scholarly journals Efficacy of a semirigid ankle brace in reducing mechanical ankle instability evaluated by 3D stress-MRI

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Helge Eberbach ◽  
Dominic Gehring ◽  
Thomas Lange ◽  
Spartak Ovsepyan ◽  
Albert Gollhofer ◽  
...  
Keyword(s):  
Contact Area ◽  
Ankle Instability ◽  
Axial Loading ◽  
Mechanical Effect ◽  
Neutral Position ◽  
Mechanical Instability ◽  
Joint Congruency ◽  
Ankle Arthrometer ◽  
Ankle Brace ◽  
Stabilizing Effect

Abstract Background Novel imaging technologies like 3D stress-MRI of the ankle allow a quantification of the mechanical instability contributing to chronic ankle instability. In the present study, we have tested the efficacy of a semirigid ankle brace on joint congruency in a plantarflexion/supination position with and without load. Methods In this controlled observational study of n = 25 patients suffering from mechanical ankle instability, a custom-built ankle arthrometer implementing a novel 3D-stress MRI technique was used to evaluate the stabilizing effect of an ankle brace. Three parameters of joint congruency (i.e., 3D cartilage contact area fibulotalar, tibiotalar horizontal and tibiotalar vertical) were measured. The loss of cartilage contact area from neutral position to a position combined of 40° of plantarflexion and 30° of supination without and with axial load of 200 N was calculated. A semirigid ankle brace was applied in plantarflexion/supination to evaluate its effect on joint congruence. Furthermore, the perceived stability of the brace during a hopping task was analyzed using visual analogue scale (VAS). Results The application of a semirigid brace led to an increase in cartilage contact area (CCA) when the foot was placed in plantarflexion and supination. This effect was visible for all three compartments of the upper ankle joint (P < 0.001; η2 = 0.54). The effect of axial loading did not result in significant differences. The subjective stability provided by the brace (VAS 7.6/10) did not correlate to the magnitude of the improvement of the overall joint congruency. Conclusions The stabilizing effect of the semirigid ankle brace can be verified using 3D stress-MRI. Providing better joint congruency with an ankle brace may reduce peak loads at certain areas of the talus, which possibly cause osteochondral or degenerative lesions. However, the perceived stability provided by the brace does not seem to reflect into the mechanical effect of the brace. Trial registration The study protocol was prospectively registered at the German Clinical Trials Register (#DRKS00016356).

scholarly journals Invisible Injuries in Ankle Fractures

2017 ◽  
Vol 2 (3) ◽  
pp. 2473011417S0001
Author(s):  
Robin Blom ◽  
Markus Knupp ◽  
Beat Hintermann ◽  
Sjoerd Stufkens
Keyword(s):  
Ankle Instability ◽  
External Rotation ◽  
Plantar Flexion ◽  
Axial Loading ◽  
Ankle Fractures ◽  
Deltoid Ligament ◽  
Neutral Position ◽  
Need For Treatment ◽  
Ligament Rupture ◽  
Fresh Frozen

Category: Ankle, Trauma, Biomechanical Introduction/Purpose: Ankle fractures are often associated with ligamentous injuries of the distal tibiofibular syndesmosis, the deltoid ligament and are predictive of ankle instability, early joint degeneration and long-term ankle dysfunction. Detection of ligamentous injuries and the need for treatment remain subject of ongoing debate. In the classic article of Boden it was made clear that injuries of the syndesmotic ligaments were of no importance in the absence of a deltoid ligament rupture. Even in the presence of a deltoid ligament rupture, the interosseous membrane withstood lateralization of the fibula in fractures up to 4.5 mm above the ankle joint. Generally, syndesmotic ligamentous injuries are treated operatively by temporary fixation performed with positioning screws. But do syndesmotic injuries need to be treated operatively at all? Methods: The purpose of this biomechanical cadaveric study was to investigate the relative movements of the tibia and fibula, under normal physiological conditions and after sequential sectioning of the syndesmotic ligaments. Ten fresh-frozen below-knee human cadaveric specimens were tested under normal physiological loading conditions. Axial loads of 50 Newton (N) and 700 N were provided in an intact state and after sequential sectioning of the following ligaments: anterior-inferior tibiofibular (AITFL), posterior-inferior tibiofibular (PITFL), interosseous (IOL), and whole deltoid (DL). In each condition the specimens were tested in neutral position, 10 degrees of dorsiflexion, 30 degrees of plantar flexion, 10 degrees of inversion, 5 degrees of eversion, and externally rotated up to 10 Nm torque. Finally, after sectioning of the deltoid ligament, we triangulated Boden’s classic findings with modern instruments. We hypothesized that only after sectioning of the deltoid ligament; the lateralization of the talus will push the fibula away from the tibia. Results: During dorsiflexion and external rotation the ankle syndesmosis widened, and the fibula externally rotated after sequential sectioning of the syndesmotic ligaments. After the AITFL was sectioned the fibula starts rotating externally. However, the external rotation of the fibula significantly reduced when the external rotation torque was combined with axial loading up to 700 N as compared to the external rotation torque alone. The most relative moments between the tibia and fibula were observed after the deltoid ligament was sectioned. Conclusion: Significant increases in movements of the fibula relative to the tibia occur when an external rotation torque is provided. However, axial pressure seemed to limit external rotation because of the bony congruence of the tibiotalar surface. The AITFL is necessary to prevent the fibula to rotate externally when the foot is rotating externally. The deltoid ligament is the main stabilizer of the ankle mortise.

