
Metal Core ◽  
Light Emitting ◽  
Lighting Systems ◽  
Light Engine

In recent years, light emitting diodes (LEDs) have become an attractive technology for general and automotive illumination systems replacing old-fashioned incandescent and halogen systems. LEDs are preferable for automobile lighting applications due to its numerous advantages such as low power consumption and precise optical control. Although these solid state lighting (SSL) products offer unique advantages, thermal management is one of the main issues due to severe ambient conditions and compact volume. Conventionally, tightly packaged double-sided FR4-based printed circuit boards (PCBs) are utilized for both driver electronic components and LEDs. In fact, this approach will be a leading trend for advanced internet of things applications embedded LED systems in the near future. Therefore, automotive lighting systems are already facing with tight-packaging issues. To evaluate thermal issues, a hybrid study of experimental and computational models is developed to determine the local temperature distribution on both sides of a three-purpose automotive light engine for three different PCB approaches having different materials but the same geometry. Both results showed that FR4 PCB has a temperature gradient (TMaxBoard to TAmbient) of over 63 °C. Moreover, a number of local hotspots occurred over FR4 PCB due to low thermal conductivity. Later, a metal core PCB is investigated to abate local hot spots. A further study has been performed with an advanced heat spreader board based on vapor chamber technology. Results showed that a thermal enhancement of 7.4% and 25.8% over Al metal core and FR4-based boards with the advanced vapor chamber substrate is observed. In addition to superior thermal performance, a significant amount of lumen extraction in excess of 15% is measured, and a higher reliability rate is expected.

Sign in / Sign up

Export Citation Format

Share Document