Platelet Birth.

Blood ◽  
2008 ◽  
Vol 112 (11) ◽  
pp. sci-39-sci-39
Author(s):  
Elisabeth Cramer-Bordé ◽  
Ian M. Morison ◽  
Claude Capron ◽  
Claire Dunois-Lardé ◽  
Dominique Baruch

Abstract How and where human platelets get born are two questions still harboring great mystery. In vivo and in vitro approaches have contributed to a better understanding of the phenomenon. The recent study of a family with congenital autosomal-dominant thrombocytopenia showed ectopic platelet release in the bone marrow of the affected individuals. Further, molecular studies identified a new mutation in the gene encoding cytochrome c, which yields a cytochrome c with enhanced apoptotic activity. It is known that platelet birth occurs when megakaryocytes (MKs) undergo compartmentalized apoptotic activity. In this family case, enhanced apoptosis in MKs led to the premature release of platelets in the bone marrow, preventing their natural birth into the circulation after MK migration and causing thrombocytopenia. A similar finding, i.e., platelet birth in the marrow, was made in Wiskott Aldrich syndrome, providing a pathophysiological explanation for the thrombocytopenia, related to impaired migration capacities of MKs upon SDF chemotaxis. Indeed, direct platelet delivery in the human bone marrow space is not currently observed. However, maturing MKs are located close to the marrow sinusoids whose barrier they are able to cross, and entire MKs have been seen in the circulating blood where they become exposed to circulatory shear forces. Since the rate of platelet shedding in culture systems is remarkably low, we hypothesised that a missing element for efficient platelet production in static culture systems would be shear stress. Thus, we exposed human MKs, cultured in vitro until full maturation, to a substrate of matrix protein and high shear rates equivalent to those encountered in capillaries and small arteries. Cells were observed by real-time videomicroscopy, immunofluorescence, and electron microscopy. Shear forces specifically induced a sequence of morphological changes, converting mature MKs into proplatelets, and platelets, which consistently detached from the mother cells into the flow,, at a rate 20 times higher than static culture conditions. Using specific antibody inhibition, we showed the major involvement of GPIb in platelet formation, since its blockade inhibited MK adhesion and subsequent platelet formation. In addition, aIIbb3 was essential for firm MK anchorage, which was required for subsequent platelet formation. These experiments show that MK exposure to high shear rates promotes platelet production via GPIb (and secondarily aIIbb3) interactions with vascular matrix proteins. In conclusion, the above studies converge to present evidence that platelet birth takes place in circulating blood, being regulated by the migratory and apoptotic capacities of MKs and dependent on GPIb and hemodynamic forces.

Blood ◽  
2009 ◽  
Vol 114 (9) ◽  
pp. 1875-1883 ◽  
Author(s):  
Claire Dunois-Lardé ◽  
Claude Capron ◽  
Serge Fichelson ◽  
Thomas Bauer ◽  
Elisabeth Cramer-Bordé ◽  
...  

Abstract Platelets originate from megakaryocytes (MKs) by cytoplasmic elongation into proplatelets. Direct platelet release is not seen in bone marrow hematopoietic islands. It was suggested that proplatelet fragmentation into platelets can occur intravascularly, yet evidence of its dependence on hydrodynamic forces is missing. Therefore, we investigated whether platelet production from MKs could be up-regulated by circulatory forces. Human mature MKs were perfused at a high shear rate on von Willebrand factor. Cells were observed in real time by videomicroscopy, and by confocal and electron microscopy after fixation. Dramatic cellular modifications followed exposure to high shear rates: 30% to 45% adherent MKs were converted into proplatelets and released platelets within 20 minutes, contrary to static conditions that required several hours, often without platelet release. Tubulin was present in elongated proplatelets and platelets, thus ruling out membrane tethers. By using inhibitors, we demonstrated the fundamental roles of microtubule assembly and MK receptor GPIb. Secretory granules were present along the proplatelet shafts and in shed platelets, as shown by P-selectin labeling. Platelets generated in vitro were functional since they responded to thrombin by P-selectin expression and cytoskeletal reorganization. In conclusion, MK exposure to high shear rates promotes platelet production via GPIb, depending on microtubule assembly and elongation.