Ankle Joint Pressure in Supination–External Rotation Injuries: A Biomechanical Study in an Unrestrained Cadaver Model

2020 ◽  
pp. 193864002095018
Author(s):  
Andreas C. Fösel ◽  
Angela Seidel ◽  
Marc C. Attinger ◽  
Ivan Zderic ◽  
Boyko Gueorguiev ◽  
...  
Keyword(s):  
Ankle Joint ◽  
Contact Area ◽  
Peak Pressure ◽  
External Rotation ◽  
Axial Loading ◽  
Biomechanical Study ◽  
Deltoid Ligament ◽  
Neutral Position ◽  
Joint Reaction Forces ◽  
Supination External Rotation

Background Previous biomechanical studies simulating supination–external rotation (SER) IV injuries revealed different alterations in contact area and peak pressure. We investigated joint reaction forces and radiographic parameters in an unrestrained, more physiological setup. Methods Twelve lower leg specimens were destabilized stepwise by osteotomy of the fibula (SER II) and transection of the superficial (SER IVa) and the deep deltoid ligament (SER IVb) according to the Lauge-Hansen classification. Sensors in the ankle joint recorded tibio-talar pressure changes with axial loading at 700 N in neutral position, 10° of dorsiflexion, and 20° of plantarflexion. Radiographs were taken for each step. Results Three of 12 specimen collapsed during SER IVb. In the neutral position, the peak pressure and contact area changed insignificantly from 2.6 ± 0.5 mPa (baseline) to 3.0 ± 1.4 mPa (SER IVb) ( P = .35) and from 810 ± 42 mm2 to 735 ± 27 mm2 ( P = .08), respectively. The corresponding medial clear space (MCS) increased significantly from 2.5 ± 0.4 mm (baseline) to 3.9 ± 1.1 mm (SER IVb) ( P = .028). The position of the ankle joint had a decisive effect on contact area ( P = .00), center of force ( P = .00) and MCS ( P = .01). Conclusion Simulated SER IVb injuries demonstrated radiological, but no biomechanical changes. This should be considered for surgical decision making based on MCS width on weightbearing radiographs. Levels of Evidence: Not applicable. Biomechanical study

scholarly journals Clinical evaluation of manual stress testing, stress ultrasound and 3D stress MRI in chronic mechanical ankle instability

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Markus Wenning ◽  
Dominic Gehring ◽  
Thomas Lange ◽  
David Fuerst-Meroth ◽  
Paul Streicher ◽  
...  
Keyword(s):  
Stress Testing ◽  
Ankle Instability ◽  
Tilt Test ◽  
Diagnostic Study ◽  
Mechanical Instability ◽  
Subjective Character ◽  
Balance Test ◽  
Research And Practice ◽  
Cutoff Values ◽  
Patient Reported

