Speciation of heavy metals in municipal sewage sludge from different capacity sewage treatment plants

2010 ◽  
pp. 285-290
Author(s):  
J Gawdzik ◽  
J Latosińska
Proceedings ◽  
2020 ◽  
Vol 51 (1) ◽  
pp. 12
Author(s):  
Izabela Bartkowska ◽  
Paweł Biedka ◽  
Izabela Anna Talalaj

This paper presents the process of autothermal thermophilic aerobic digestion (ATAD). The installations used in municipal sewage treatment plants in Poland were reviewed. The adopted solutions for sludge management and parameters of operating installations were presented. Attention was also drawn to the energy consumption of the process. On the basis of research carried out in the years 2003–2019 in the plants in question, the characteristics of sludge after the ATAD process were presented. The parameters that determine the usefulness of the sludge as an organic fertilizer are indicated above all.


2018 ◽  
Vol 64 (3) ◽  
pp. 131-144 ◽  
Author(s):  
Łukasz Szarek ◽  
Paweł Falaciński ◽  
Małgorzata Wojtkowska

AbstractThe growing number of municipal sewage treatment plants in Poland raises the problem of managing more and more sludge. The thermal treatment of municipal sewage sludge (TTMSS), which significantly reduces the volume of waste, results in an increase in the concentration of heavy metals in the fly ashes – the final products of the process. The search for methods of utilization of fly ash from TTMSS resulted in attempts to use it in hardening slurries widely used in hydro-engineering. Due to the nature of the application of this material in the cut-off walls (exposure to groundwater flow) one of the key issues is the degree of heavy metal immobilization. The paper attempted to determine the degree of leaching of selected heavy metals from the hardened hardening slurry, composed of fly ash from TTMSS. For this purpose, the eluates were prepared from samples, after various periods of curing, using a dynamic short-term method called “Batch test”. The liquid used for leaching was: distilled water and 0.1 molar EDTA solution – to determine the amount of potentially mobile heavy metal forms. The results show the possibility of the safe usage of fly ash from TTMSS as an additive for hardening slurries.


2013 ◽  
Vol 671-674 ◽  
pp. 2736-2741
Author(s):  
Yin An Ming ◽  
Tao Tao

To reuse municipal sewage sludge safely, experiment was carried out on grapefruit trees fertilized with composted sludge from Shiweitou Sewage Treatment Plant in Xiamen City of China, and a method was introduced of how to assess the environmental quality of grapefruit trees soil fertilized with sludge by Set Pair Analysis (SPA) model. The results showed that the soil in the surface layer (0-15cm) and the deeper layer (15-30cm) was less clean, and the environment of soil was not polluted. Thus it was feasible to use sludge as fruit fertilizer. The maximum service life of sludge for continuous land application was estimated by taking Cd as the limiting factor, which would provide scientific guide and technical support for safe land application of sludge.


Author(s):  
A. Ribeiro ◽  
J. Araújo ◽  
A. Mota ◽  
R. Campos ◽  
C. Vilarinho ◽  
...  

Abstract A large quantity of sludges resulting from the treatment of MWWTP (Municipal Wastewater Treatment Plant) effluent is generated annually following the increase of population density and acceleration of urbanization. Sludge production in Europe has been predicted by around 12 million tons in 2020. As a solid waste, appropriate disposal of Municipal Sewage Sludge (MSS) has been taken seriously due to its larger volume and toxic substances such as heavy metals. Electrokinetic remediation has more advantages in heavy metals uptake compared to other technologies, due to the ability to treat soils in-situ and to remove heavy metals from soils. In this work, it was studied the remediation of MSS by the electrokinetic remediation coupled with activated carbon (AC) as a permeable reactive barrier (PRB). It was applied an electric current of 3 V cm−1 and it was used an AC/sludge ratio of 30 g kg−1 of contaminated sludge for the preparation of the PRB. In each trial, the evolution of cadmium (Cd), lead (Pb), copper (Cu), chromium (Cr), nickel (Ni) and zinc (Zn) removal from the sludge were evaluated. Results proved that this process is perfectly suited for the removal of chromium, nickel and zinc metals from the sludge. At the end of the operation time, it was achieved a maximum removal rate of 56% for chromium, 73% for nickel and 99% for zinc, with initial concentrations of 2790 mg kg−1, 2840 mg kg−1, and 94200 mg kg−1, respectively. Based on these results, it was proved the technical viability of the proposed technology (electrokinetic with AC as a permeable reactive barrier) to treat municipal sewage sludges.


