Near-surface scattered waves enhancement with source-receiver interferometry

Geophysics ◽  
2018 ◽  
Vol 83 (6) ◽  
pp. Q49-Q69
Author(s):  
Jixiang Xu ◽  
Shitai Dong ◽  
Huajuan Cui ◽  
Yan Zhang ◽  
Ying Hu ◽  
...  
Keyword(s):  
Seismic Data ◽  
Seismic Waves ◽  
Scattered Wave ◽  
Receiver Functions ◽  
Surface Velocity ◽  
Seismic Exploration ◽  
Common Source ◽  
Constructive Interference ◽  
Near Surface ◽  
The Common

Near-surface scattered waves (NSWs) are the main noise in seismic data in areas with a complex near surface and can be divided into surface-to-surface scattered waves and body-to-surface scattered waves. We have developed a method for NSW enhancement that uses modified source-receiver interferometry. The method consists of two parts. First, deconvolutional intersource interferometry is used to cancel the common raypath of seismic waves from a near-surface scatterer to the common receiver and the receiver function. Second, convolutional interreceiver interferometry is used to compensate the common raypath of seismic waves from the common source to the near-surface scatterer and the source function. For an isotropic point scatterer near the earth’s surface in modified source-receiver interferometry, a body-to-surface scattered wave can be reconstructed by constructive interference not only among three body-to-surface scattered waves but also among a body-to-surface scattered wave and two surface-to-surface scattered waves; a surface-to-surface scattered wave can be reconstructed by constructive interference not only among three surface-to-surface scattered waves but also among a surface-to-surface scattered wave and two body-to-surface scattered waves. According to stationary phase analysis based on the superposition principle, we have developed a so-called dual-wheel driving configuration of modified source-receiver interferometry for enhancing NSWs in the data of conventional seismic exploration. The main advantages of the scheme are that (1) it can be used to enhance NSWs without the need for any a priori knowledge of topography and near-surface velocity, (2) it can be used to reconstruct NSWs from real sources to real receivers, including 3D near-surface side-scattered waves, and (3) it can be applied to conventional seismic data with finite-frequency bandwidth, spatially limited and sparse arrays, different source and receiver functions, and static correction. Numerically simulated data and field seismic data are used to demonstrate the feasibility and effectiveness of the scheme.

Slant f-k transform of multichannel seismic surface wave data

Geophysics ◽  
2019 ◽  
Vol 84 (1) ◽  
pp. A19-A24 ◽  
Author(s):  
Aleksander S. Serdyukov ◽  
Aleksander V. Yablokov ◽  
Anton A. Duchkov ◽  
Anton A. Azarov ◽  
Valery D. Baranov
Keyword(s):  
Surface Wave ◽  
Seismic Data ◽  
Signal To Noise Ratio ◽  
Velocity Estimation ◽  
Seismic Exploration ◽  
Spectral Processing ◽  
Near Surface ◽  
Frequency Time Representation ◽  
Time Representation ◽  
S Transform

We have addressed the problem of estimating surface-wave phase velocities through the spectral processing of seismic data. This is the key step of the well-known near-surface seismic exploration method, called multichannel analysis of surface waves. To increase the accuracy and ensure the unambiguity of the selection of dispersion curves, we have developed a new version of the frequency-wavenumber ([Formula: see text]-[Formula: see text]) transform based on the S-transform. We obtain the frequency-time representation of seismic data. We analyze the obtained S-transform frequency-time representation in a slant-stacking manner but use a spatial Fourier transform instead of amplitude stacking. Finally, we build the [Formula: see text]-[Formula: see text] image by analyzing the spatial spectra for different steering values of the surface-wave group velocities. The time localization of the surface-wave packet at each frequency increases the signal-to-noise ratio because of an exclusion of noise in other time steps (which does not fall in the effective width of the corresponding wavelet). The new [Formula: see text]-[Formula: see text] transform, i.e., the slant [Formula: see text]-[Formula: see text] (SFK) transform, renders a better spectral analysis than the conventional [Formula: see text]-[Formula: see text] transform and yields more accurate phase-velocity estimation, which is critical for the surface-wave analysis. The advantages of the SFK transform have been confirmed by synthetic- and field-data processing.

