Practical aspects and applications of 2D stereotomography

Geophysics ◽  
2003 ◽  
Vol 68 (3) ◽  
pp. 1008-1021 ◽  
Author(s):  
Frederic Billette ◽  
Soazig Le Bégat ◽  
Pascal Podvin ◽  
Gilles Lambaré
Keyword(s):  
Estimation Method ◽  
Synthetic Data ◽  
Velocity Model ◽  
Velocity Estimation ◽  
Common Source ◽  
Depth Migration ◽  
Reflection Seismic ◽  
Velocity Models ◽  
Automatic Picking ◽  
Iterative Inversion

Stereotomography is a new velocity estimation method. This tomographic approach aims at retrieving subsurface velocities from prestack seismic data. In addition to traveltimes, the slope of locally coherent events are picked simultaneously in common offset, common source, common receiver, and common midpoint gathers. As the picking is realized on locally coherent events, they do not need to be interpreted in terms of reflection on given interfaces, but may represent diffractions or reflections from anywhere in the image. In the high‐frequency approximation, each one of these events corresponds to a ray trajectory in the subsurface. Stereotomography consists of picking and analyzing these events to update both the associated ray paths and velocity model. In this paper, we describe the implementation of two critical features needed to put stereotomography into practice: an automatic picking tool and a robust multiscale iterative inversion technique. Applications to 2D reflection seismic are presented on synthetic data and on a 2D line extracted from a 3D towed streamer survey shot in West Africa for TotalFinaElf. The examples demonstrate that the method requires only minor human intervention and rapidly converges to a geologically plausible velocity model in these two very different and complex velocity regimes. The quality of the velocity models is verified by prestack depth migration results.

Tomographic velocity estimation with plane‐wave synthesis

Geophysics ◽  
1997 ◽  
Vol 62 (6) ◽  
pp. 1825-1838 ◽  
Author(s):  
Jun Ji
Keyword(s):  
Plane Wave ◽  
Synthetic Data ◽  
Velocity Model ◽  
Velocity Estimation ◽  
Velocity Analysis ◽  
Process Measures ◽  
Prestack Migration ◽  
Velocity Models ◽  
Wave Synthesis ◽  
Oriented Plane

In areas with structurally complex geology, tomographic velocity analysis is often required to estimate velocities. In this paper I describe an algorithm for tomographic velocity estimation that uses plane‐wave synthesis imaging as a prestack migration. The classical iterative two‐step process (measures the traveltime errors with the current velocity model and then update the velocity model) is performed as follows. The events are picked in the image space after prestack migration with surface‐oriented plane‐wave synthesis imaging. the traveltime deviations are measured through residual‐moveout (RMO) velocity analysis in common‐surface‐location (CSL) gathers obtained by reflector‐oriented plane‐wave synthesis imaging, and the velocity update is calculated by inverting the traveltime deviations through a conjugate gradient. The results from synthetic data indicate that the tomographic method successfully estimates interval‐velocity models that lead to depth‐migrated images with no residual moveout.

Kinematic interpretation in the prestack depth‐migrated domain

Geophysics ◽  
1997 ◽  
Vol 62 (4) ◽  
pp. 1226-1237 ◽  
Author(s):  
Irina Apostoiu‐Marin ◽  
Andreas Ehinger
Keyword(s):  
Signal To Noise Ratio ◽  
Velocity Model ◽  
Point Of View ◽  
Prestack Depth Migration ◽  
Depth Migration ◽  
Velocity Models ◽  
Time Domain Data ◽  
And Migration ◽  
Point To Point ◽  
Homogeneous Media

Prestack depth migration can be used in the velocity model estimation process if one succeeds in interpreting depth events obtained with erroneous velocity models. The interpretational difficulty arises from the fact that migration with erroneous velocity does not yield the geologically correct reflector geometries and that individual migrated images suffer from poor signal‐to‐noise ratio. Moreover, migrated events may be of considerable complexity and thus hard to identify. In this paper, we examine the influence of wrong velocity models on the output of prestack depth migration in the case of straight reflector and point diffractor data in homogeneous media. To avoid obscuring migration results by artifacts (“smiles”), we use a geometrical technique for modeling and migration yielding a point‐to‐point map from time‐domain data to depth‐domain data. We discover that strong deformation of migrated events may occur even in situations of simple structures and small velocity errors. From a kinematical point of view, we compare the results of common‐shot and common‐offset migration. and we find that common‐offset migration with erroneous velocity models yields less severe image distortion than common‐shot migration. However, for any kind of migration, it is important to use the entire cube of migrated data to consistently interpret in the prestack depth‐migrated domain.

