scholarly journals Melt-Processing and Properties of Coaxial Fibers Incorporating Carbon Nanotubes

2012 ◽  
Vol 7 (3) ◽  
pp. 155892501200700 ◽  
Author(s):  
Alexis Laforgue ◽  
Michel F. Champagne ◽  
Jean Dumas ◽  
Lucie Robitaille
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Melt Spinning ◽  
Data Transfer ◽  
Melt Processing ◽  
Multiwalled Carbon ◽  
Insulating Layer ◽  
Low Viscosity ◽  
One Step ◽  
Coaxial Fibers

Polypropylene-multiwalled carbon nanotube (PP-CNT) composites were spun into fibers using melt-spinning methods. The CNT content was varied by diluting the commercial masterbatch with a low viscosity PP homopolymer grade. The conductivity, as well as the mechanical properties, of the fibers were systematically tested in order to find the optimal formulation. Post-stretching was used to improve the mechanical properties of the fibers as well as to decrease the fiber diameters. Fibers having a conductivity of 0.4 S/cm, a Young's modulus of 5.4 GPa and a tensile strength of 250 MPa were obtained after a three-fold stretching. Trilayer coaxial fibers similar to data transfer coaxial cables (two conductive layers separated by an insulating layer) were then produced in a one-step melt-spinning method using a specially designed die, followed by solid state post-stretching.

Electrical and mechanical properties of phenoxy/multiwalled carbon nanotubes multifilament yarn processed by melt spinning

2012 ◽  
Vol 82 (20) ◽  
pp. 2106-2115 ◽  
Author(s):  
Jonas Bouchard ◽  
Aurélie Cayla ◽  
Vincent Lutz ◽  
Christine Campagne ◽  
Eric Devaux
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Melt Spinning ◽  
Rheological Behaviour ◽  
Melt Flow Index ◽  
Flow Index ◽  
Electrical Measurements ◽  
Multiwalled Carbon ◽  
Multifilament Yarn

Nanocomposites based on Poly ((hydroxy ether) of bisphenol A) (Phenoxy) filled with multiwalled carbon nanotubes has been prepared by extrusion. Rheological behaviour and thermal degradation of these nanocomposites have been studied by melt flow index and thermogravimetric analysis. The results show that the addition of carbon nanotubes up to 2wt% increases the viscosity but does not modify significantly the spinnability of the compounds. Moreover, incorporation of these nanofillers allows an improvement of the thermal decomposition. In a second step, these nanocomposites have been processed by melt spinning to produce multifilament yarn. Transmission electron microscopy observations have been done to study carbon nanotubes dispersion and orientation. Nanocomposite morphology correlated with electrical measurements reveal an electrical percolation around 1.5 wt.% without decreasing significantly mechanical properties.

Effect of Multiwalled Carbon Nanotubes On Mechanical Properties of Concrete

2012 ◽  
Vol 2 (6) ◽  
pp. 166-168 ◽  
Author(s):  
Dr.T.Ch.Madhavi Dr.T.Ch.Madhavi ◽  
◽  
Pavithra.P Pavithra.P ◽  
Sushmita Baban Singh Sushmita Baban Singh ◽  
S.B.Vamsi Raj S.B.Vamsi Raj ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Multiwalled Carbon

Mechanical Properties Of Polyaniline / Multi-walled Carbon Nanotube Composite Films

2003 ◽  
Vol 791 ◽  
Author(s):  
P. C. Ramamurthy ◽  
W. R. Harrell ◽  
R. V. Gregory ◽  
B. Sadanadan ◽  
A. M. Rao
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Composite Films ◽  
Weight Percent ◽  
Organic Electronic Devices ◽  
Multiwalled Carbon ◽  
Multi Walled Carbon Nanotube ◽  
Contact Devices ◽  
Carbon Nanotube Composite

ABSTRACTHigh molecular weight polyaniline / multi-walled carbon nanotube composite films were fabricated using solution processing. Composite films with various weight percentages of multiwalled carbon nanotubes were fabricated. Physical properties of these composites were analyzed by thermogravimetric analysis, tensile testing, and scanning electron microscopy. These results indicate that the addition of multiwalled nanotubes to polyaniline significantly enhances the mechanical properties of the films. In addition, metal–semiconductor (composite) (MS) contact devices were fabricated, and it was observed that the current level in the films increased with increasing multiwalled nanotube content. Furthermore, it was observed that polyaniline containing one weight percent of carbon nanotubes appears to be the most promising composition for applications in organic electronic devices.

PLA/Carbon Nanotubes Multifilament Yarns for Relative Humidity Textile Sensor

2011 ◽  
Vol 6 (3) ◽  
pp. 155892501100600 ◽  
Author(s):  
Eric Devaux ◽  
Carole Aubry ◽  
Christine Campagne ◽  
Maryline Rochery
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Relative Humidity ◽  
Melt Spinning ◽  
Flexible Sensor ◽  
Spinning Process ◽  
Textile Sensor ◽  
Multifilament Yarns

Polylactide (PLA) was mixed with 4 wt.% of carbon nanotubes (CNTs) to produce electrical conductive multifilament yarns by melt spinning process for humidity detection. Thanks to a variation of electrical conductivity, this flexible sensor could detect the moisture presence. The introduction of plasticizer was necessary to ensure higher fluidity and drawability of the blend during the spinning process. The plasticizer modifies the crystallinity and the mechanical properties of the yarns. The effectiveness of this sensor (PLA/4 wt.% CNTs fibres) sensitive to humidity, is optimal when the spinning conditions are adapted. In this way, the temperature and the rate of the drawing roll were reduced. The influence of these parameters on the crystallinity, the mechanical properties and the sensitivity of the yarns were studied. Once the appropriate spinning conditions found, one humidity sensitive yarn was processed and the repeatability and efficient reversibility of its sensitivity were highlighted.

Thermal and mechanical properties of a nanocomposite of a photocurable epoxy-acrylate resin and multiwalled carbon nanotubes

2011 ◽  
Vol 528 (13-14) ◽  
pp. 4318-4324 ◽  
Author(s):  
Marcos N. dos Santos ◽  
Carlos V. Opelt ◽  
Fernando H. Lafratta ◽  
Carlos M. Lepienski ◽  
Sérgio H. Pezzin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Epoxy Acrylate ◽  
Thermal And Mechanical Properties ◽  
Multiwalled Carbon ◽  
Acrylate Resin ◽  
Epoxy Acrylate Resin
Sign in / Sign up

Export Citation Format

Share Document