scholarly journals Online human-like redundancy optimization for tele-operated anthropomorphic manipulators

2018 ◽  
Vol 15 (6) ◽  
pp. 172988141881469 ◽  
Author(s):  
Hang Su ◽  
Nima Enayati ◽  
Luca Vantadori ◽  
Andrea Spinoglio ◽  
Giancarlo Ferrigno ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Robot Arm ◽  
Biologically Inspired ◽  
Natural Interaction ◽  
Redundant Robots ◽  
Tracking Tasks ◽  
Human Ability ◽  
Swivel Angle ◽  
Nonlinear Regression Method ◽  
Robot Cooperation

Robot human-like behavior can enhance the performance of human–robot cooperation with prominently improved natural interaction. This also holds for redundant robots with an anthropomorphic kinematics. In this article, we translated human ability of managing redundancy to control a seven degrees of freedom anthropomorphic robot arm (LWR4+, KUKA, Germany) during tele-operated tasks. We implemented a nonlinear regression method—based on neural networks—between the human arm elbow swivel angle and the hand target pose to achieve an anthropomorphic arm posture during tele-operation tasks. The method was assessed in simulation and experiments were performed with virtual reality tracking tasks in a lab environment. The results showed that the robot achieves a human-like arm posture during tele-operation, and the subjects prefer to work with the biologically inspired robot. The proposed method can be applied in control of anthropomorphic robot manipulators for tele-operated collaborative tasks, such as in factories or in operating rooms.

scholarly journals Energy Optimization of Functionally Redundant Robots through Motion Design

2020 ◽  
Vol 10 (9) ◽  
pp. 3022
Author(s):  
Paolo Boscariol ◽  
Roberto Caracciolo ◽  
Dario Richiedei ◽  
Alberto Trevisani
Keyword(s):  
Energy Efficiency ◽  
Dynamic Model ◽  
Degrees Of Freedom ◽  
Energy Savings ◽  
Robot Arm ◽  
Redundant Robots ◽  
Performance Metric ◽  
Serial Robot ◽  
Motion Profile ◽  
Motion Design

This work proposes to exploit functional redundancy as a tool to enhance the energy efficiency of a robotic system. In a functionally redundant system, i.e., one in which the number of degrees of freedom required to complete the task is smaller than the number of available degrees of freedom, the motion of the extra degrees of freedom can be tailored to enhance a performance metric. This work showcases a method that can be used to effectively enhance the energy efficiency through motion design, using a detailed dynamic model of the UR5 serial robot arm. The method is based on an optimization of the motion profile, using a parametrized description of the end-effector orientation: the results showcase an increased efficiency that allows energy savings up to 20.8%, according to the energy consumption results according to the electro-mechanical dynamic model of the robot.

Comparison of null-space and minimal null-space control algorithms

Robotica ◽  
2007 ◽  
Vol 25 (5) ◽  
pp. 511-520 ◽  
Author(s):  
Bojan Nemec ◽  
Leon Žlajpah ◽  
Damir Omrčen
Keyword(s):  
Degrees Of Freedom ◽  
Null Space ◽  
Space Velocity ◽  
Control Algorithms ◽  
Robot Arm ◽  
Velocity Control ◽  
Redundant Robots ◽  
Operational Space ◽  
Space Projection ◽  
The Stability

SUMMARYThis paper deals with the stability of null-space velocity control algorithms in extended operational space for redundant robots. We compare the performance of the control algorithm based on the minimal null-space projection and generalized-inverse-based projection into the Jacobian null-space. We show how the null-space projection affects the performance of the null-space tracking algorithm. The results are verified with the simulation and real implementation on a redundant mobile robot composed of 3 degrees of freedom (DOFs) mobile platform and 7-DOF robot arm.

scholarly journals Biologically Inspired Design and Development of a Variable Stiffness Powered Ankle-Foot Prosthesis

2019 ◽  
Vol 11 (4) ◽  
Author(s):  
Alexander Agboola-Dobson ◽  
Guowu Wei ◽  
Lei Ren
Keyword(s):  
Lower Limb ◽  
Degrees Of Freedom ◽  
Sagittal Plane ◽  
Frontal Plane ◽  
Variable Stiffness ◽  
Plane Motion ◽  
Biologically Inspired ◽  
Passive Rotation ◽  
Ground Conditions ◽  
Biologically Inspired Design