2002 ◽  
Vol 25 (4) ◽  
pp. 306-312 ◽  
Author(s):  
S. Klaus ◽  
S. Körfer ◽  
K. Mottaghy ◽  
H. Reul ◽  
B. Glasmacher

Devices for modern heart support are minimized to reduce priming blood volume and contact area with foreign surfaces. Their flow fields are partly governed by very high velocity gradients. In order to investigate blood damage, porcine and human blood was passed through a narrow Couette type shear gap applying defined high shear rates within the typical range for devices such as blood pumps or artificial heart valves (γ = 1800/s to 110,000/s for 400 ms). Traumatization profiles of both blood species were recorded in terms of hemolysis and platelet count. Sublethal damage in terms of platelet (PF4) and complement activation (C5a) was additionally measured for human blood. Results for porcine and human blood were very similar. Hemolysis was not started until critical shear rates of about 80,000/s. Impact on platelets was severe with drops in cell count of up to 65% (at γ = 55,000/s to 110,000/s) likely to set stronger limits to the design layout of devices than hemolysis. Concentrations of PF4 and C5a clearly increased with shear rate exhibiting stronger gradients where hemolysis started. Due to the similar results of porcine and human blood for hemolysis and platelet drop, porcine blood seems to be suitable for device testing. Selection of blood species would thus depend on handling, availability and analysis demands.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Britt J. M. van Rooij ◽  
Gábor Závodszky ◽  
Alfons G. Hoekstra ◽  
David N. Ku

Abstract Occlusive thrombi formed under high flow shear rates develop very rapidly in arteries and may lead to myocardial infarction or stroke. Rapid platelet accumulation (RPA) and occlusion of platelet-rich thrombi and clot shrinkage have been studied after flow arrest. However, the influence of margination and shear rate on occlusive clot formation is not fully understood yet. In this study, the influence of flow on the growth and shrinkage of a clot is investigated. Whole blood (WB) and platelet-rich plasma (PRP) were perfused at high shear rates (> 3,000 s−1) through two microfluidic systems with a stenotic section under constant pressure. The stenotic section of the two devices are different in stenotic length (1,000 vs 150 μm) and contraction angle of the stenosis (15° vs 80°). In all experiments, the flow chamber occluded in the stenotic section. Besides a significantly increased lag time and decreased RPA rate for PRP compared to WB (p < 0.01), the device with a shorter stenotic section and steeper contraction angle showed a shear-dependent occlusion and lag time for both PRP and WB. This shear-dependent behavior of the platelet aggregate formation might be caused by the stenotic geometry.


1976 ◽  
Vol 98 (3) ◽  
pp. 488-493 ◽  
Author(s):  
Thomas H. Reif ◽  
Robert M. Nerem ◽  
Francis A. Kulacki

The effect of high wall shear rates on the uptake of 131I-albumin by the arterial wall has been studied in vitro using common carotid arteries excised from anesthetized dogs and perfused with a steady state flow of homologous serum. Wall uptake was found to depend nearly linearly upon wall shear rate. The overall transport of 131I-albumin from the perfusing fluid to the vessel wall appears to be rate controlled by a shear dependent fluid-wall interface process. This study was carried out at high shear rates for flows which were transitional and turbulent. Because of the complexity of such flows, direct measurements of pressure drop were used to determine the shear rate at the vessel wall. Simultaneous pressure drop and flow measurements allowed the determination of the friction factor as a function of Reynolds number; results obtained at the higher Reynolds numbers correspond to those for a rigid pipe with a relative roughness of 0.05.


