New Bogie for German ICE (InterCity Express) Based on BT41

1994 ◽  
Vol 208 (1) ◽  
pp. 15-21 ◽  
Author(s):  
C Freitag ◽  
S Karch
Keyword(s):  
High Speed ◽  
Railway Track ◽  
Modular Construction ◽  
Further Development ◽  
Industrial Company ◽  
Construction System

Since 1979, the SIG Swiss Industrial Company (SIG) has been developing a modular construction system for bogies. Recently its range has been expanded by the addition of two new bogie modules that will run on high-speed lines. One is for the bogie that British Rail InterCity 225 trains have been equipped with since 1989, which is designed to run on conventional railway track at speeds of up to 225 km/h. As a further development of this model there is now a second module for a high-speed bogie which runs at 300 km/h on new purpose-built track. This paper provides an account of the development, construction and testing of these two types of bogie.

scholarly journals Deformation Law and Control Limit of CRTSIII Slab Track under Subgrade Frost Heave

2021 ◽  
Vol 11 (8) ◽  
pp. 3520
Author(s):  
Xiaopei Cai ◽  
Qian Zhang ◽  
Yanrong Zhang ◽  
Qihao Wang ◽  
Bicheng Luo ◽  
...  
Keyword(s):  
High Speed ◽  
Base Plate ◽  
Element Model ◽  
Middle Part ◽  
Railway Track ◽  
Frost Heave ◽  
Track Structure ◽  
Slab Track ◽  
Plastic Damage ◽  
Track Irregularity

In order to find out the influence of subgrade frost heave on the deformation of track structure and track irregularity of high-speed railways, a nonlinear damage finite element model for China Railway Track System III (CRTSIII) slab track subgrade was established based on the constitutive theory of concrete plastic damage. The analysis of track structure deformation under different subgrade frost heave conditions was focused on, and amplitude the limit of subgrade frost heave was put forward according to the characteristics of interlayer seams. This work is expected to provide guidance for design and construction. Subgrade frost heave was found to cause cosine-type irregularities of rails and the interlayer seams in the track structure, and the displacement in lower foundation mapping to rail surfaces increased. When frost heave occured in the middle part of the track slab, it caused the greatest amount of track irregularity, resulting in a longer and higher seam. Along with the increase in frost heave amplitude, the length of the seam increased linearly whilst its height increased nonlinearly. When the frost heave amplitude reached 35 mm, cracks appeared along the transverse direction of the upper concrete surface on the base plate due to plastic damage; consequently, the base plate started to bend, which reduced interlayer seams. Based on the critical value of track structures’ interlayer seams under different frost heave conditions, four control limits of subgrade frost heave at different levels of frost heave amplitude/wavelength were obtained.

scholarly journals A Review of Different Aspects of Applying Asphalt and Bituminous Mixes under a Railway Track

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 169
Author(s):  
Kazem Jadidi ◽  
Morteza Esmaeili ◽  
Mehdi Kalantari ◽  
Mehdi Khalili ◽  
Moses Karakouzian
Keyword(s):  
High Speed ◽  
Review Paper ◽  
Railway Track ◽  
High Speed Train ◽  
Slab Track ◽  
Bituminous Mixtures ◽  
Railway Tracks ◽  
Potential Applications ◽  
Heavy Loads ◽  
Design And Construction

Asphalt is a common material that is used extensively for roadways. Furthermore, bituminous mixes have been used in railways, both as asphalt and as mortar. Different agencies and research institutes have investigated and suggested various applications. These studies indicate the benefits of bituminous material under railways, such as improving a substructure’s stiffness and bearing capacity; enhancing its dynamic characteristics and response, especially under high-speed train loads; waterproofing the subgrade; protecting the top layers against fine contamination. These potential applications can improve the overall track structure performance and lead to minimizing settlement under heavy loads. They can also guarantee an appropriate response under high-speed loads, especially in comparison to a rigid slab track. This review paper documents the literature related to the utilization of asphalt and bituminous mixes in railway tracks. This paper presents a critical review of the research in the application of asphalt and bituminous mixes in railway tracks. Additionally, this paper reviews the design and construction recommendations and procedures for asphalt and bituminous mixes in railway tracks as practiced in different countries. This paper also provides case studies of projects where asphalt and bituminous mixes have been utilized in railway tracks. It is anticipated that this review paper will facilitate (1) the exchange of ideas and innovations in the area of the design and construction of railway tracks and (2) the development of unified standards for the design and construction of railway tracks with asphalt and bituminous mixtures.

scholarly journals Modular Construction System (MCS) in Malaysia: Mass Customization Through Combinatorial

2019 ◽  
Vol 385 ◽  
pp. 012030
Author(s):  
S Aziz ◽  
S N Che Mohd Nasir ◽  
R Hatrom ◽  
L Ahmad Bazuli ◽  
M R Abdullah
Keyword(s):  
Mass Customization ◽  
Modular Construction ◽  
Construction System

Very-High-Speed Tests on the French Railway Track

1991 ◽  
Vol 20 (3-4) ◽  
pp. 185-206 ◽  
Author(s):  
P. DELFOSSE
Keyword(s):  
High Speed ◽  
Railway Track ◽  
Very High

scholarly journals The Design and Implementation of an Inertial GNSS Odometer Integrated Navigation System Based on a Federated Kalman Filter for High-Speed Railway Track Inspection

2021 ◽  
Vol 11 (11) ◽  
pp. 5244
Author(s):  
Xinchun Zhang ◽  
Ximin Cui ◽  
Bo Huang
Keyword(s):  
Kalman Filter ◽  
Navigation System ◽  
High Speed ◽  
Measurement Accuracy ◽  
Railway Track ◽  
Filter Method ◽  
Integrated Navigation ◽  
High Speed Railway ◽  
Track Geometry ◽  
Integrated Navigation System