Recent advancements in powered lower limb prostheses have appeased several difficulties faced by lower limb amputees by using a series-elastic actuator (SEA) to provide powered sagittal plane flexion. Unfortunately, these devices are currently unable to provide both powered sagittal plane flexion and two degrees of freedom (2-DOF) at the ankle, removing the ankle’s capacity to invert/evert, thus severely limiting terrain adaption capabilities and user comfort. The developed 2-DOF ankle system in this paper allows both powered flexion in the sagittal plane and passive rotation in the frontal plane; an SEA emulates the biomechanics of the gastrocnemius and Achilles tendon for flexion while a novel universal-joint system provides the 2-DOF. Several studies were undertaken to thoroughly characterize the capabilities of the device. Under both level- and sloped-ground conditions, ankle torque and kinematic data were obtained by using force-plates and a motion capture system. The device was found to be fully capable of providing powered sagittal plane motion and torque very close to that of a biological ankle while simultaneously being able to adapt to sloped terrain by undergoing frontal plane motion, thus providing 2-DOF at the ankle. These findings demonstrate that the device presented in this paper poses radical improvements to powered prosthetic ankle-foot device (PAFD) design.

Cooperation and Null-Space Control of Networked Omni-Directional Mobile Manipulators

2020 ◽  
Author(s):  
Michael John Chua ◽  
Yen-Chen Liu
Keyword(s):  
Degrees Of Freedom ◽  
Null Space ◽  
Kinematic Model ◽  
Mobile Manipulator ◽  
Main Task ◽  
Mobile Manipulators ◽  
Robot Arm ◽  
Task Space ◽  
End Effector ◽  
Mobile Base

Abstract This paper presents cooperation and null-space control for networked mobile manipulators with high degrees of freedom (DOFs). First, kinematic model and Euler-Lagrange dynamic model of the mobile manipulator, which has an articulated robot arm mounted on a mobile base with omni-directional wheels, have been presented. Then, the dynamic decoupling has been considered so that the task-space and the null-space can be controlled separately to accomplish different missions. The motion of the end-effector is controlled in the task-space, and the force control is implemented to make sure the cooperation of the mobile manipulators, as well as the transportation tasks. Also, the null-space control for the manipulator has been combined into the decoupling control. For the mobile base, it is controlled in the null-space to track the velocity of the end-effector, avoid other agents, avoid the obstacles, and move in a defined range based on the length of the manipulator without affecting the main task. Numerical simulations have been addressed to demonstrate the proposed methods.

scholarly journals Optimizing the structure and movement of a robotic bat with biological kinematic synergies

2018 ◽  
Vol 37 (10) ◽  
pp. 1233-1252 ◽  
Author(s):  
Jonathan Hoff ◽  
Alireza Ramezani ◽  
Soon-Jo Chung ◽  
Seth Hutchinson
Keyword(s):  
Principal Component Analysis ◽  
Topological Structure ◽  
Degrees Of Freedom ◽  
Dimensional Space ◽  
Principal Component ◽  
Biologically Inspired ◽  
Wing Kinematics ◽  
Wing Motion ◽  
Kinematic Synergies ◽  
Low Dimensional

In this article, we present methods to optimize the design and flight characteristics of a biologically inspired bat-like robot. In previous, work we have designed the topological structure for the wing kinematics of this robot; here we present methods to optimize the geometry of this structure, and to compute actuator trajectories such that its wingbeat pattern closely matches biological counterparts. Our approach is motivated by recent studies on biological bat flight that have shown that the salient aspects of wing motion can be accurately represented in a low-dimensional space. Although bats have over 40 degrees of freedom (DoFs), our robot possesses several biologically meaningful morphing specializations. We use principal component analysis (PCA) to characterize the two most dominant modes of biological bat flight kinematics, and we optimize our robot’s parametric kinematics to mimic these. The method yields a robot that is reduced from five degrees of actuation (DoAs) to just three, and that actively folds its wings within a wingbeat period. As a result of mimicking synergies, the robot produces an average net lift improvesment of 89% over the same robot when its wings cannot fold.

scholarly journals Detachable Robotic Grippers for Human-Robot Collaboration

2021 ◽  
Vol 8 ◽  
Author(s):  
Zubair Iqbal ◽  
Maria Pozzi ◽  
Domenico Prattichizzo ◽  
Gionata Salvietti
Keyword(s):  
Degrees Of Freedom ◽  
Tactile Feedback ◽  
Industrial Robots ◽  
Physical Interaction ◽  
Robot Arm ◽  
Robotic Hands ◽  
End Effector ◽  
External Power ◽  
Self Powered ◽  
Automatic Tool