Migration velocity analysis from locally coherent events in 2‐D laterally heterogeneous media, Part I: Theoretical aspects

Geophysics ◽  
2002 ◽  
Vol 67 (4) ◽  
pp. 1202-1212 ◽  
Author(s):  
Hervé Chauris ◽  
Mark S. Noble ◽  
Gilles Lambaré ◽  
Pascal Podvin
Keyword(s):  
Cost Function ◽  
Velocity Model ◽  
Migration Velocity ◽  
Velocity Estimation ◽  
Velocity Analysis ◽  
Seismic Reflection Data ◽  
Velocity Models ◽  
Migration Velocity Analysis ◽  
Paraxial Ray ◽  
The Cost

We present a new method based on migration velocity analysis (MVA) to estimate 2‐D velocity models from seismic reflection data with no assumption on reflector geometry or the background velocity field. Classical approaches using picking on common image gathers (CIGs) must consider continuous events over the whole panel. This interpretive step may be difficult—particularly for applications on real data sets. We propose to overcome the limiting factor by considering locally coherent events. A locally coherent event can be defined whenever the imaged reflectivity locally shows lateral coherency at some location in the image cube. In the prestack depth‐migrated volume obtained for an a priori velocity model, locally coherent events are picked automatically, without interpretation, and are characterized by their positions and slopes (tangent to the event). Even a single locally coherent event has information on the unknown velocity model, carried by the value of the slope measured in the CIG. The velocity is estimated by minimizing these slopes. We first introduce the cost function and explain its physical meaning. The theoretical developments lead to two equivalent expressions of the cost function: one formulated in the depth‐migrated domain on locally coherent events in CIGs and the other in the time domain. We thus establish direct links between different methods devoted to velocity estimation: migration velocity analysis using locally coherent events and slope tomography. We finally explain how to compute the gradient of the cost function using paraxial ray tracing to update the velocity model. Our method provides smooth, inverted velocity models consistent with Kirchhoff‐type migration schemes and requires neither the introduction of interfaces nor the interpretation of continuous events. As for most automatic velocity analysis methods, careful preprocessing must be applied to remove coherent noise such as multiples.

3-D elastic prestack, reverse‐time depth migration

Geophysics ◽  
1994 ◽  
Vol 59 (4) ◽  
pp. 597-609 ◽  
Author(s):  
Wen‐Fong Chang ◽  
George A. McMechan
Keyword(s):  
Finite Differences ◽  
Synthetic Data ◽  
P Wave ◽  
Common Source ◽  
Reverse Time ◽  
Depth Migration ◽  
Full Wave ◽  
Source Data ◽  
Recorded Data ◽  
Time Extrapolation

By combining and extending previous algorithms for 2-D prestack elastic migration and 3-D prestack acoustic migration, a full 3-D elastic prestack depth migration algorithm is developed. Reverse‐time extrapolation of the recorded data is by 3-D elastic finite differences; computation of the image time for each point in the 3-D volume is by 3-D acoustic finite differences. The algorithm operates on three‐component, vector‐wavefield common‐source data and produces three‐component vector reflectivity distributions. Converted P‐to‐S reflections are automatically imaged with the primary P‐wave reflections. There are no dip restrictions as the full wave equation is used. The algorithm is illustrated by application to synthetic data from three models; a flat reflector, a dipping truncated wedge overlying a flat reflector, and the classical French double dome and fault model.

High-resolution seismic velocity analysis by sign-based weighted semblance

Geophysics ◽  
2021 ◽  
pp. 1-35
Author(s):  
M. Javad Khoshnavaz
Keyword(s):  
Seismic Velocity ◽  
Resolution Enhancement ◽  
Synthetic Data ◽  
Correlation Coefficients ◽  
Velocity Model ◽  
Seismic Attenuation ◽  
Velocity Analysis ◽  
Velocity Models ◽  
Amplitude Versus Offset ◽  
Amplitude Versus

Building an accurate velocity model plays a vital role in routine seismic imaging workflows. Normal-moveout-based seismic velocity analysis is a popular method to make the velocity models. However, traditional velocity analysis methodologies are not generally capable of handling amplitude variations across moveout curves, specifically polarity reversals caused by amplitude-versus-offset anomalies. I present a normal-moveout-based velocity analysis approach that circumvents this shortcoming by modifying the conventional semblance function to include polarity and amplitude correction terms computed using correlation coefficients of seismic traces in the velocity analysis scanning window with a reference trace. Thus, the proposed workflow is suitable for any class of amplitude-versus-offset effects. The approach is demonstrated to four synthetic data examples of different conditions and a field data consisting a common-midpoint gather. Lateral resolution enhancement using the proposed workflow is evaluated by comparison between the results from the workflow and the results obtained by the application of conventional semblance and three semblance-based velocity analysis algorithms developed to circumvent the challenges associated with amplitude variations across moveout curves, caused by seismic attenuation and class II amplitude-versus-offset anomalies. According to the obtained results, the proposed workflow is superior to all the presented workflows in handling such anomalies.

