scholarly journals Interior singularity analysis for a 2(3HUS+S) parallel manipulator with descending matrix rank method

2019 ◽  
Vol 16 (1) ◽  
pp. 172988141982684
Author(s):  
Feng Guo ◽  
Gang Cheng ◽  
Zunzhong Zhao
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singular Locus ◽  
Singularity Analysis ◽  
Normal Operation ◽  
Motion Path ◽  
Moving Platforms ◽  
Singular Configuration ◽  
The Relationship ◽  
Interior Singularity

Singularity analysis is one of the basic problems for parallel manipulators. When a manipulator moves in a singular configuration, the motion and transmission performance are poor. In certain serious cases, the normal operation could be damaged. Based on the topology structure and kinematics analysis of a 2(3HUS+S) parallel manipulator, the Jacobian matrices were established. Then, the singular locus surface was obtained by numerical simulation. In addition, the relationship between the motion path curve and the singular locus surface was analyzed. In this study, α, β, and γ are the attitude angles that describe the motion of moving platforms. There is a nonsingular attitude space in singular locus surfaces, and the singular locus surface is a single surface in a small attitude angle range. The nonsingular attitude space increases as the absolute value of γ increases, and singularity could be avoided when γ is large. Furthermore, the motion path curve passes through the singular locus surface two times, and the two intersection points are consistent with the positions where the motion dexterity is equal to zero. This study provides new insights on the singularity analysis of parallel manipulators, particularly for the structure parameter optimization of the nonsingular attitude space.

Forward Displacement Analysis of a Linearly Actuated Quadratic Spherical Parallel Manipulator

2010 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment Gosselin ◽  
James M. Ritchie
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Alternative Formulation ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Actuated Joints ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

A quadratic parallel manipulator refers to a parallel manipulator with a quadratic characteristic polynomial. This paper revisits the forward displacement analysis (FDA) of a linearly actuated quadratic spherical parallel manipulator. An alternative formulation of the kinematic equations of the quadratic spherical parallel manipulator is proposed. The singularity analysis of the quadratic spherical parallel manipulator is then dealt with. A new type of singularity of parallel manipulators — leg actuation singularity — is identified. If a leg is in a leg actuation singular configuration, the actuated joints in this leg cannot be actuated even if the actuated joints in other legs are released. A formula is revealed that produces a unique current solution to the FDA for a given set of inputs. The input space is also revealed for the quadratic spherical parallel manipulator in order to guarantee that the robot works in the same assembly mode. This work may facilitate the control of the quadratic spherical parallel manipulator.

Forward Displacement Analysis and Singularity Analysis of a Special 2-DOF 5R Spherical Parallel Manipulator

2011 ◽  
Vol 3 (2) ◽  
Author(s):  
Xianwen Kong
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Type I ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Self Motion ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

This paper deals with the forward displacement analysis and singularity analysis of a special 2-DOF 5R spherical parallel manipulator, in which the angle between the axes of any two adjacent revolute joints is a right angle. An alternative formulation of the kinematic equations of the 5R spherical parallel manipulator is proposed. A formula is then derived to produce directly the unique current solution to the forward displacement analysis of the 5R spherical parallel manipulator. It will also be addressed to keep the spherical parallel manipulator in the same working mode and assembly mode by simply restraining the range of an input angle. Unlike other parallel manipulators, the 5R spherical parallel manipulator always undergoes self-motion in a type-II singular configuration, and the 3R leg of the 5R spherical parallel manipulator also always undergoes self-motion in a type-I singular configuration.

A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel Manipulators

2012 ◽  
Vol 4 (4) ◽  
Author(s):  
Xin-Jun Liu ◽  
Chao Wu ◽  
Jinsong Wang
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Challenging Problem ◽  
Performance Indices ◽  
New Approach ◽  
Singular Configurations ◽  
Different Types ◽  
Force Transmissibility ◽  
Singular Configuration

Singularity analysis is one of the most important issues in the field of parallel manipulators. An approach for singularity analysis should be able to not only identify all possible singularities but also explain their physical meanings. Since a parallel manipulator is always out of control at a singularity and its neighborhood, it should work far from singular configurations. However, how to measure the closeness between a pose and a singular configuration is still a challenging problem. This paper presents a new approach for singularity analysis of parallel manipulators by taking into account motion/force transmissibility. Several performance indices are introduced to measure the closeness to singularities. By using these indices, a uniform “metric” can be found to represent the closeness to singularities for different types of nonredundant parallel manipulators.