Depth filtering for one‐component seismic data

Geophysics ◽  
1991 ◽  
Vol 56 (9) ◽  
pp. 1482-1485 ◽  
Author(s):  
Robert Sun ◽  
George A. McMechan
Keyword(s):  
Seismic Data ◽  
Seismic Waves ◽  
Downward Continuation ◽  
Near Surface ◽  
Left Behind ◽  
Elastic Data ◽  
Ground Roll ◽  
The Waves ◽  
Seismic Wavefield ◽  
Number Of Authors

The concept of downward continuation of a seismic wavefield recorded on the earth’s surface to remove near‐surface effects has previously been applied by a number of authors including Schultz and Sherwood (1980), Berryhill (1979, 1984), and McMechan and Chen (1990). Recently, McMechan and Sun (1991) demonstrated, using synthetic elastic data, that downward continuation of an elastic (two‐component) seismic wavefield separates various seismic waves, based on their depth of propagation. This was used to simultaneously remove direct waves and ground roll. The direct compressional and shear waves and the ground roll get left behind in the near surface during downward continuation; subsequent upward continuation reconstructs the surface‐recorded wavefield without the waves propagating in the shallow layers.

Near-surface full-waveform inversion in a transmission surface-consistent scheme

Geophysics ◽  
2020 ◽  
pp. 1-57
Author(s):  
Daniele Colombo ◽  
Ernesto Sandoval ◽  
Diego Rovetta ◽  
Apostolos Kontakis
Keyword(s):  
High Resolution ◽  
Seismic Data ◽  
Waveform Inversion ◽  
Surface Velocity ◽  
Full Waveform Inversion ◽  
Velocity Mapping ◽  
Signal To Noise ◽  
Near Surface ◽  
Velocity Modeling ◽  
Full Waveform

Land seismic velocity modeling is a difficult task largely related to the description of the near surface complexities. Full waveform inversion is the method of choice for achieving high-resolution velocity mapping but its application to land seismic data faces difficulties related to complex physics, unknown and spatially varying source signatures, and low signal-to-noise ratio in the data. Large parameter variations occur in the near surface at various scales causing severe kinematic and dynamic distortions of the recorded wavefield. Some of the parameters can be incorporated in the inversion model while others, due to sub-resolution dimensions or unmodeled physics, need to be corrected through data preconditioning; a topic not well described for land data full waveform inversion applications. We have developed novel algorithms and workflows for surface-consistent data preconditioning utilizing the transmitted portion of the wavefield, signal-to-noise enhancement by generation of CMP-based virtual super shot gathers, and robust 1.5D Laplace-Fourier full waveform inversion. Our surface-consistent scheme solves residual kinematic corrections and amplitude anomalies via scalar compensation or deconvolution of the near surface response. Signal-to-noise enhancement is obtained through the statistical evaluation of volumetric prestack responses at the CMP position, or virtual super (shot) gathers. These are inverted via a novel 1.5D acoustic Laplace-Fourier full waveform inversion scheme using the Helmholtz wave equation and Hankel domain forward modeling. Inversion is performed with nonlinear conjugate gradients. The method is applied to a complex structure-controlled wadi area exhibiting faults, dissolution, collapse, and subsidence where the high resolution FWI velocity modeling helps clarifying the geological interpretation. The developed algorithms and automated workflows provide an effective solution for massive full waveform inversion of land seismic data that can be embedded in typical near surface velocity analysis procedures.

scholarly journals Converted‐wave seismic exploration: Applications

Geophysics ◽  
2003 ◽  
Vol 68 (1) ◽  
pp. 40-57 ◽  
Author(s):  
Robert R. Stewart ◽  
James E. Gaiser ◽  
R. James Brown ◽  
Don C. Lawton
Keyword(s):  
Seismic Waves ◽  
Seismic Exploration ◽  
Fracture Density ◽  
Converted Wave ◽  
P Waves ◽  
Near Surface ◽  
S Waves ◽  
Subsurface Fluid ◽  
Processing Techniques ◽  
Gas Bearing

Converted seismic waves (specifically, downgoing P‐waves that convert on reflection to upcoming S‐waves are increasingly being used to explore for subsurface targets. Rapid advancements in both land and marine multicomponent acquisition and processing techniques have led to numerous applications for P‐S surveys. Uses that have arisen include structural imaging (e.g., “seeing” through gas‐bearing sediments, improved fault definition, enhanced near‐surface resolution), lithologic estimation (e.g., sand versus shale content, porosity), anisotropy analysis (e.g., fracture density and orientation), subsurface fluid description, and reservoir monitoring. Further applications of P‐S data and analysis of other more complicated converted modes are developing.