Abstract Background Chronic ankle instability (CAI) arises from the two etiological factors of functional (FAI) and mechanical ankle instability (MAI). To distinguish the contributions of the two etiologies, it is necessary to quantitively assess functional and mechanical deficits. Validated and reproducible assessment of mechanical instability remains a challenge in current research and practice. Physical examination, stress sonography and a novel 3D stress MRI have been used, while stress radiography has been called into question and arthrometry is limited to research purposes. The interaction of these primarily mechanical measurements with the functional and subjective components of CAI are subject to debate. The aim of this study was the evaluation of the clinical and biomechanical preferences of the three different methods in the diagnosis of MAI. Methods In this cross-sectional diagnostic study, we compared three different diagnostic approaches to mechanical ankle instability: (1) manual stress testing (anterior drawer test [ADT] and talar tilt test [TTT]), (2) stress sonography and (3) 3D stress MRI (3SAM) The latter includes quantification of 3D cartilage contact area (CCA) in plantarflexion-supination compared to neutral-null position. We applied these measurements to a cohort of patients suffering from chronic mechanical ankle instability (n = 25) to a matched cohort of healthy controls (n = 25). Perceived instability was assessed using the Cumberland Ankle Instability Tool (CAIT) and Forgotten Joint Score (FJS). Functional deficits were measured using postural sway and the y-Balance test. Results Significant differences between the two groups (single-factor “group” ANOVA, p < 0.05) were found in all of the mechanical assessments with strong effect sizes. Spearman’s correlations were strong for CAIT and manual stress testing (TTT rho = − 0.83, ADT rho = − 0.81), 3D stress MRI (rho = − 0.53) and stress sonography (TTT rho = − 0.48, ADT rho = − 0.44). Furthermore, the correlation between manual stress testing and CCA in the fibulotalar articulation (CCAFT) was strong (rho = 0.54) and the correlations to stress sonography were moderate (ADT rho = 0.47 and TTT rho = 0.43). The calculation of cutoff values revealed a distance of > 5.4 mm increase in ligament length during stress sonography (sensitivity 0.92, specificity 0.6) and > 43% loss of articulating surface in the fibulotalar joint (CCAFT in supination-plantarflexion using 3SAM, sensitivity 0.71, specificity 0.8) as potential cutoff values for diagnosing MAI. Conclusions Manual stress testing showed to be a valuable method of identifying mechanical ankle instability. However, due to is subjective character it may overvalue patient-reported instability as a factor which explains the high correlation to the CAIT-score, but this may also reduce its value in diagnosing the isolated mechanical quality of the joint. Thus, there is a persisting need for objective and reproducible alternatives focusing on MAI. According to our results, 3D stress MRI and stress sonography represent valuable alternatives and may be used to quantitively assess mechanical ankle instability in research and practice. Trial registration German Registry of Clinical Trials # DRKS00016356, registered on 05/11/2019.

scholarly journals People with chronic ankle instability benefit from brace application in highly dynamic change of direction movements

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Patrick Fuerst ◽  
Albert Gollhofer ◽  
Markus Wenning ◽  
Dominic Gehring
Keyword(s):  
Ankle Joint ◽  
Repeated Measures ◽  
Ankle Instability ◽  
Dynamic Change ◽  
Chronic Ankle Instability ◽  
Mechanical Resistance ◽  
Healthy Controls ◽  
Neuromuscular Activation ◽  
Ankle Inversion ◽  
Ankle Brace

Abstract Background The application of ankle braces is an effective method for the prevention of recurrent ankle sprains. It has been proposed that the reduction of injury rates is based on the mechanical stiffness of the brace and on beneficial effects on proprioception and neuromuscular activation. Yet, how the neuromuscular system responds to the application of various types of ankle braces during highly dynamic injury-relevant movements is not well understood. Enhanced stability of the ankle joint seems especially important for people with chronic ankle instability. We therefore aimed to analyse the effects of a soft and a semi-rigid ankle brace on the execution of highly dynamic 180° turning movements in participants with and without chronic ankle instability. Methods Fifteen participants with functional ankle instability, 15 participants with functional and mechanical ankle instability and 15 healthy controls performed 180° turning movements in reaction to light signals in a cross-sectional descriptive laboratory study. Ankle joint kinematics and kinetics as well as neuromuscular activation of muscles surrounding the ankle joint were determined. Two-way repeated measures analyses of variance and post-hoc t-tests were calculated. Results Maximum ankle inversion angles and velocities were significantly reduced with the semi-rigid brace in comparison to the conditions without a brace and with the soft brace (p ≤ 0.006, d ≥ 0.303). Effect sizes of these reductions were larger in participants with chronic ankle instability than in healthy controls. Furthermore, peroneal activation levels decreased significantly with the semi-rigid brace in the 100 ms before and after ground contact. No statistically significant brace by group effects were found. Conclusions Based on these findings, we argue that people with ankle instability in particular seem to benefit from a semi-rigid ankle brace, which allows them to keep ankle inversion angles in a range that is comparable to values of healthy people. Lower ankle inversion angles and velocities with a semi-rigid brace may explain reduced injury incidences with brace application. The lack of effect of the soft brace indicates that the primary mechanism behind the reduction of inversion angles and velocities is the mechanical resistance of the brace in the frontal plane.

