scholarly journals A Review of Different Aspects of Applying Asphalt and Bituminous Mixes under a Railway Track

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 169
Author(s):  
Kazem Jadidi ◽  
Morteza Esmaeili ◽  
Mehdi Kalantari ◽  
Mehdi Khalili ◽  
Moses Karakouzian
Keyword(s):  
High Speed ◽  
Review Paper ◽  
Railway Track ◽  
High Speed Train ◽  
Slab Track ◽  
Bituminous Mixtures ◽  
Railway Tracks ◽  
Potential Applications ◽  
Heavy Loads ◽  
Design And Construction

Asphalt is a common material that is used extensively for roadways. Furthermore, bituminous mixes have been used in railways, both as asphalt and as mortar. Different agencies and research institutes have investigated and suggested various applications. These studies indicate the benefits of bituminous material under railways, such as improving a substructure’s stiffness and bearing capacity; enhancing its dynamic characteristics and response, especially under high-speed train loads; waterproofing the subgrade; protecting the top layers against fine contamination. These potential applications can improve the overall track structure performance and lead to minimizing settlement under heavy loads. They can also guarantee an appropriate response under high-speed loads, especially in comparison to a rigid slab track. This review paper documents the literature related to the utilization of asphalt and bituminous mixes in railway tracks. This paper presents a critical review of the research in the application of asphalt and bituminous mixes in railway tracks. Additionally, this paper reviews the design and construction recommendations and procedures for asphalt and bituminous mixes in railway tracks as practiced in different countries. This paper also provides case studies of projects where asphalt and bituminous mixes have been utilized in railway tracks. It is anticipated that this review paper will facilitate (1) the exchange of ideas and innovations in the area of the design and construction of railway tracks and (2) the development of unified standards for the design and construction of railway tracks with asphalt and bituminous mixtures.

scholarly journals Deformation Law and Control Limit of CRTSIII Slab Track under Subgrade Frost Heave

2021 ◽  
Vol 11 (8) ◽  
pp. 3520
Author(s):  
Xiaopei Cai ◽  
Qian Zhang ◽  
Yanrong Zhang ◽  
Qihao Wang ◽  
Bicheng Luo ◽  
...  
Keyword(s):  
High Speed ◽  
Base Plate ◽  
Element Model ◽  
Middle Part ◽  
Railway Track ◽  
Frost Heave ◽  
Track Structure ◽  
Slab Track ◽  
Plastic Damage ◽  
Track Irregularity

In order to find out the influence of subgrade frost heave on the deformation of track structure and track irregularity of high-speed railways, a nonlinear damage finite element model for China Railway Track System III (CRTSIII) slab track subgrade was established based on the constitutive theory of concrete plastic damage. The analysis of track structure deformation under different subgrade frost heave conditions was focused on, and amplitude the limit of subgrade frost heave was put forward according to the characteristics of interlayer seams. This work is expected to provide guidance for design and construction. Subgrade frost heave was found to cause cosine-type irregularities of rails and the interlayer seams in the track structure, and the displacement in lower foundation mapping to rail surfaces increased. When frost heave occured in the middle part of the track slab, it caused the greatest amount of track irregularity, resulting in a longer and higher seam. Along with the increase in frost heave amplitude, the length of the seam increased linearly whilst its height increased nonlinearly. When the frost heave amplitude reached 35 mm, cracks appeared along the transverse direction of the upper concrete surface on the base plate due to plastic damage; consequently, the base plate started to bend, which reduced interlayer seams. Based on the critical value of track structures’ interlayer seams under different frost heave conditions, four control limits of subgrade frost heave at different levels of frost heave amplitude/wavelength were obtained.

scholarly journals The Effect of Pendolino high-speed rail on the structure of buildings located in the proximity of railway tracks

