Molecular dynamics (MD) simulation, like other simulation techniques, such as the finite difference method (FDM), or the finite element method (FEM) can play a significant role in addressing a number of machining problems at the atomic scale. It may be noted that atomic simulations are providing new data and exciting insights into various manufacturing processes and tribological phenomenon that cannot be obtained readily in any other way—theory, or experiment. In this paper, the principles of MD simulation, relative advantages and current limitations, and its application to a range of machining problems are reviewed. Machining problems addressed include: (a) the mechanics of nanometric cutting of non-ferrous materials, such as copper and aluminium; (b) the mechanics of nanometric cutting of semiconductor materials, such as silicon and germanium; (c) the effect of various process parameters, including rake angle, edge radius and depth of cut on cutting and thrust forces, specific force ratio, energy, and subsurface deformation of the machined surface; the objective is the development of a process that is more efficient and effective in minimizing the surface or subsurface damage; (d) modelling of the exit failures in various work materials which cause burr formation in machining; (e) simulation of work materials with known defect structure, such as voids, grain boundaries, second phase particles; shape, size and density of these defects can be varied using MD simulation as well as statistical mechanical or Monte Carlo approaches; (f) nanometric cutting of nanostructures; (g) investigation of the nanometric cutting of work materials of known crystallographic orientation; (h) relative hardness of the tool material with respect to the work material in cutting; a range of hardness values from the tool being softer than the work material to the tool being several times harder than the work material is considered; and (i) the tool wear in nanometric cutting of iron with a diamond tool. The nature of deformation in the work material ahead of the tool, subsurface deformation, nature of variation of the forces and their ratio, and specific energy with cutting conditions are investigated by this method.
Crystal Orientation Effect on the Subsurface Deformation of Monocrystalline Germanium in Nanometric Cutting