scholarly journals The fibula and talus position difference in functional and mechanical ankle instability: MRI findings

2021 ◽  
Vol 29 (1) ◽  
pp. 230949902098457
Author(s):  
Chengjie Yuan ◽  
Genrui Zhu ◽  
Zhifeng Wang ◽  
Chen Wang ◽  
Xu Wang ◽  
...  
Keyword(s):  
Healthy Volunteers ◽  
Ankle Instability ◽  
Medial Malleolus ◽  
Mechanical Instability ◽  
Mri Findings ◽  
Functional Instability ◽  
Post Hoc Analysis ◽  
Ankle Stability ◽  
Post Hoc

Purpose: This study aimed to use MRI to evaluate the fibula and talus position difference in functional and mechanical ankle stability patients. Methods: 61 and 68 patients with functional and mechanical instability, and 60 healthy volunteers were involved. Based on the axial MRI images, the rotation of the talus was identified through the Malleolar Talus Index (MTI). The position relative to the talus (Axial Malleolar Index, AMI) and medial malleolus (Intermalleolar Index, IMI) were used to evaluated the displacement of the fibula. Results: Post hoc analysis showed that the values of malleolar talus index was significantly larger among mechanical instability (89.18° ± 2.31°) than that in functional instability patients (86.55° ±61.65°, P < 0.001) and healthy volunteers (85.59° ± 2.42°, P < 0.001). The axial malleolar index of the mechanical instability patients (11.39° ± 1.41°) were significantly larger than healthy volunteers (7.91° ± 0.83°) (P < 0.0001). There were no statistically significant differences in the above three indexes between the functional instability patients and healthy volunteers. Conclusion: The functional instability patients didn’t have a posteriorly positioned fibula and an internally rotated talus. The malleolar talus index was significantly larger among mechanical instability patients than that in functional instability patients. Increased malleolar talus index may become a new indirect MRI sign for identifying functional and mechanical instability patients.

Tibiofemoral Contact Measures During Standing in Toe-In and Toe-Out Postures

2021 ◽  
pp. 1-7
Author(s):  
Michael A. Hunt ◽  
Christopher K. Cochrane ◽  
Andrew M. Schmidt ◽  
Honglin Zhang ◽  
David J. Stockton ◽  
...  
Keyword(s):  
Magnetic Resonance ◽  
Contact Area ◽  
Lateral Compartment ◽  
Neutral Position ◽  
Joint Loading ◽  
Tibiofemoral Joint ◽  
Magnetic Resonance Scanner ◽  
Short And Long Term ◽  
Healthy Participants

Knee osteoarthritis is thought to result, in part, from excessive and unbalanced joint loading. Toe-in and toe-out gait modifications produce alterations in external knee joint moments, and some improvements in pain over the short- and long-term. The aim of this study was to probe mechanisms of altered joint loading through the assessment of tibiofemoral contact in standing with toe-in and toe-out positions using an open magnetic resonance scanner. In this study, 15 young, healthy participants underwent standing magnetic resonance imaging of one of their knees in 3 foot positions. Images were analyzed to determine contact in the tibiofemoral joint, with primary outcomes including centroid of contact and contact area for each compartment and overall. The centroid of contact shifted laterally in the lateral compartment with both toe-in and toe-out postures, compared with the neutral position (P < .01), while contact area in the medial and lateral compartments showed no statistical differences. Findings from this study indicate that changes in the loading anatomy are present in the tibiofemoral joint with toe-in and toe-out and that a small amount of lateralization of contact, especially in the lateral compartment, does occur with these altered lower limb orientations.