2019 ◽  
Vol 8 (1) ◽  
Author(s):  
Nahid A.A. Siddig ◽  
Asma A. Ahmed ◽  
Sarra A.M. Saad ◽  
Faisal Hammad Mekky Koua

Municipal sewage sludge from wastewater treatment is an important nutritional source for sustainable agriculture. Here, we report on the assessment of the accumulation of heavy metals in Nile tilapia Oreochromis niloticus (Trewavas 1983) fed on earthworms Eisenia fetida reared on soil treated with different concentrations of sewage sludge (25% and 100%) during sludge-earthworm-fish short-term cycling. In this short-term cycling the Nile tilapia collected from the White Nile were chosen as final consumers, whereas the earthworms reared on loam soil mixed with different ratios of sludge were used as a feed for the final consumers. Our results indicate that the concentrations of Cd2+, Cr2+, Pb2+ and Zn2+ in the sludge treated soil are proportional to the sludge content in the soil. Importantly, the accumulation of these heavy metals was significantly low in the earthworms and the Nile tilapia in comparison with the treated soil and that these concentrations in the Nile tilapia were below the international limits recommended by the US Environmental Protection Agency (2014). Moreover, the growth and overall flesh quality of the fish were improved as indicated by the growth increase up to 146% when fed on earthworm reared in 100% sludge. Additionally, our physicochemical properties (i.e. pH, soil moisture, electric conductivity and organic matters) evaluation on the soil indicates an improvement of the soil quality when mixed with sewage sludge. These results suggest a sustainable application of sewage sludge in fish culture owing to its high nutritional values, low cost, and low risk of hazardous heavy metals when using primary consumers with heavy metals bioaccumulation capability such as E. fetida.


1994 ◽  
Vol 21 (5) ◽  
pp. 728-735 ◽  
Author(s):  
Y. G. Du ◽  
T. R. Sreekrishnan ◽  
R. D. Tyagi ◽  
Peter G. C. Campbell

Microbial leaching for heavy metals removal from municipal sewage sludge is a complex biological process. The ultimate metal solubilization achieved depends on the type of sludge involved (nondigested, aerobically digested or anaerobically digested sludge), the decrease in sludge pH as a result of the leaching operation, and the concentration of metals initially present in the sludge. In addition, the system temperature exerts an indirect but strong influence by its effect on the bacterial growth and acid production process. A neural-net-based model was developed to predict the solubilization of six heavy metals, Cd, Cr, Cu, Ni, Pb, and Zn, from sewage sludge using the bioleaching process. The only input parameters required are the type of sludge, initial metal concentrations in the sludge, and the sludge pH. The model yielded satisfactory predictions of metal solubilization when tested with a number of actual experimental data. Key words: heavy metals, microbial leaching, modelling, neural-net, sewage sludge.


2016 ◽  
Vol 63 (1) ◽  
pp. 47-61 ◽  
Author(s):  
Paweł Falacinski ◽  
Łukasz Szarek

Abstract In Poland, in recent years, there has been a rapid accumulation of sewage sludge - a by-product in the treatment of urban wastewater. This has come about as a result of infrastructure renewal, specifically, the construction of modern sewage treatment plants. The more stringent regulations and strategic goals adopted for modern sewage management have necessitated the application of modern engineering methodology for the disposal of sewage sludge. One approach is incineration. As a consequence, the amount of fly ash resulting from the thermal treatment of municipal sewage sludge has grown significantly. Hence, intensive work is in progress for environmentally safe management of this type of waste. The aim of the experiment was to evaluate the possibility of using the fly ash that results from municipal sewage sludge thermal treatment (SSTT) as an additive to hardening slurries. This type of hardening slurry with various types of additives, e.g. coal combustion products, is used in the construction of cut-off walls in hydraulic structures. The article presents the technological and functional parameters of hardening slurries with an addition of fly ash obtained by SSTT. Moreover, the usefulness of these slurries is analysed on the basis of their basic properties, i.e. density, contractual viscosity, water separation, structural strength, volumetric density, hydraulic conductivity, compressive and tensile strength. The mandated requirements for slurries employed in the construction of cut-off walls in flood embankments are listed as a usefulness criteria. The article presents the potential uses of fly ash from SSTT in hardening slurry technology. It also suggests directions for further research to fully identify other potential uses of this by-product in this field.


Sign in / Sign up

Export Citation Format

Share Document