scholarly journals Elucidating the role of ferrous ion cocatalyst in enhancing dilute acid pretreatment of lignocellulosic biomass

2011 ◽  
Vol 4 (1) ◽  
pp. 48 ◽  
Author(s):  
Hui Wei ◽  
Bryon S Donohoe ◽  
Todd B Vinzant ◽  
Peter N Ciesielski ◽  
Wei Wang ◽  
...  
Molecules ◽  
2020 ◽  
Vol 25 (6) ◽  
pp. 1427
Author(s):  
Hui Wei ◽  
Wei Wang ◽  
Peter N. Ciesielski ◽  
Bryon S. Donohoe ◽  
Min Zhang ◽  
...  

Ferrous ion co-catalyst enhancement of dilute-acid (DA) pretreatment of biomass is a promising technology for increasing the release of sugars from recalcitrant lignocellulosic biomass. However, due to the reductive status of ferrous ion and its susceptibility to oxidation with exposure to atmosphere, its effective application presumably requires anaerobic aqueous conditions created by nitrogen gas-purging, which adds extra costs. The objective of this study was to assess the effectiveness of oxidative iron ion, (i.e., ferric ion) as a co-catalyst in DA pretreatment of biomass, using an anaerobic chamber to strictly control exposure to oxygen during setup and post-pretreatment analyses. Remarkably, the ferric ions were found to be as efficient as ferrous ions in enhancing sugar release during DA pretreatment of biomass, which may be attributed to the observation that a major portion of the initial ferric ions were converted to ferrous during pretreatment. Furthermore, the detection of hydrogen peroxide in the liquors after DA/Fe ion pretreatment suggests that Fenton reaction chemistry was likely involved in DA/Fe ion pretreatments of biomass, contributing to the observed ferric and ferrous interchanges during pretreatment. These results help define the extent and specification requirements for applying iron ions as co-catalysts in DA pretreatments of biomass.


2012 ◽  
Vol 503-504 ◽  
pp. 190-193
Author(s):  
Jing Jing Zhao ◽  
Hai Yan Yang ◽  
Bo Li ◽  
Fu Ming Chen

Sulfite pretreatment was explored in enzymatic hydrolysis of bagasse for the first time, and was compared with dilute acid pretreatment. The results showed that enzymatic hydrolysis yield of bagasse after sulfite treatment was lower than that of the bagasse pretreated with dilute acid. Meanwhile, complexity of sulfite pretreatment and its high cost made it infeasible for industrialized production. Results also showed positive correlation of bagasse pretreatment weight loss to enzymatic hydrolysis yield in dilute acid pretreatment processes, which made substrate weight loss a plausible parameter in pretreatment evaluation.


2017 ◽  
Vol 245 ◽  
pp. 419-425 ◽  
Author(s):  
Xu Yan ◽  
Zhongren Wang ◽  
Kejing Zhang ◽  
Mengying Si ◽  
Mingren Liu ◽  
...  

2020 ◽  
Vol 10 (16) ◽  
pp. 5472 ◽  
Author(s):  
Youjie Xu ◽  
Jun Li ◽  
Zhanguo Xin ◽  
Scott R. Bean ◽  
Michael Tilley ◽  
...  

Chemical composition of biomass, especially carbohydrate content, is a critical indicator of a biomass source’s potential for biofuel applications. This study characterized physico-chemical properties of stalks from 16 representative pedigreed sorghum mutant lines. The objectives of this study were to evaluate the recovery of sucrose and its hydrolysis products, glucose and fructose, during dilute sulfuric acid pretreatment at conditions typically used for lignocellulosic biomass, and to determine the relationship between water-extractive contents and sugar recovery after pretreatment. Dilute acid-pretreated sorghum stalks had enzymatic saccharification of >82.4% glucose yield for all treated samples with more than 82.3% cellulose recovery and 85% hemicellulose removal. A single-step, one-pot process was recommended for sorghum mutant stalks with low water-extractive content (<35%, w/w) to reduce processing cost and minimize wastewater disposal since the majority of sugars will be recovered after dilute acid pretreatment with minimal degradation products. However, for sorghum mutant stalks with high water-extractive content (>35%, w/w), a pre-washing step is beneficial to recover the water-soluble sugars before subjecting to the pretreatment process in order to avoid sugar losses during the pretreatment stage. Thus, different processing technologies should be applied to lignocellulosic biomass with various water-extractive contents and water-soluble sugar concentrations.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Chandan Kundu ◽  
Shanthi Priya Samudrala ◽  
Mahmud Arman Kibria ◽  
Sankar Bhattacharya

AbstractLignocellulosic biomass is an attractive renewable resource to produce biofuel or platform chemicals. Efficient and cost-effective conversion systems of lignocellulosic biomass depend on their appropriate pretreatment processes. Alkali or dilute acid pretreatment of biomass requires a high temperature (> 150 °C) to remove xylan (hemicellulosic sugar) and lignin partially. In this study, peracetic acid was used to pretreat biomass feedstocks, including hardwood and softwood species. It was found that the thermally-assisted dilute acid pretreatment of biomass conducted under the mild temperature of 90 °C up to 5 h resulted in the effective removal of lignin from the biomass with a negligible loss of carbohydrates. This thermally-assisted pretreatment achieved 90% of delignification, and this result was compared with the microwave-assisted pretreatment method. In addition, the crystallinity index (CrI), surface morphology, and chemical structure were significantly changed after the acid pretreatment. The biomass digestibility increased significantly with increased reaction time, by 32% and 23% for hardwood and softwood, respectively. From this study, it is clear that peracetic acid pretreatment is an effective method to enrich glucan content in biomass by delignification.


Sign in / Sign up

Export Citation Format

Share Document