Anterior Cruciate Ligament Reconstruction Affects Tibiofemoral Joint Congruency During Dynamic Functional Movement

2018 ◽  
Vol 46 (7) ◽  
pp. 1566-1574 ◽  
Author(s):  
Kanto Nagai ◽  
Tom Gale ◽  
James J. Irrgang ◽  
Scott Tashman ◽  
Freddie H. Fu ◽  
...  
Keyword(s):  
Anterior Cruciate Ligament ◽  
Subchondral Bone ◽  
Contact Area ◽  
Ligament Reconstruction ◽  
Cruciate Ligament ◽  
Lateral Compartment ◽  
Patient Specific ◽  
Cruciate Ligament Reconstruction ◽  
Joint Congruency ◽  
Anterior Cruciate

Background: Anterior cruciate ligament reconstruction (ACLR) has been shown to alter kinematics, which may influence dynamic tibiofemoral joint congruency (a measure of how well the bone surfaces fit together). This may lead to abnormal loading of cartilage and joint degeneration. However, joint congruency after ACLR has never been investigated. Hypotheses: The ACLR knee will be more congruent than the contralateral uninjured knee, and dynamic congruency will increase over time after ACLR. Side-to-side differences (SSD) in dynamic congruency will be related to cartilage contact location/area and subchondral bone curvatures. Study Design: Descriptive laboratory study. Methods: The authors examined 43 patients who underwent unilateral ACLR. At 6 months and 24 months after ACLR, patients performed downhill running on a treadmill while synchronized biplane radiographs were acquired at 150 images per second. Dynamic tibiofemoral kinematic values were determined by use of a validated volumetric model-based tracking process that matched patient-specific bone models, obtained from computed tomography, to biplane radiographs. Patient-specific cartilage models, obtained from magnetic resonance imaging, were registered to tracked bone models and used to calculate dynamic cartilage contact regions. Principle curvatures of the subchondral bone surfaces under each cartilage contact area were calculated to determine joint congruency. Repeated-measures analysis of variance was used to test the differences. Multiple linear regression was used to identify associations between SSD in congruency index, cartilage contact area, contact location, and global curvatures of femoral or tibial subchondral bone. Results: Lateral compartment congruency in the ACLR knee was greater than in the contralateral knee ( P < .001 at 6 months and P = .010 at 24 months). From 6 to 24 months after surgery, dynamic congruency decreased in the medial compartment ( P = .002) and increased in the lateral compartment ( P = .007) in the ACLR knee. In the lateral compartment, SSD in joint congruency was related to contact location and femur global curvature, and in the medial compartment, SSD in joint congruency was related to contact area. Conclusion: ACLR appears to affect dynamic joint congruency. SSD in joint congruency was associated with changes in contact location, contact area, and femoral bony curvature. Clinical Relevance: Alterations in tibiofemoral contact location, contact area, and bone shape affect dynamic joint congruency, potentially contributing to long-term degeneration after ACLR.

scholarly journals The Role of Calcaneofibular Ligament (CFL) Injury in Ankle Instability

2017 ◽  
Vol 2 (3) ◽  
pp. 2473011417S0002
Author(s):  
Kenneth Hunt ◽  
Richard Fuld ◽  
Judas Kelley ◽  
Nicholas Anderson ◽  
Todd Baldini
Keyword(s):  
Contact Mechanics ◽  
Ankle Joint ◽  
Motion Capture ◽  
Contact Area ◽  
Subtalar Joint ◽  
Ankle Instability ◽  
Weight Bearing ◽  
Calcaneofibular Ligament ◽  
Tibiotalar Joint ◽  
Ankle Stability