Collaborative robots promise to add flexibility to production cells thanks to the fact that they can work not only close to humans but also with humans. The possibility of a direct physical interaction between humans and robots allows to perform operations that were inconceivable with industrial robots. Collaborative soft grippers have been recently introduced to extend this possibility beyond the robot end-effector, making humans able to directly act on robotic hands. In this work, we propose to exploit collaborative grippers in a novel paradigm in which these devices can be easily attached and detached from the robot arm and used also independently from it. This is possible only with self-powered hands, that are still quite uncommon in the market. In the presented paradigm not only hands can be attached/detached to/from the robot end-effector as if they were simple tools, but they can also remain active and fully functional after detachment. This ensures all the advantages brought in by tool changers, that allow for quick and possibly automatic tool exchange at the robot end-effector, but also gives the possibility of using the hand capabilities and degrees of freedom without the need of an arm or of external power supplies. In this paper, the concept of detachable robotic grippers is introduced and demonstrated through two illustrative tasks conducted with a new tool changer designed for collaborative grippers. The novel tool changer embeds electromagnets that are used to add safety during attach/detach operations. The activation of the electromagnets is controlled through a wearable interface capable of providing tactile feedback. The usability of the system is confirmed by the evaluations of 12 users.

A remote center of motion robotic arm for computer assisted surgery

Robotica ◽  
1996 ◽  
Vol 14 (1) ◽  
pp. 103-109 ◽  
Author(s):  
B. Eldridge ◽  
K. Gruben ◽  
D. LaRose ◽  
J. Funda ◽  
S. Gomory ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Computer Assisted Surgery ◽  
Video Camera ◽  
Robotic Arm ◽  
Computer Assisted ◽  
Robot Arm ◽  
Minimally Invasive Surgical ◽  
Tissue Manipulation ◽  
Servo Controller ◽  
Rotation Stage

SummaryWe have designed a robotic arm based on a double parallel four bar linkage to act as an assistant in minimally invasive surgical procedures. The remote center of motion (RCM) geometry of the robot arm kinematically constraints the robot motion such that minimal translation of an instrument held by the robot takes place at the entry portal into the patientApos;s body. In addition to the two rotational degrees of freedom comprising the RCM arm, distal translation and rotation are provided to manoeuver the instrument within the patient's body about an axis coincident with the RCM. An XYZ translation stage located proximal to the RCM arm provides positioning capability to establish the RCM location relative to the patients anatomy. An electronics set capable of controlling the system, as well as performing a series of safety checks to verify correct system operation, has also been designed and constructed. The robot is capable of precise positional motion. Repeatability in the ±10 micron range is demonstrated. The complete robotic system consists of the robot hardware and an IBM PC-AT based servo controller connected via a custom shared memory link to a host IBM PS/2. For laparoscopic applications, the PS/2 includes an image capture board to capture and process video camera images. A camera rotation stage has also been designed for this application. We have successfully demonstrated this system as an assistant in a laparoscopic cholecystectomy. Further applications for this system involving active tissue manipulation are under development.

Dynamics of redundant robots – inverse solutions

Robotica ◽  
1986 ◽  
Vol 4 (4) ◽  
pp. 263-267 ◽  
Author(s):  
Ronald L. Huston ◽  
Timothy P. King
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Solution Algorithm ◽  
Redundant Robot ◽  
Redundant Robots ◽  
Revolute Joints ◽  
Inverse Kinematics Problem ◽  
Inverse Solutions ◽  
Natural Dynamics ◽  
Least Energy

SUMMARYThe dynamics of “simple, redundant robots” are developed. A “redundant” robot is a robot whose degrees of freedom are greater than those needed to perform a given kinetmatic task. A “simple” robot is a robot with all joints being revolute joints with axes perpendicular or parallel to the arm segments. A general formulation, and a solution algorithm, for the “inverse kinematics problem” for such systems, is presented. The solution is obtained using orthogonal complement arrays which in turn are obtained from a “zero-eigenvalues” algorithm. The paper concludes with an assertion that this solution, called the “natural dynamics solution,” is optimal in that it requires the least energy to drive the robot.