Redatuming through a salt canopy and target-oriented salt-flank imaging

Geophysics ◽  
2008 ◽  
Vol 73 (3) ◽  
pp. S63-S71 ◽  
Author(s):  
Rongrong Lu ◽  
Mark Willis ◽  
Xander Campman ◽  
Jonathan Ajo-Franklin ◽  
M. Nafi Toksöz
Keyword(s):  
Velocity Gradient ◽  
Model Building ◽  
Velocity Structure ◽  
Velocity Model ◽  
Seismic Profile ◽  
Velocity Estimation ◽  
Reverse Time ◽  
Estimation Model ◽  
Depth Migration ◽  
Prestack Migration

We describe a new shortcut strategy for imaging the sediments and salt edge around a salt flank through an overburden salt canopy. We tested its performance and capabilities on 2D synthetic acoustic seismic data from a Gulf of Mexico style model. We first redatumed surface shots, using seismic interferometry, from a walkaway vertical seismic profile survey as if the source and receiver pairs had been located in the borehole at the positions of the receivers. This process creates effective downhole shot gathers by completely moving surface shots through the salt canopy, without any knowledge of overburden velocity structure. After redatuming, we can apply multiple passes of prestack migration from the reference datum of the bore-hole. In our example, first-pass migration, using only a simple vertical velocity gradient model, reveals the outline of the salt edge. A second pass of reverse-time, prestack depth migration using full two-way wave equation was performed with an updated velocity model that consisted of the velocity gradient and salt dome. The second-pass migration brings out dipping sediments abutting the salt flank because these reflectors were illuminated by energy that bounced off the salt flank, forming prismatic reflections. In this target-oriented strategy, the computationally fast redatuming process eliminates the need for the traditional complex process of velocity estimation, model building, and iterative depth migration to remove effects of the salt canopy and surrounding overburden. This might allow this strategy to be used in the field in near real time.

Migration moveout analysis and depth focusing

Geophysics ◽  
1993 ◽  
Vol 58 (1) ◽  
pp. 91-100 ◽  
Author(s):  
Claude F. Lafond ◽  
Alan R. Levander
Keyword(s):  
Heterogeneous Media ◽  
A Priori ◽  
Complex Structure ◽  
Tomographic Reconstruction ◽  
Synthetic Data ◽  
Real Data ◽  
Velocity Model ◽  
Velocity Analysis ◽  
Data Set ◽  
Velocity Models

Prestack depth migration still suffers from the problems associated with building appropriate velocity models. The two main after‐migration, before‐stack velocity analysis techniques currently used, depth focusing and residual moveout correction, have found good use in many applications but have also shown their limitations in the case of very complex structures. To address this issue, we have extended the residual moveout analysis technique to the general case of heterogeneous velocity fields and steep dips, while keeping the algorithm robust enough to be of practical use on real data. Our method is not based on analytic expressions for the moveouts and requires no a priori knowledge of the model, but instead uses geometrical ray tracing in heterogeneous media, layer‐stripping migration, and local wavefront analysis to compute residual velocity corrections. These corrections are back projected into the velocity model along raypaths in a way that is similar to tomographic reconstruction. While this approach is more general than existing migration velocity analysis implementations, it is also much more computer intensive and is best used locally around a particularly complex structure. We demonstrate the technique using synthetic data from a model with strong velocity gradients and then apply it to a marine data set to improve the positioning of a major fault.

Velocity estimation by beam stack

Geophysics ◽  
1992 ◽  
Vol 57 (8) ◽  
pp. 1034-1047 ◽  
Author(s):  
Biondo Biondi
Keyword(s):  
Estimation Method ◽  
Velocity Model ◽  
Velocity Estimation ◽  
Gradient Algorithm ◽  
Stratified Medium ◽  
Detailed Knowledge ◽  
Low Velocity ◽  
Velocity Anomaly ◽  
Interval Velocity ◽  
Lateral Variations

