Factors Influencing Combustion Chamber Wall Temperatures in a Liquid-Cooled, Automotive, Spark-Ignition Engine

1985 ◽  
Vol 199 (3) ◽  
pp. 207-214 ◽  
Author(s):  
I C Finlay ◽  
D Harris ◽  
D J Boam ◽  
B I Parks
Keyword(s):  
Heat Transfer ◽  
Combustion Chamber ◽  
Cylinder Head ◽  
Nucleate Boiling ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Chamber Wall ◽  
Transfer Model ◽  
Factors Influencing ◽  
Good Agreement

The influence on cylinder head temperatures of parameters such as cylinder head material, coolant composition, pressure, temperature and velocity was investigated. Each of these parameters was systematically varied and its influence on combustion chamber wall temperature measured. Good agreement is shown between the measured values and corresponding predictions from a heat transfer model incorporating forced-convective, sub-cooled, nucleate boiling. The results suggest that nucleate boiling can play an important role in the transfer of heat from cylinder head to coolant.

Thermophysical Properties of Working Substance and Heat Transfer in a Hydrogen Combustion Engine

2003 ◽  
Author(s):  
T. Shudo ◽  
H. Oka
Keyword(s):  
Heat Transfer ◽  
Combustion Chamber ◽  
Heat Loss ◽  
Thermophysical Properties ◽  
Internal Combustion Engines ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Hydrogen Combustion ◽  
Spark Ignition Engine ◽  
Combustion Engines

Hydrogen is a clean alternative to fossil fuels for internal combustion engines and can be easily used in spark-ignition engines. However, the characteristics of the engines fueled with hydrogen are largely different from those with conventional hydrocarbon fuels. A higher burning velocity and a shorter quenching distance for hydrogen as compared with hydrocarbons bring a higher degree of constant volume and a larger heat transfer from the burning gas to the combustion chamber wall of the engines. Because of the large heat loss, the thermal efficiency of an engine fueled with hydrogen is sometimes lower than that with hydrocarbons. Therefore, the analysis and the reduction of the heat loss are crucial for the efficient utilization of hydrogen in internal combustion engines. The empirical correlations to describe the total heat transferred from the burning gas to the combustion chamber walls are often used to calculate the heat loss in internal combustion engines. However, the previous research by one of the authors has shown that the widely used heat transfer correlations cannot be properly applied to the hydrogen combustion even with adjusting the constants in them. For this background, this research analyzes the relationship between characteristics of thermophysical properties of working substance and heat transfer to the wall in a spark-ignition engine fueled with hydrogen.

Modifications to Quasi-Dimensional Burning Model of Spark Ignition Engines

2009 ◽  
Author(s):  
M. R. Modarres Razavi ◽  
A. Hosseini ◽  
M. Dehnavi
Keyword(s):  
Heat Transfer ◽  
Combustion Chamber ◽  
Numerical Solution ◽  
Taylor Expansion ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
Algebraic Functions ◽  
Spark Plug ◽  
Burning Model

The way in which position of spark plug affects combustion in a spark ignition engine can be analyzed by using two-zone burning model. The purpose of this paper is to extract correlations to simulate the geometric interaction between the propagating flame and the general cylindrical combustion chamber. Eight different cases were recognized. Appropriate equations to calculate the flame area (Af), the burned and the unburned volume (Vb & Vu) and the heat transfer areas related to the burned and unburned regions were derived and presented for each case using Taylor expansion in order to replace numerical solution with trigonometric algebraic functions.

Analysis of Thermal Efficiency in a Hydrogen Premixed Spark Ignition Engine

1999 ◽  
Author(s):  
Toshio Shudo ◽  
Yasuo Nakajima ◽  
Takayuki Futakuchi
Keyword(s):  
Combustion Chamber ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Methane Combustion ◽  
Spark Ignition ◽  
Hydrogen Combustion ◽  
Spark Ignition Engine ◽  
Chamber Wall ◽  
Flame Velocity

Abstract Hydrogen has higher flame velocity and smaller quenching distance than hydrocarbon fuels, and is supposed to have special characteristics in combustion process of internal combustion engines. In this research, contributors to thermal efficiency in a hydrogen premixed spark ignition engine were analyzed and compared with methane combustion. Results showed hydrogen combustion had higher cooling loss to combustion chamber wall, and thermal efficiency of hydrogen combustion was mainly dominated by both cooling loss to combustion chamber wall and degree of constant volume combustion.

CFD Study of Heat Transfer in a Spark-Ignition Engine Combustion Chamber

2006 ◽  
Vol 129 (5) ◽  
pp. 609-616 ◽  
Author(s):  
A. R. Noori ◽  
M. Rashidi
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Temporal Variation ◽  
Combustion Chamber ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Si Engine ◽  
Engine Combustion

The objective of this study is the thermal investigation of a typical spark-ignition (SI) engine combustion chamber with particular focus in determination of the locations where the heat flux and heat transfer coefficient are highest. This subject is an important key for some design purposes especially thermal loading of the piston and cylinder head. To this end, CFD simulation using the KIVA-3V CFD code on a PC platform for flow, combustion, and heat transfer in a typical SI engine has been performed. Some results including the temporal variation of the area-averaged heat flux and heat transfer coefficient on the piston, combustion chamber, and cylinder wall are presented. Moreover, the temporal variation of the local heat transfer coefficient and heat flux along a centerline on the piston as well as a few locations on the combustion chamber wall are shown. The investigation reveals that during the combustion period, the heat flux and heat transfer coefficient vary substantially in space and time due to the transient nature of the flame propagation. For example, during the early stages of the flame impingement on the wall, the heat flux undergoes a rapid increase by as much as around 10 times the preimpingement level. In other words, the initial rise of the heat flux at any location is related to the time of the flame arrival at that location.

Sign in / Sign up

Export Citation Format

Share Document