Category: Ankle Introduction/Purpose: Acute inversion ankle sprains are among the most common musculoskeletal injuries. Higher grade sprains, which include anterior talofibular ligament (ATFL) and calcaneofibular ligament (CFL) injury, can be particularly problematic and often require surgical repair. The implications of CFL injury on ankle instability are unclear. We aim to evaluate the impact of CFL injury on ankle stability and subtalar joint biomechanics. We hypothesized that CFL injury will result in decreased stiffness and torque, and alteration of ankle contact mechanics compared to the uninjured ankle in a cadaveric model. Methods: Twenty matched cadaveric ankles dissected of skin and subcutaneous tissue were mounted to an Instron with 20° of ankle plantar flexion and 15° of internal rotation. Intact specimens were axially loaded to body weight, then underwent inversion stress along the anatomic axis of the ankle from 0 to 20° (simulating inversion injury) for three cycles. ATFL and CFL were sequentially sectioned, and inversion testing repeated for each condition. Stiffness and change in torque were recorded using an Instron, and pressure and contact area were recorded using a calibrated Tekscan sensor system. Inversion angle of the talus and calcaneus relative to the ankle mortise were recorded using a three-dimensional motion capture system. Paired t tests were performed for inter and intra-group comparisons. Results: Stiffness and torque did not significantly decrease after sectioning of the ATFL, but did decreased significantly after sectioning of CFL. Peak pressures in the tibiotalar joint decreased significantly following CFL release compared to both the uninjured ankle and ATFL-only release. Mean contact area significantly increased following CFL release compared to both the uninjured ankle and ATFL release. There was a concentration of force in the anteromedial ankle joint during weight-bearing inversion. However, the center-of-force shifts 1.22 mm posteromedial after CFL release relative to an intact ankle. Motion capture showed a significant and sequential increase in inversion angle of both the calcaneus and talus, after release of each ligament. There was significantly more inversion in the subtalar joint than the tibiotalar joint with weight-bearing inversion. Conclusion: There is significantly lower stiffness and torque with weight-bearing inversion of the ankle joint complex following injury to both ATFL and CFL, and sequentially greater inversion of the talus and calcaneus with progressive ligament injury. This corresponds to a significant shift in the center of force in the tibiotalar joint. CFL contributes considerably to lateral ankle stability, and sprains that include CFL injury result in substantial alteration of contact mechanics at the ankle and subtalar joints. Repair of CFL may be beneficial during lateral ligament reconstruction, potentially mitigating long-term consequences (e.g., articular damage) of a loose or incompetent CFL.

Contact area inside the distal radioulnar joint: Effect of axial loading and position of the forearm

2007 ◽  
Vol 22 (3) ◽  
pp. 313-318 ◽  
Author(s):  
H. Shaaban ◽  
G. Giakas ◽  
M. Bolton ◽  
R. Williams ◽  
P. Wicks ◽  
...  
Keyword(s):  
Contact Area ◽  
Axial Loading ◽  
Distal Radioulnar Joint ◽  
Joint Effect ◽  
Radioulnar Joint

scholarly journals Evaluation of Joint Position Recognition Measurement Variables Associated With Chronic Ankle Instability: A Meta-Analysis

2012 ◽  
Vol 47 (4) ◽  
pp. 444-456 ◽  
Author(s):  
Jennifer M. Medina McKeon ◽  
Patrick O. McKeon
Keyword(s):  
Ankle Instability ◽  
Meta Analysis ◽  
Plantar Flexion ◽  
Absolute Error ◽  
Chronic Ankle Instability ◽  
Effect Sizes ◽  
Control Group ◽  
Neutral Position ◽  
Joint Position ◽  
Standard Deviations

Objective To identify the most precise and consistent variables using joint repositioning for identifying joint position recognition (JPR) deficits in individuals with chronic ankle instability (CAI). Data Sources We conducted a computerized search of the relevant scientific literature from January 1, 1965, to July 31, 2010, using PubMed Central, CINAHL, MEDLINE, SPORTDiscus, and Web of Science. We also conducted hand searches of all retrieved studies to identify relevant citations. Included studies were written in English, involved human participants, and were published in peer-reviewed journals. Study Selection Studies were included in the analysis if the authors (1) had examined JPR deficits in patients with CAI using active or passive repositioning techniques, (2) had made comparisons with a group or contralateral limb without CAI, and (3) had provided means and standard deviations for the calculation of effect sizes. Data Extraction Studies were selected and coded independently and assessed for quality by the investigators. We evaluated 6 JPR variables: (1) study comparisons, (2) starting foot position, (3) repositioning method, (4) testing range of motion, (5) testing velocity, and (6) data-reduction method. The independent variable was group (CAI, control group or side without CAI). The dependent variable was errors committed during joint repositioning. Means and standard deviations for errors committed were extracted from each included study. Data Synthesis Effect sizes and 95% confidence intervals were calculated to make comparisons across studies. Separate meta-analyses were calculated to determine the most precise and consistent method within each variable. Between-groups comparisons that involved active repositioning starting from a neutral position and moving into plantar flexion or inversion at a rate of less than 5°/s as measured by the mean absolute error committed appeared to be the most sensitive and precise variables for detecting JPR deficits in people with CAI.

Sign in / Sign up

Export Citation Format

Share Document