2019 ◽  
Vol 16 (159) ◽  
pp. 20190148 ◽  
Author(s):  
B. J. M. van Rooij ◽  
G. Závodszky ◽  
V. W. Azizi Tarksalooyeh ◽  
A. G. Hoekstra

Computer simulations were performed to study the transport of red blood cells and platelets in high shear flows, mimicking earlier published in vitro experiments in microfluidic devices with high affinity for platelet aggregate formation. The goal is to understand and predict where thrombus formation starts. Additionally, the need of cell-based modelling in these microfluidic devices is demonstrated by comparing our results with macroscopic models, wherein blood is modelled as a continuous fluid. Hemocell, a cell-based blood flow simulation framework is used to investigate the transport physics in the microfluidic devices. The simulations show an enlarged cell-depleted layer at the site where a platelet aggregate forms in the experiments. In this enlarged cell-depleted layer, the probability to find a platelet is higher than in the rest of the microfluidic device. In addition, the shear rates are sufficiently high to allow for the von Willebrand factor to elongate in this region. We hypothesize that the enlarged cell-depleted layer combined with a sufficiently large platelet flux and sufficiently high shear rates result in an haemodynamic environment that is a preferred location for initial platelet aggregation.


Author(s):  
Zixiang Leonardo Liu ◽  
Christopher Bresette ◽  
Cyrus K Aidun ◽  
David N Ku

Shear-Induced Platelet Aggregation (SIPA) occurs under elevated shear rates (~10000 s-1) found in stenotic coronary and carotid arteries. The pathologically high-shear environment can lead to occlusive thrombosis by SIPA from the interaction of nonactivated platelets and von Willebrand factor (VWF) via glycoprotein Ib (GPIb)-A1 binding. This process under high shear rates is difficult to visualize experimentally with concurrent molecular- and cellular-resolutions. To understand this fast bonding, we employ a validated multiscale in-silico model incorporating measured molecular kinetics and a thrombosis-on-a-chip device to delineate the flow-mediated biophysics of VWF and platelets assembly into mural micro-thrombi. We show that SIPA begins with VWF elongation, followed by agglomeration of platelets in the flow by soluble VWF entanglement before mural capture of the agglomerate by immobilized VWF. The entire SIPA process occurs on the order of 10 ms with the agglomerate travelling a lag distance of a few hundred microns before capture, matching in vitro results. Increasing soluble VWF concentration by ~20x in silico leads to a 2~3x increase in SIPA rates, matching the increase in occlusion rates found in vitro. The morphology of mural aggregates is primarily controlled by VWF molecular weight (length), where normal-length VWF leads to cluster or elongated aggregates and ultra-long VWF leads to loose aggregates seen by others' experiments. Finally, we present phase diagrams of SIPA which provides biomechanistic rationales for a variety of thrombotic and hemostatic events in terms of platelet agglomeration and capture.


1997 ◽  
Vol 17 (5) ◽  
pp. 919-924 ◽  
Author(s):  
Patrick André ◽  
Patricia Hainaud ◽  
Claire Bal dit Sollier ◽  
Leonard I. Garfinkel ◽  
Jacques P. Caen ◽  
...  

Open Ceramics ◽  
2021 ◽  
Vol 5 ◽  
pp. 100052
Author(s):  
V. Carnicer ◽  
C. Alcázar ◽  
M.J. Orts ◽  
E. Sánchez ◽  
R. Moreno

Blood ◽  
1987 ◽  
Vol 69 (2) ◽  
pp. 522-528 ◽  
Author(s):  
M Tong ◽  
P Seth ◽  
DG Penington

Abstract The process of platelet formation by the fragmentation of megakaryocyte pseudopodia, termed proplatelets, demonstrable in the marrow sinusoids is poorly understood. “Stress” platelets produced under conditions of stimulated platelet production differ from normal circulating platelets with respect to volume and a number of functional characteristics. To clarify the relationship of stress platelets to proplatelets, rats were injected with heterologous platelet antiserum. Nondiscoid platelet forms, some characteristically beaded in appearance, strongly resembling bone marrow proplatelets, can be recovered in the circulation of normal rats. During the early period of recovery from acute thrombocytopenia, there was a substantial increase in the proportion of these elongated platelets in the citrated platelet rich plasma. Exposure to EDTA rendered them spherical. Circulating proplatelets may contribute significantly to the prompt increase in platelet volume during recovery from acute thrombocytopenia at a time prior to significant increase in megakaryocyte size and ploidy.


1991 ◽  
Vol 35 (4) ◽  
pp. 706-706
Author(s):  
Hideroh Takahashi ◽  
Yoshinori Inoue ◽  
Satoru Yamamoto ◽  
Osami Kamigaito

Sign in / Sign up

Export Citation Format

Share Document