Abrasive Wear Behavious of Iron Based Hard Serfacing Alloy Coatings Developed by Welding

This paper focuses on the influence of hardmetal reinforcement amount, shape and size on the abrasive wear resistance of composite iron self-fluxing alloy (FeCrSiB) based hardfacings produced by the powder metallurgy (PM) technology. First, the size of the reinforcement (1 – 2.5 mm) was fixed, but its shape (angular or spherical) and amount (0 – 50 vol%) were varied. Then the reinforcement shape (angular) and amount (50 vol%) were kept constant, while its size (0.16 – 0.315 mm fine reinforcement and 1 – 2.5 mm coarse reinforcement) and proportion of fine and coarse reinforcement (all fine, all coarse, half fine-half coarse) were varied. ASTM G65 abrasive rubber wheel wear test was applied to find out the wear resistance of the hardfacings; an unreinforced self-luxing alloy (FeCrSiB) hardfacing was the reference material. Volumetric wear rate was calculated according to the weight loss. Worn surfaces were studied under scanning electron microscope. As a result, an optimal composition of the hardmetal containing Fe-based hardfacings based on the reinforcement amount (vol%), shape (irregular or spherical) and size (fine or coarse) is given.

Download Full-text

Impact-abrasive wear of martensitic steels and complex iron-based hardfacing alloys

Wear ◽

10.1016/j.wear.2021.204183 ◽

2021 ◽

pp. 204183

Author(s):

H. Rojacz ◽

C. Katsich ◽

M. Kirchgaßner ◽

R. Kirchmayer ◽

E. Badisch

Keyword(s):

Abrasive Wear ◽

Martensitic Steels ◽

Iron Based

Download Full-text

High performance abrasive wear behavior of cemented carbide rods reinforced iron-based composite by synergistic effects of reinforcement and matrix

Materials Research Express ◽

10.1088/2053-1591/aadded ◽

2018 ◽

Vol 5 (11) ◽

pp. 116522

Author(s):

Xinba Yaer ◽

Aodun Qiqige ◽

Bo Wen ◽

Xiujun Zhang ◽

Mingjian Zhang ◽

...

Keyword(s):

Abrasive Wear ◽

High Performance ◽

Wear Behavior ◽

Synergistic Effects ◽

Cemented Carbide ◽

Abrasive Wear Behavior ◽

Iron Based

Download Full-text

Principles for developing grinding media with increased wear resistance. Part 1. Abrasive wear resistance of iron-based alloys

Journal of Friction and Wear ◽

10.3103/s1068366612010072 ◽

2012 ◽

Vol 33 (1) ◽

pp. 39-46 ◽

Cited By ~ 12

Author(s):

A. D. Koval’ ◽

V. G. Efremenko ◽

M. N. Brykov ◽

M. I. Andrushchenko ◽

R. A. Kulikovskii ◽

...

Keyword(s):

Wear Resistance ◽

Abrasive Wear ◽

Abrasive Wear Resistance ◽

Grinding Media ◽

Iron Based

Download Full-text

Evaluation of the properties and structure of nanocrystalline surface layers in relation to selected constructional materials resistant to abrasive wear

Welding Technology Review ◽

10.26628/wtr.v90i9.948 ◽

2018 ◽

Vol 90 (9) ◽

Cited By ~ 1

Author(s):

Jacek Górka ◽

Artur Czuprynski ◽

Marcin Adamiak ◽

Adam Kopyść

Keyword(s):

Reference Material ◽

Abrasive Wear ◽

Arc Welding ◽

Construction Materials ◽

Resistant Steel ◽

Surface Layers ◽

Metallographic Examination ◽

Welding Method ◽

Metal Arc Welding ◽

Iron Based

The present paper is the result of the investigations of the properties and structure of nanocrystalline layers deposited from iron-based nanoalloy on steel S355N substrate by manual metal arc welding method (MMA) compared to selected abrasion-resistant construction materials currently used in industry. The resultant deposit welds were subjected to macro and microscopic metallographic examination. Working properties of obtained nanocrystalline deposits weld compared to currently used materials were evaluated based on the hardness, abrasive wear of metal-to-mineral. The results of deposits weld working properties measurements were compared with property of wear resistant steel HARDOX 400 type used as reference material.

Download Full-text

Influence of the Pore Characteristics on Mechanical Properties and Abrasive Wear of Sintered Iron-Based Alloys Subjected to a Thermochemical Treatment

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.1143.97 ◽

2017 ◽

Vol 1143 ◽

pp. 97-102 ◽

Cited By ~ 1

Author(s):

Mihaela Marin ◽

Florentina Potecaşu ◽

Octavian Potecaşu ◽

Florin Bogdan Marin

Keyword(s):

Mechanical Properties ◽

Abrasive Wear ◽

Fluidized Bed ◽

Thermochemical Treatment ◽

Microstructural Characterization ◽

Zinc Stearate ◽

Microstructural Characteristics ◽

Pore Characteristics ◽

Sintered Iron ◽

Iron Based

The aim of this paper is to analyse the effect of the pore morphology on microstructural characteristics, mechanical properties and abrasive wear resistance of iron-based alloys subjected to a thermochemical treatment as carburizing in fluidized bed. The starting materials studied in this paper are represented by pre-alloyed iron base powder obtained by powder metallurgy (P/M) route. The powders were produced by water atomization with different particle sizes (< 45, 45-63, 63-100, 100-150, >150 μm). The raw powders have been mixed with 1% zinc stearate as lubricant and uniaxially compacted into cylindrical specimens at room temperature at 600 MPa. The disc dimensions are 8 6 mm. The green compacts were sintered at 1.150 °C for 90 minutes in a laboratory furnnace. After sintering, a thermochemical treatment was applied. The parameters for the carburizinng in fluidized bed are: temperature of 930 °C and time of 45 minutes. The microstructural characterization was carried out using optical microscopy. The porosity of studied samples were analyzed acording to their microstructural characteristics and chemical composition. The mechanical properties and abrasive wear of the sintered and thermochemical treated samples were evaluated. A correlation between porosity, mechanical properties and abrasive wear was established.

Download Full-text