Imaging seismic data requires detailed knowledge of the propagation velocity of compressional waves in the subsurface. In conventional seismic processing, the interval velocity model is usually derived from stacking velocities. Stacking velocities are determined by measuring the coherency of the reflections along hyperbolic moveout trajectories in offset. This conventional method becomes inaccurate in geologically complex areas because the conversion of stacking velocities to interval velocities assumes a horizontally stratified medium and mild lateral variations in velocity. The tomographic velocity estimation proposed in this paper can be applied when there are dipping reflectors and strong lateral variations. The method is based on the measurements of moveouts by beam stacks. A beam stack measures local coherency of reflections along hyperbolic trajectories. Because it is a local operator, the beam stack can provide information on nonhyperbolic moveouts in the data. This information is more reliable than traveltimes of reflections picked directly from the data because many seismic traces are used for computing beam stacks. To estimate interval velocity, I iteratively search for the velocity model that best predicts the events in beam‐stacked data. My estimation method does not require a preliminary picking of the data because it directly maximizes the beam‐stack’s energy at the traveltimes and surface locations predicted by ray tracing. The advantage of this formulation is that detection of the events in the beam‐stacked data can be guided by the imposition of smoothness constraints on the velocity model. The optimization problem of maximizing beam‐stack energy is solved by a gradient algorithm. To compute the derivatives of the objective function with respect to the velocity model, I derive a linear operator that relates perturbations in velocity to the observed changes in the beam‐stack kinematics. The method has been successfully applied to a marine survey for estimating a low‐velocity anomaly. The estimated velocity function correctly predicts the nonhyperbolic moveouts in the data caused by the velocity anomaly.

Prestack 2D parsimonious Kirchhoff depth migration of elastic seismic data

Geophysics ◽  
2011 ◽  
Vol 76 (4) ◽  
pp. S157-S164 ◽  
Author(s):  
Robert Sun ◽  
George A. McMechan
Keyword(s):  
Seismic Data ◽  
Velocity Model ◽  
P Wave ◽  
P Value ◽  
Common Source ◽  
S Wave ◽  
P Values ◽  
Depth Migration ◽  
Reflector Surface ◽  
Kirchhoff Depth Migration

We have extended prestack parsimonious Kirchhoff depth migration for 2D, two-component, reflected elastic seismic data for a P-wave source recorded at the earth’s surface. First, we separated the P-to-P reflected (PP-) waves and P-to-S converted (PS-) waves in an elastic common-source gather into P-wave and S-wave seismograms. Next, we estimated source-ray parameters (source p values) and receiver-ray parameters (receiver p values) for the peaks and troughs above a threshold amplitude in separated P- and S-wavefields. For each PP and PS reflection, we traced (1) a source ray in the P-velocity model in the direction of the emitted ray angle (determined by the source p value) and (2) a receiver ray in the P- or S-velocity model back in the direction of the emergent PP- or PS-wave ray angle (determined by the PP- or PS-wave receiver p value), respectively. The image-point position was adjusted from the intersection of the source and receiver rays to the point where the sum of the source time and receiver-ray time equaled the two-way traveltime. The orientation of the reflector surface was determined to satisfy Snell’s law at the intersection point. The amplitude of a P-wave (or an S-wave) was distributed over the first Fresnel zone along the reflector surface in the P- (or S-) image. Stacking over all P-images of the PP-wave common-source gathers gave the stacked P-image, and stacking over all S-images of the PS-wave common-source gathers gave the stacked S-image. Synthetic examples showed acceptable migration quality; however, the images were less complete than those produced by scalar reverse-time migration (RTM). The computing time for the 2D examples used was about 1/30 of that for scalar RTM of the same data.

The application of 3-D depth migration to the development of an Alaskan offshore oil field

Geophysics ◽  
1994 ◽  
Vol 59 (10) ◽  
pp. 1551-1560 ◽  
Author(s):  
David N. Whitcombe ◽  
Eugene H. Murray ◽  
Laurie A. St. Aubin ◽  
Randall J. Carroll
Keyword(s):  
Velocity Model ◽  
Oil Field ◽  
Northwestern Part ◽  
Positioning Error ◽  
Depth Migration ◽  
Velocity Models ◽  
Positioning Errors ◽  
Ray Trace ◽  
Offshore Oil ◽  
Lateral Positioning

Inconsistencies in fault positioning between overlapping 3-D seismic surveys over the northwestern part of the Endicott Field highlighted lateral positioning errors of the order of 1000 ft (330 m) in the seismic images. This large uncertainty in fault positioning placed a high and often unacceptable risk on the placement of wells. To quantify and correct for the seismic positioning error, 3-D velocity models were developed for ray‐trace modeling. The lateral positioning error maps produced revealed significant variation in the mispositioning within the Endicott Field that were mainly caused by lateral variations in permafrost thickness. These maps have been used to correct the positions of mapped features and have enabled several wells to be successfully placed close to major faults. Prior to this analysis, these wells were considered too risky to place optimally. The seismic data were 3-D poststack depth migrated with the final velocity model, producing a repositioned image that was consistent with the ray‐trace predictions. Additionally, a general enhancement of data imaging improved the interpretability and enabled the remapping and subsequent successful development of the peripheral Sag Delta North accumulation.

Sign in / Sign up

Export Citation Format

Share Document