Underactuated Part Alignment System (UPAS) for Industrial Assembly Tasks

2011 ◽  
Author(s):  
Brian J. Slaboch ◽  
Philip Voglewede
Keyword(s):  
Degrees Of Freedom ◽  
Vertical Plane ◽  
Cost Effective ◽  
Robotic Assembly ◽  
Robot Arm ◽  
Planning Techniques ◽  
Alignment System ◽  
Compliant Assembly ◽  
Industrial Assembly ◽  
Assembly Tasks

This paper introduces the Underactuated Part Alignment System (UPAS) as a cost-effective and flexible approach to aligning parts in the vertical plane prior to an industrial robotic assembly task. The advantage of the UPAS is that it utilizes the degrees of freedom (DOFs) of a SCARA (Selective Compliant Assembly Robot Arm) type robot in conjunction with an external fixed post to achieve the desired part alignment. Three path planning techniques will be presented that can be used with the UPAS to achieve the proper part rotation.

scholarly journals Robotic Training System for Upper Limb Rehabilitation1

2014 ◽  
Vol 18 (2) ◽  
pp. 235 ◽  
Author(s):  
Mauricio Torres Quezada ◽  
Roberto Sagaró Zamora ◽  
Leonardo Broche Vázquez ◽  
Denis Delisle Rodríguez ◽  
Alberto Lopez Delis
Keyword(s):  
User Interface ◽  
Power Systems ◽  
Degrees Of Freedom ◽  
Integrated Approach ◽  
Structure Design ◽  
Training System ◽  
Robot Arm ◽  
Robotic Training ◽  
Physical Strength ◽  
El Sistema

IntroIntroducción: Un exoesqueleto se conceptualiza como un mecanismo estructural externo cuyos segmentos y articulaciones se corresponden con las del cuerpo humano y es capaz de coordinar y amplificar sus movimientos. El objetivo del trabajo se enfoca en desarrollar una tecnología de plataforma robótica de asistencia y métodos de cuantificación para la rehabilitación motora de miembros superiores en ambientes clínicos y ambulatorios para pacientes con afecciones motoras como resultados de enfermedades cerebrovasculares.Métodos: Se presenta a partir de una concepción integradora el diseño del prototipo de un exoesqueleto que permite al paciente realizar movimientos combinados a partir de los cuatro grados de libertad que provee el dispositivo de rehabilitación. El sistema es controlado por medio de una interfaz de usuario desarrollada en Labview que soporta el control e interacción del usuario con el exoesqueleto, lo cual posibilita que el terapeuta puede modificar la rutina que debe realizar el paciente incluyendo nuevas trayectorias y el número de repeticiones a seguir por el exoesqueleto en las articulaciones de hombro, codo y muñeca. Adicionalmente, posibilita la retroalimentación visual de la actividad electromiográfica del paciente durante la rehabilitación.Resultados: Se presenta el diseño mecánico de la armadura, implementación de los sistemas de potencia, el desarrollo del sistema de control y de la interfaz de usuario así como su integración con el sistema mecánico.Conclusiones: Se desarrolla y pone en funcionamiento una avanzada plataforma robótica capaz de desarrollar diversas rutinas terapéuticas combinando 4 grados de libertad en hombro, codo y muñeca, capaz de controlar a través de la interfaz desarrollada desplazamientos regulados, exactos y repetitivos, así como seguir cronológicamente la evolución del paciente registrando la actividad mioeléctrica durante el proceso de rehabilitación.<br /><br /><br /><br />Background: Robot-assisted therapy or exoskeleton is an active mechanical device that can be easily adjusted to fit a different patient limb length, and is able to coordinate and amplify movements. The aim of this study focuses on developing a robotic training system and quantification methods for upper limbs rehabilitation in clinic environments to be used in survivor stroke patients with motor disorders or loss of physical strength on one side of the body.Methods: From an integrated approach, a design of one exoskeleton is presented which allows patients perform complex movements in four degrees of freedom (DOF) rehabilitation system. The system is controlled by means of user interface developed with Lab view v8.6 software that supports control and user interaction with the exoskeleton; so it’s possible for therapist to modify the patient routine including new movements and a number of repetitions in articulating joints of shoulder, elbow and wrist. On other hand system permits bio- feedback of electromyogram patient activity during rehabilitation sessions.Results: Biomechanical analyses and structure design, implementation of power systems, the development of the control system and user interface as well as its integration with the mechanical system is presented.</p><p><br />Conclusions: A robot arm exoskeleton device with four DOF; able to develop complex, accurate and repetitive therapeutic routines for articulating joints of shoulder, elbow and wrist trough an interface is shown. The device permits to follow chronologically patient outcomes recording the electromyogram activity during rehabilitation progress.

Sign in / Sign up

Export Citation Format

Share Document