2016 ◽  
Vol 21 (1) ◽  
pp. 231-238
Author(s):  
K. Grębowski ◽  
Z. Ulman
Keyword(s):  
Dynamic Analysis ◽  
High Speed ◽  
Building Structure ◽  
High Speed Train ◽  
High Speed Rail ◽  
Railway Tracks ◽  
High Speed Trains ◽  
Railway System ◽  
The Subject ◽  
The Impact

Abstract The following research focuses on the dynamic analysis of impact of the high-speed train induced vibrations on the structures located near railway tracks. The office complex chosen as the subject of calculations is located in the northern part of Poland, in Gdańsk, in the proximity of Pendolino, the high speed train route. The high speed trains are the response for the growing needs for a more efficient railway system. However, with a higher speed of the train, the railway induced vibrations might cause more harmful resonance in the structures of the nearby buildings. The damage severity depends on many factors such as the duration of said resonance and the presence of additional loads. The studies and analyses helped to determinate the method of evaluating the impact of railway induced vibrations on any building structure. The dynamic analysis presented in the research is an example of a method which allows an effective calculation of the impact of vibrations via SOFISTIK program.

Moving element analysis of discretely supported high-speed rail systems

2017 ◽  
Vol 232 (3) ◽  
pp. 783-797 ◽  
Author(s):  
Jian Dai ◽  
Kok Keng Ang ◽  
Minh Thi Tran ◽  
Van Hai Luong ◽  
Dongqi Jiang
Keyword(s):  
High Speed ◽  
Railway Track ◽  
High Speed Train ◽  
Element Analysis ◽  
High Speed Rail ◽  
Mass System ◽  
Rail System ◽  
Rail Systems ◽  
Track System ◽  
The Difference

In this paper, a computational scheme in conjunction with the moving element method has been proposed to investigate the dynamic response of a high-speed rail system in which the discrete sleepers on the subgrade support the railway track. The track foundation is modeled as a beam supported by uniformly spaced discrete spring-damper units. The high-speed train is modeled as a moving sprung-mass system that travels over the track. The effect of the stiffness of the discrete supports, train speed, and railhead roughness on the dynamic behavior of the train–track system has been investigated. As a comparison, the response of a continuously supported high-speed rail system that uses a foundation stiffness equivalent to that of a discretely supported track has been obtained. The difference in results between the “equivalent” continuously supported and the discretely supported high-speed rails has been compared and discussed. In general, the study found that a high-speed train that travels over a discretely supported track produces more severe vibrations than that travels over a continuously supported track of equivalent foundation stiffness.

Design and Construction Technologies

2010 ◽  
Author(s):  
Cailan Wu ◽  
Weixiao Cui ◽  
Chengzhi Zhang ◽  
Huaijian Li ◽  
Hongliang Yan
Keyword(s):  
High Speed ◽  
Actual Situation ◽  
Technical Standard ◽  
High Speed Railway ◽  
Deformation Control ◽  
Slab Track ◽  
Railway Construction ◽  
Scheme Optimization ◽  
Key Technologies ◽  
Design And Construction

Combining with the actual situation of China’s railway construction, this paper introduces the key technologies of design and construction of high-speed railway, such as the scheme optimization of subgrade, bridge and tunnel, technical standard, deformation control, advance geology forecast and settlement observation, etc. It also discusses the design and construction problems on the slab layout and interface of CRTS II slab track on bridge section, switch area, subgrade area and the transition with different track structures.

Out-of-Plane Responses of Overspeeding High-Speed Train on Curved Track

2018 ◽  
Vol 18 (11) ◽  
pp. 1850132 ◽  
Author(s):  
Jian Dai ◽  
Kok Keng Ang ◽  
Van Hai Luong ◽  
Minh Thi Tran ◽  
Dongqi Jiang
Keyword(s):  
High Speed ◽  
Numerical Study ◽  
Contact Forces ◽  
Railway Track ◽  
High Speed Train ◽  
Track Segment ◽  
Out Of Plane ◽  
Train Speed ◽  
Curved Track ◽  
Design Speed