Workspace and singularity analysis of a 3-DOF planar parallel manipulator with actuation redundancy

Robotica ◽  
2009 ◽  
Vol 27 (1) ◽  
pp. 51-57 ◽  
Author(s):  
Jinsong Wang ◽  
Jun Wu ◽  
Tiemin Li ◽  
Xinjun Liu
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Actuation Redundancy ◽  
Hybrid Machine Tool ◽  
Planar Parallel Manipulator ◽  
Redundantly Actuated ◽  
Value Decomposition ◽  
The Relationship ◽  
Orientation Workspace

SUMMARYThis paper deals with the position workspace, orientation workspace, and singularity of a 3-degree-of-freedom (DOF) planar parallel manipulator with actuation redundancy, which is created by introducing a redundant link with active actuator to a 3-DOF nonredundant parallel manipulator. Based on the kinematic analysis, the position workspace and orientation workspace of the redundantly actuated parallel manipulator and its corresponding nonredundant parallel manipulator are analyzed, respectively. In the singularity analysis phase, the relationship between the generalized input velocity and the generalized output velocity is researched on the basis of the theory of singular value decomposition. Then a method to investigate the singularity of parallel manipulators is presented, which is used to determine the singularity of the redundantly actuated parallel manipulator. In contrast to the corresponding nonredundant parallel manipulator, the redundant one has larger orientation workspace and less singular configurations. The redundantly actuated parallel manipulator is incorporated into a 4-DOF hybrid machine tool which also includes a feed worktable to demonstrate its applicability.

Singularity Analysis of Limited-DOF Parallel Manipulator Based on Jacobian Matrixes

2011 ◽  
Vol 141 ◽  
pp. 488-492
Author(s):  
Xin You Li ◽  
W.Y. Chen
Keyword(s):  
Parallel Manipulator ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Parallel Machine ◽  
Singularity Analysis ◽  
Mechanical Analysis ◽  
Singular Problem ◽  
Velocity Analysis ◽  
Force Transformation ◽  
The Relationship

To analyze effects of singularity on parallel manipulator, the Jacobian matrixes were introduced as the indexes for analyzing the 3UPS/S parallel machine. The relationship between the velocity Jacobian matrix and the force-transformation matrix was established, and their equivalence was verified through the determinant and condition number’ reciprocal of the matrixes. Effects of singularity on motion accuracy, actuator forces and constrained forces were investigated within the nutation angle’range. The result showed that velocity analysis and mechanical analysis were consistent for 3UPS/S parallel machine in the aspect of singularity, and proved that the accuracy and actuator force properties were deteriorated when approach to singularity. The approach could be applied to other parallel manipulators in the research on singular problem as a reference.

Forward Displacement Analysis of a Linearly Actuated Quadratic Spherical Parallel Manipulator

2011 ◽  
Vol 3 (1) ◽  
Author(s):  
Xianwen Kong ◽  
Clément Gosselin ◽  
James M. Ritchie
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Alternative Formulation ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Actuated Joints ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

A quadratic parallel manipulator refers to a parallel manipulator with a quadratic characteristic polynomial. This paper revisits the forward displacement analysis (FDA) of a linearly actuated quadratic spherical parallel manipulator. An alternative formulation of the kinematic equations of the quadratic spherical parallel manipulator is proposed. The singularity analysis of the quadratic spherical parallel manipulator is then dealt with. A new type of singularity of parallel manipulators—leg actuation singularity—is identified. If a leg is in a leg actuation singular configuration, the actuated joints in this leg cannot be actuated even if the actuated joints in other legs are released. A formula is revealed that produces a unique current solution to the FDA for a given set of inputs. The input space is also revealed for the quadratic spherical parallel manipulator in order to guarantee that the robot works in the same assembly mode. This work may facilitate the control of the quadratic spherical parallel manipulator.

Forward Displacement Analysis and Singularity Analysis of a 2-DOF 5R Spherical Parallel Manipulator

2009 ◽  
Author(s):  
Xianwen Kong
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Alternative Formulation ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Self Motion ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

This paper deals with the forward displacement analysis and singularity analysis of a 2-DOF 5R spherical parallel manipulator. An alternative formulation of the kinematic equations of the 2-DOF spherical parallel manipulator is proposed. A formula is then derived to produce directly the unique current solution to the FDA of the 2-DOF spherical parallel manipulator. It is proved that the formula is associated with the same assembly mode and working mode as the reference configuration of the spherical parallel manipulator. Unlike other parallel manipulators, the 2-DOF 5R spherical parallel manipulator always undergoes self-motion in a Type 2 singular configuration, and the 3R leg of the 2-DOF spherical parallel manipulator also always undergoes self-motion in a Type 1 singular configuration.