The detection of track geometry parameters is essential for the safety of high-speed railway operation. To improve the accuracy and efficiency of the state detector of track geometry parameters, in this study we propose an inertial GNSS odometer integrated navigation system based on the federated Kalman, and a corresponding inertial track measurement system was also developed. This paper systematically introduces the construction process for the Kalman filter and data smoothing algorithm based on forward filtering and reverse smoothing. The engineering results show that the measurement accuracy of the track geometry parameters was better than 0.2 mm, and the detection speed was about 3 km/h. Thus, compared with the traditional Kalman filter method, the proposed design improved the measurement accuracy and met the requirements for the detection of geometric parameters of high-speed railway tracks.

scholarly journals Random-Forest Machine Learning Approach for High-Speed Railway Track Slab Deformation Identification Using Track-Side Vibration Monitoring

2021 ◽  
Vol 11 (11) ◽  
pp. 4756
Author(s):  
Gaoran Guo ◽  
Xuhao Cui ◽  
Bowen Du
Keyword(s):  
Random Forest ◽  
High Speed ◽  
Recognition Rate ◽  
Operation Time ◽  
Deformation Monitoring ◽  
Vibration Monitoring ◽  
Railway Track ◽  
Ballastless Track ◽  
Train Operation ◽  
Track Slab

High-speed railways (HSRs) are established all over the world owing to their advantages of high speed, ride comfort, and low vibration and noise. A ballastless track slab is a crucial part of the HSR, and its working condition directly affects the safe operation of the train. With increasing train operation time, track slabs suffer from various defects such as track slab warping and arching as well as interlayer disengagement defect. These defects will eventually lead to the deformation of track slabs and thus jeopardize safe train operation. Therefore, it is important to monitor the condition of ballastless track slabs and identify their defects. This paper proposes a method for monitoring track slab deformation using fiber optic sensing technology and an intelligent method for identifying track slab deformation using the random-forest model. The results show that track-side monitoring can effectively capture the vibration signals caused by train vibration, track slab deformation, noise, and environmental vibration. The proposed intelligent algorithm can identify track slab deformation effectively, and the recognition rate can reach 96.09%. This paper provides new methods for track slab deformation monitoring and intelligent identification.

Risk Assessment Method for High-Speed Railway Track Based on Dynamically Weighted Acceleration

2021 ◽  
Vol 27 (4) ◽  
pp. 04021030
Author(s):  
Xiaohui Wang ◽  
Jianwei Yang ◽  
Jinhai Wang ◽  
Yanxue Wang ◽  
Fu Liu
Keyword(s):  
Risk Assessment ◽  
High Speed ◽  
Assessment Method ◽  
Railway Track ◽  
High Speed Railway ◽  
Risk Assessment Method

On the Planning and Construction of Railway Curved Track

2021 ◽  
Vol 13 (2) ◽  
Author(s):  
Sono Bhardawaj ◽  
Rakesh Chandmal Sharma ◽  
Sunil Kumar Sharma ◽  
Neeraj Sharma
Keyword(s):  
High Speed ◽  
Time Derivative ◽  
Railway Track ◽  
Lateral Acceleration ◽  
Transition Curve ◽  
Railway Vehicle ◽  
Geometric Conditions ◽  
Curve Track ◽  
Curved Track ◽  
Transition Curves

Increasing demand for railway vehicle speed has pushed the railway track designers to develop high-quality track. An important measure of track quality is the character of the transition curve track connecting different intersecting straight tracks. A good transition curve track must be able to negotiate the intermittent stresses and dynamic effects caused by changes in lateral acceleration at high speed. This paper presents the constructional methods for planning transition curves considering the dynamics of movement. These methods consider the non-compensated lateral acceleration, deviation in lateral acceleration and its higher time derivatives. This paper discusses the laying methods of circular, vertical and transition curves. Key aspects in laying a curved track e.g. widening of gauge on curves are discussed in this paper. This paper also suggests a transition curve which is effective not only from a dynamic point of view considering lateral acceleration and its higher time derivative but also consider the geometric conditions along with the required deflection angle.

scholarly journals Biaxial Shear Load Capacity of Anchor System for Quick-Hardening Track on Railway Bridges

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Kyoung Chan Lee ◽  
Il-Wha Lee ◽  
Seong-Cheol Lee
Keyword(s):  
High Speed ◽  
Ride Comfort ◽  
Load Capacity ◽  
Frictional Resistance ◽  
Shear Capacity ◽  
Railway Track ◽  
Railway Bridges ◽  
Anchor System ◽  
Ballast Track ◽  
Anchor Systems

Quick-hardening railway track was developed to rapidly convert old-style ballast track to slab track in order to improve its maintainability and ride comfort. On bridges, quick-hardening track is applied in a segmented structure to reduce the temperature constraint, and anchors at the centers of the segments securely couple the track to the bridge. In this study, an anchor system is proposed that facilitates fast construction, and two designs for the proposed anchor systems are provided along with experimental test results of the same. Two anchor system designs were developed to allow for the maximum possible longitudinal and transverse loads in high-speed railways while considering the frictional resistance between the track slab and bridge deck. The biaxial shear capacity of each design was investigated experimentally, and the structural capacity for biaxial shear loads was evaluated using an elliptical curve to represent the longitudinal and transverse shear capacities. The minimum friction coefficient was determined based on the results of the evaluation to minimize damage to the anchor. The results obtained from the experiments confirmed that the proposed anchor systems possess sufficient shear capacity for application on high-speed railway bridges.

Sign in / Sign up

Export Citation Format

Share Document