Circular Economy in Combating Construction and Demolition Wastes Including Seismic Debris

2021 ◽  
pp. 3-10
Author(s):  
Sannidhya Kumar Ghosh
Minerals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 672
Author(s):  
Dimitris Kioupis ◽  
Aggeliki Skaropoulou ◽  
Sotirios Tsivilis ◽  
Glikeria Kakali

One of the areas of priority in a circular economy, regarding waste management, regards the valorization of construction and demolition wastes (CDW). This study suggests the synthesis of geopolymeric binders based almost entirely on construction and demolition wastes. Ceramic waste was used as the aluminosilicate precursor of the geopolymer synthesis, while glass waste was applied in the preparation of the activation solution. A fractional experimental design defined the optimum synthesis parameters, based on compressive strength values. The final products were characterized by means of X-Ray Diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The glass waste was appropriately processed in order to prepare the activation solution for the geopolymerization of brick waste. In this work, CDW-based geopolymers were produced with a compressive strength in the range 10–44 MPa. The developed products contained 80–90 wt.% CDWs, depending on the method of activator preparation.


2020 ◽  
Vol 12 (14) ◽  
pp. 5775 ◽  
Author(s):  
Rafael A. Robayo-Salazar ◽  
William Valencia-Saavedra ◽  
Ruby Mejía de Gutiérrez

This article demonstrates the possibility of producing alkali-activated materials (AAM) from a mixture of mechanically processed concrete, ceramic, masonry, and mortar wastes, as a sustainable alternative for recycling construction and demolition wastes (CDWs) under real conditions. The addition of 10% Portland cement allowed the materials to cure at room temperature (25 °C). CDW binder achieved a compressive strength of up to 43.9 MPa and it was classified as a general use and low heat of hydration cement according to ASTM C1157. The concrete produced with this cement and the crushed aggregates also from CDW reported a compressive strength of 33.9 MPa at 28 days of curing and it was possible to produce a high-class structural block with 26.1 MPa according to ASTM C90. These results are considered one option in making full use of CDWs as binder and aggregates, using alkaline activation technology thereby meeting the zero-waste objective within the concept of the circular economy.


Author(s):  
Tamara Merkulova ◽  
Kateryna Kononova ◽  
Olena Titomir

Author(s):  
Susan EVANS

This case study explores the strategic business opportunities, for Lane Crawford, an iconic luxury department store, to transition in a circular economy towards sustainability. A new experimentation framework was developed and conducted among cross departmental employees, during a Design Lab, with intention to co-create novel Circular Economy business concepts towards a new vision: the later was a reframe of the old system based on the principles of sustainability; to move beyond a linear operational model towards a circular economy that can contribute to a regenerative society. This work draws on both academic and professional experience and was conducted through professional practice. It was found that innovative co-created concepts, output from the Design Lab, can create radical change in a circular economy that is holistically beneficial and financially viable; looking forward to extract greater value a)Internal organization requires remodeling to transform towards a circular economy; b)Requirement for more horizonal teams across departments vs solely vertical; c)New language and relationships are required to be able to transition towards a circular economy; d)Some form of physical and virtual space requirements, for cross-disciplinary teams to come together to co-create; e)Ability to iterate, learn and evolve requires agency across the business


2020 ◽  
Vol 19 (4) ◽  
pp. 598-617 ◽  
Author(s):  
S.V. Ratner

Subject. The article considers the concept of circular economy, which has originated relatively recently in the academic literature, and is now increasingly recognized in many countries at the national level. In the European Union, the transition to circular economy is viewed as an opportunity to improve competitiveness of the European Union, protect businesses from resource shortages and fluctuating prices for raw materials and supplies, and a way to increase employment and innovation. Objectives. The aim of the study is to analyze the incentives developed by the European Commission for moving to circular economy, and to assess their effectiveness on the basis of statistical analysis. Methods. I employ general scientific methods of research. Results. The analysis of the EU Action Plan for the Circular Economy enabled to conclude that the results of the recent research in circular economy barriers, eco-innovation, technology and infrastructure were successfully integrated into the framework of this document. Understanding the root causes holding back the circular economy development and the balanced combination of economic and administrative incentives strengthened the Action Plan, and it contributed to the circular economy development in the EU. Conclusions. The measures to stimulate the development of the circular economy proposed in the European Action Plan can be viewed as a prototype for designing similar strategies in other countries, including Russia. Meanwhile, a more detailed analysis of barriers to the circular economy at the level of individual countries and regions is needed.


2017 ◽  
Vol 16 (8) ◽  
pp. 1807-1817 ◽  
Author(s):  
Fabiana Tornese ◽  
Maria Grazia Gnoni ◽  
Giorgio Mossa ◽  
Giovanni Mummolo ◽  
Rossella Verriello

Sign in / Sign up

Export Citation Format

Share Document