scholarly journals A retinal image sharpness metric based on histogram of edge width

2017 ◽  
Vol 11 (3) ◽  
pp. 292-300 ◽  
Author(s):  
Jia-Wen Lin ◽  
Qian Weng ◽  
Lan-Yan Xue ◽  
Xin-Rong Cao ◽  
Lun Yu
Keyword(s):  
Diabetic Retinopathy ◽  
Computational Complexity ◽  
Edge Detection ◽  
Retinal Image ◽  
Quality Evaluation ◽  
Region Of Interest ◽  
Fundus Image ◽  
Image Sharpness ◽  
Low Computational Complexity ◽  
Sharpness Metric

Retinal image sharpness assessment is one of the critical requirements of automatic quality evaluation in telemedicine screening for diabetic retinopathy. In this paper, a new sharpness metric measuring the spread of edges is presented to quantify fundus image clarity. After edge detection on the region of interest of retinal image, the width of each edge is calculated and the histogram of region of interest generated. Based on the histogram, a distance-based factor is introduced to gain the weighted edge width, which is defined as the sharpness metric for the fundus image. The method was tested on Messidor dataset and a proprietary dataset. The results show that the proposed metric performs well over different image distortion levels and resolutions and is of low computational complexity. The weighted edge width value of gradable retinal image, which is irrelevant to resolution, is always within the range of 3–7 pixels.

scholarly journals A No-Reference Sharpness Metric Based on Structured Ringing for JPEG2000 Images

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Zhipeng Cao ◽  
Zhenzhong Wei ◽  
Guangjun Zhang
Keyword(s):  
Edge Detection ◽  
Anisotropic Diffusion ◽  
Experimental Results ◽  
Reference Image ◽  
Image Sharpness ◽  
Ringing Artifacts ◽  
Sharpness Metric ◽  
Sharpness Metrics ◽  
Degraded Images

This work presents a no-reference image sharpness metric based on human blur perception for JPEG2000 compressed image. The metric mainly uses a ringing measure. And a blurring measure is used for compensation when the blur is so severe that ringing artifacts are concealed. We used the anisotropic diffusion for the preliminary ringing map and refined it by considering the property of ringing structure. The ringing detection of the proposed metric does not depend on edge detection, which is suitable for high degraded images. The characteristics of the ringing and blurring measures are analyzed and validated theoretically and experimentally. The performance of the proposed metric is tested and compared with that of some existing JPEG2000 sharpness metrics on three widely used databases. The experimental results show that the proposed metric is accurate and reliable in predicting the sharpness of JPEG2000 images.

scholarly journals Comparative Analysis of Improved of FCM Algorithms in the Segmentation of Retinal Blood Vessels

2022 ◽  
Author(s):  
Imane Mehidi ◽  
Djamel Eddine Chouaib Belkhiat ◽  
Dalel Jabri
Keyword(s):  
Image Segmentation ◽  
Blood Vessels ◽  
Retinal Image ◽  
Color Image ◽  
Region Of Interest ◽  
Retinal Images ◽  
Fundus Image ◽  
Retinal Blood Vessels ◽  
Two Phases ◽  
Retinal Image Segmentation

Abstract The main purpose of identifying and locating the vessels of the retina is to specify the various tissues from the vascular structure of the retina (which could be differencied between wide or tight) of the background of the fundus image. There exist several segmentation techniques that are spreading to divide the retinal vessels, depending on the issues and complexity of the retinal images. Fuzzy c-means is one of the most often used algorithms for retinal image segmentation due to its effectiveness and speed. This paper analyzes the performance of improved FCM algorithms for retinal image segmentation in terms of their ability and capability in segmenting and isolating blood vessels. The process we followed in our paper consists of two phases. Firstly, the pre-processing phase, where the green channel is taken for the color image of the retina. Contrast enhancement is performed through CLAHE , proceeded by applying bottom-hat filtering to bottom-hat filtering is applied with the purpose to define the region of interest. Secondly, in the segmentation phase the obtained image is segmented using FCM algorithms. The algorithms chosen for this study are: FCM, EnFCM, SFCM, FGFCM, FRFCM, DSFCM_N, FCM_SICM and, SSFCM performed on DRIVE and STARE databases. Experiments accomplished on DRIVE and STARE databases demonstrate that the DSFCM_N algorithm achieves better results on the DRIVE database, whereas the FGFCM algorithm provides better results on the STARE database in term of accuracy. Concerning time consumption. The FRFCM algorithm requires less time than other algorithms in the segmentation of retinal images.