Effect of links deformation on motion precision of parallel manipulator based on flexible dynamics

2017 ◽  
Vol 44 (6) ◽  
pp. 776-787 ◽  
Author(s):  
Chunxia Zhu ◽  
Jay Katupitiya ◽  
Jing Wang
Keyword(s):  
Parallel Manipulator ◽  
High Speed ◽  
Beam Theory ◽  
Parallel Manipulators ◽  
Dynamic Responses ◽  
Axial Deformation ◽  
Content Type ◽  
High Performing ◽  
Coupling Equations ◽  
The Relationship

Purpose Manipulator motion accuracy is a fundamental requirement for precision manufacturing equipment. Light weight manipulators in high speed motions are vulnerable to deformations. The purpose of this work is to analyze the effect of link deformation on the motion precision of parallel manipulators. Design/methodology/approach The flexible dynamics model of the links is first established by applying the Euler–Bernoulli beam theory and the assumed modal method. The rigid-flexible coupling equations of the parallel mechanism are further derived by using the Lagrange multiplier approach. The elastic energy resulting from spiral motion and link deformations are computed and analyzed. Motion errors of the 3-link torque-prismatic-torque parallel manipulator are then evaluated based on its inverse kinematics. The validation experiments are also conducted to verify the numerical results. Findings The lateral deformation and axial deformation are largest at the middle of the driven links. The axial deformation at the middle of the driven link is approximately one-tenth of the transversal deformation. However, the elastic potential energy of the transversal deformation is much smaller than the elastic force generated from axial deformation. Practical implications Knowledge on the relationship between link deformation and motion precision is useful in the design of parallel manipulators for high performing dynamic responses. Originality/value This work establishes the relationship between motion precision and the amount of link deformation in parallel manipulators.

Improving Motion Stability of the Plane 3-RPR Parallel Manipulator at Singular Configuration

2018 ◽  
Author(s):  
Yu-Tong Li ◽  
Yu-Xin Wang
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Angular Speed ◽  
Motion Stability ◽  
Singular Configurations ◽  
Movable Platform ◽  
Singular Configuration ◽  
Translation Type ◽  
External Forces ◽  
Gerschgorin Circle

Kinematic parameters have significant influences on the motion stability of parallel manipulators at singular configureations. Taking the plane 3-RPR parallel manipulator as an example, the motion stability at different types of singular configurations corresponding to the angular speed and velocity of the movable platform are investigated. At first, the second order of uncoupled dynamics equation for the 3-RPR parallel manipulator is established with the aid of the second class Lagrange approach. According to the Lyapunov first approximate stability criterion, the approximate conditions for the 3-RPR parallel manipulator with a stabile motion at singular configurations are determined based on the Gerschgorin circle theorem. Next, the exact Hurwitz criterion is utilized to study the motion stability and the load capability of the manipulator corresponding to the angular speed and velocity of the movable platform, as well as the directions of the external forces at two kinds of singular configurations: with a gained rotation-type DOF, and with a gained translation-type DOF, respectively. The results show that increasing both the angular speed and the velocity of the mass center of the movable platform can efficiently improve the motion stability of the 3-RPR parallel manipulator at singular configurations.

scholarly journals Singularity Conditions of 3T1R Parallel Manipulators With Identical Limb Structures

2012 ◽  
Vol 4 (1) ◽  
Author(s):  
Semaan Amine ◽  
Mehdi Tale Masouleh ◽  
Stéphane Caro ◽  
Philippe Wenger ◽  
Clément Gosselin
Keyword(s):  
Parallel Manipulator ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Type Synthesis ◽  
Constraint Analysis ◽  
Fixed Direction ◽  
Geometric Singularity ◽  
Grassmann Geometry ◽  
Grassmann Cayley Algebra

This paper deals with the singularity analysis of parallel manipulators with identical limb structures performing Schönflies motions, namely, three independent translations and one rotation about an axis of fixed direction (3T1R). Eleven architectures obtained from a recent type synthesis of such manipulators are analyzed. The constraint analysis shows that these architectures are all overconstrained and share some common properties between the actuation and the constraint wrenches. The singularities of such manipulators are examined through the singularity analysis of the 4-RUU parallel manipulator. A wrench graph representing the constraint wrenches and the actuation forces of the manipulator is introduced to formulate its superbracket. Grassmann–Cayley Algebra is used to obtain geometric singularity conditions. Based on the concept of wrench graph, Grassmann geometry is used to show the rank deficiency of the Jacobian matrix for the singularity conditions. Finally, this paper shows the general aspect of the obtained singularity conditions and their validity for 3T1R parallel manipulators with identical limb structures.

Sign in / Sign up

Export Citation Format

Share Document