Land FWI in the Delaware Basin, west Texas: A case study

2020 ◽  
Vol 39 (5) ◽  
pp. 324-331
Author(s):  
Gary Murphy ◽  
Vanessa Brown ◽  
Denes Vigh
Keyword(s):  
Seismic Data ◽  
Waveform Inversion ◽  
Surface Velocity ◽  
High Signal ◽  
Data Sets ◽  
Data Set ◽  
Low Frequencies ◽  
Near Surface ◽  
Delaware Basin ◽  
West Texas

As part of a wide-reaching full-waveform inversion (FWI) research program, FWI is applied to an onshore seismic data set collected in the Delaware Basin, west Texas. FWI is routinely applied on typical marine data sets with high signal-to-noise ratio (S/N), relatively good low-frequency content, and reasonably long offsets. Land seismic data sets, in comparison, present significant challenges for FWI due to low S/N, a dearth of low frequencies, and limited offsets. Recent advancements in FWI overcome limitations due to poor S/N and low frequencies making land FWI feasible to use to update the shallow velocities. The chosen area has contrasting and variable near-surface conditions providing an excellent test data set on which to demonstrate the workflow and its challenges. An acoustic FWI workflow is used to update the near-surface velocity model in order to improve the deeper image and simultaneously help highlight potential shallow drilling hazards.

Applying integrated seismic technology to complex foothill areas of foreland basins in China

2019 ◽  
Vol 38 (8) ◽  
pp. 597-603
Author(s):  
Yong Fang ◽  
Wenshan Luo ◽  
Xiaoxia Luo ◽  
Xukui Feng ◽  
Bo Zhao ◽  
...  
Keyword(s):  
Seismic Data ◽  
Model Building ◽  
New Technologies ◽  
High Density ◽  
Hydrocarbon Exploration ◽  
Western China ◽  
Seismic Exploration ◽  
Foreland Basins ◽  
Near Surface ◽  
True Surface

Due to complicated near-surface conditions, including large elevation changes and complex geologic structures, accurate imaging of subsurface structures for hydrocarbon exploration in the foreland basins of western China has been challenging for many years. After decades of research and fieldwork, we developed an effective seismic exploration workflow that uses the latest technologies from acquisition to imaging. They include 3D high-density and wide-azimuth (WAZ) acquisition, 3D true-surface tilted transverse isotropy (TTI) anisotropic prestack depth migration, and dual-detachment structural modeling and interpretation. To further reduce uncertainty in velocity model building and improve imaging quality, our geologists, geophysicists, and reservoir engineers worked closely through the exploration cycle (seismic acquisition, processing, and interpretation). This exploration model has been used successfully in hydrocarbon exploration of many complex foothill areas in western China. Three-dimensional WAZ high-density seismic surveys have been conducted over 40,000 km2 of the foreland basins, greatly improving the field seismic data quality. After application of 3D true-surface TTI anisotropic depth model building and imaging with integrated structural interpretation, new discoveries of hydrocarbon reservoirs have increased. The application of new technologies not only increased drilling success but also reduced depth well-tie errors between seismic data and wells.

scholarly journals Mitigation of defocusing by statics and near-surface velocity errors by interferometric least-squares migration with a reference datum

Geophysics ◽  
2016 ◽  
Vol 81 (4) ◽  
pp. S195-S206 ◽  
Author(s):  
Mrinal Sinha ◽  
Gerard T. Schuster
Keyword(s):  
Least Squares ◽  
Prior Knowledge ◽  
Seismic Data ◽  
Field Data ◽  
Velocity Model ◽  
Well Logs ◽  
Surface Velocity ◽  
Near Surface ◽  
Reference Layer ◽  
Least Squares Migration

Imaging seismic data with an erroneous migration velocity can lead to defocused migration images. To mitigate this problem, we first choose a reference reflector whose topography is well-known from the well logs, for example. Reflections from this reference layer are correlated with the traces associated with reflections from deeper interfaces to get crosscorrelograms. Interferometric least-squares migration (ILSM) is then used to get the migration image that maximizes the crosscorrelation between the observed and the predicted crosscorrelograms. Deeper reference reflectors are used to image deeper parts of the subsurface with a greater accuracy. Results on synthetic and field data show that defocusing caused by velocity errors is largely suppressed by ILSM. We have also determined that ILSM can be used for 4D surveys in which environmental conditions and acquisition parameters are significantly different from one survey to the next. The limitations of ILSM are that it requires prior knowledge of a reference reflector in the subsurface and the velocity model below the reference reflector should be accurate.

The Suppression Technique of Near-surface Scattered Wave in Mountain Seismic Exploration

2016 ◽  
Author(s):  
Jixiang Xu* ◽  
Huajuan Cui ◽  
Shitai Dong ◽  
Xiping Sun ◽  
Shanglin Liang
Keyword(s):  
Scattered Wave ◽  
Seismic Exploration ◽  
Near Surface ◽  
Suppression Technique
Sign in / Sign up

Export Citation Format

Share Document