Two-Tier Grading System for NPDR Severities of Diabetic Retinopathy in Retinal Fundus Images

2020 ◽  
Vol 14 ◽  
Author(s):  
Charu Bhardwaj ◽  
Shruti Jain ◽  
Meenakshi Sood
Keyword(s):  
Diabetic Retinopathy ◽  
Statistical Analysis ◽  
Early Stage ◽  
Image Feature ◽  
Grading System ◽  
Fundus Images ◽  
Fundus Image ◽  
Retinal Fundus Images ◽  
Retinal Fundus ◽  
Timely Treatment

: Diabetic Retinopathy is the leading cause of vision impairment and its early stage diagnosis relies on regular monitoring and timely treatment for anomalies exhibiting subtle distinction among different severity grades. The existing Diabetic Retinopathy (DR) detection approaches are subjective, laborious and time consuming which can only be carried out by skilled professionals. All the patents related to DR detection and diagnoses applicable for our research problem were revised by the authors. The major limitation in classification of severities lies in poor discrimination between actual lesions, background noise and other anatomical structures. A robust and computationally efficient Two-Tier DR (2TDR) grading system is proposed in this paper to categorize various DR severities (mild, moderate and severe) present in retinal fundus images. In the proposed 2TDR grading system, input fundus image is subjected to background segmentation and the foreground fundus image is used for anomaly identification followed by GLCM feature extraction forming an image feature set. The novelty of our model lies in the exhaustive statistical analysis of extracted feature set to obtain optimal reduced image feature set employed further for classification. Classification outcomes are obtained for both extracted as well as reduced feature set to validate the significance of statistical analysis in severity classification and grading. For single tier classification stage, the proposed system achieves an overall accuracy of 100% by k- Nearest Neighbour (kNN) and Artificial Neural Network (ANN) classifier. In second tier classification stage an overall accuracy of 95.3% with kNN and 98.0% with ANN is achieved for all stages utilizing optimal reduced feature set. 2TDR system demonstrates overall improvement in classification performance by 2% and 6% for kNN and ANN respectively after feature set reduction, and also outperforms the accuracy obtained by other state of the art methods when applied to the MESSIDOR dataset. This application oriented work aids in accurate DR classification for effective diagnosis and timely treatment of severe retinal ailment.

scholarly journals Cut-Edge Detection Method for Rice Harvesting Based on Machine Vision

Agronomy ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 590
Author(s):  
Zhenqian Zhang ◽  
Ruyue Cao ◽  
Cheng Peng ◽  
Renjie Liu ◽  
Yifan Sun ◽  
...  
Keyword(s):  
Machine Vision ◽  
Edge Detection ◽  
Detection Method ◽  
Region Of Interest ◽  
Average Error ◽  
Vertical Projection ◽  
Cut Edge ◽  
Fitting Method ◽  
Combine Harvester ◽  
Edge Detection Method

A cut-edge detection method based on machine vision was developed for obtaining the navigation path of a combine harvester. First, the Cr component in the YCbCr color model was selected as the grayscale feature factor. Then, by detecting the end of the crop row, judging the target demarcation and getting the feature points, the region of interest (ROI) was automatically gained. Subsequently, the vertical projection was applied to reduce the noise. All the points in the ROI were calculated, and a dividing point was found in each row. The hierarchical clustering method was used to extract the outliers. At last, the polynomial fitting method was used to acquire the straight or curved cut-edge. The results gained from the samples showed that the average error for locating the cut-edge was 2.84 cm. The method was capable of providing support for the automatic navigation of a combine harvester.

Sign in / Sign up

Export Citation Format

Share Document