This paper presents a numerical study on the out-of-plane responses of a high-speed train running on a curved railway track segment using the moving element method. The accuracy and efficiency of the proposed computation model presented herein are compared with available analytical results from the literature and a finite element solver based on a simplified moving load model. Thereafter, a half-railcar moving sprung-mass model and a double-rail track-foundation model are presented to investigate the behavior of a high-speed train traversing a curved track, particularly when the train speed is greater than the design speed of the curved track segment. The results show that the train speed and severity of track irregularity significantly affect the contact forces on the rails. This paper also presents a case of a railcar overturning when the train speed is greater than 2.5 times the design speed of a curved track segment.

Effect of Long-Term Bridge Deformations on Safe Operation of High-Speed Railway and Vibration of Vehicle–Bridge Coupled System

2019 ◽  
Vol 19 (09) ◽  
pp. 1950111 ◽  
Author(s):  
Hongye Gou ◽  
Longcheng Yang ◽  
Zhixiang Mo ◽  
Wei Guo ◽  
Xiaoyu Shi ◽  
...  
Keyword(s):  
High Speed ◽  
Measurement Data ◽  
Coupled System ◽  
Bridge Pier ◽  
Railway Track ◽  
Vertical Acceleration ◽  
High Speed Train ◽  
High Speed Trains ◽  
Track Deformation

Operation safety of high-speed trains is dependent on their vibration characteristics, which vary with bridge deformation. This paper studies the influence of bridge pier settlement and girder creep camber, which are two typical types of long-term bridge deformation, on the vibration of high-speed trains. To this end, an analytical approach is presented to link the bridge deformation with railway track deformation; the track deformation is used to analyze the vibration of the CRH2 high-speed train in China. The vibration analysis results are validated using the in-situ measurement data. The present study shows that bridge pier settlement greatly affects the vertical acceleration, derailment coefficient and wheel unloading rate of the high-speed train; incorporating bridge girder camber aggravates the vibration of the train–bridge system. The threshold of bridge pier settlement is suggested to be 11.1[Formula: see text]mm for trains moving at 350[Formula: see text]km/h with regard to the code-specified vibration limit. This study has significant implications for the design and operation of high-speed railways.

Natural Vibration Analysis of High-Speed Railway Slab Tracks under Rail Longitudinal Force

2013 ◽  
Vol 706-708 ◽  
pp. 1443-1449 ◽  
Author(s):  
Yi Shi Guo ◽  
Zu Jun Yu ◽  
Hong Mei Shi
Keyword(s):  
High Speed ◽  
Natural Vibration ◽  
Longitudinal Force ◽  
Frequency Equation ◽  
Railway Track ◽  
High Speed Railway ◽  
Slab Track ◽  
Specific Effects ◽  
Coupling Dynamics ◽  
Dynamics Problems

The slab track is the main structure of the high-speed railway track, the Inherent dynamic characteristics of which is of great significance to the research on the Vehicle-Track Coupling Dynamics. The assumptions of the modal function describing the natural vibration of the track is a necessary theoretical basis in analytic and numerical calculations for dynamics problems, which is more in accordance with the real situation, the more likely characteristic estimation are to be accurate. In this paper, with the method of combine matrix, the system characteristic equation of slab-track model is deduced, and the exact analytic formulas of frequency equation and modal function are obtained. Meanwhile the specific effects of the Rail longitudinal force on the vibration performance of the tracks are analyzed through instances. The results show that this approach is an effective analytic method, the solution of which is accurate. And the track parameters can be flexibly initialized, which is especially applicable for the condition of track parameters varying and longitudinal strain with distribution.

Influence of Construction of Railway Superstructure on Railway Quality

2014 ◽  
Vol 617 ◽  
pp. 54-59
Author(s):  
Libor Ižvolt ◽  
Jana Ižvoltová ◽  
Janka Šestáková
Keyword(s):  
High Speed ◽  
Railway Track ◽  
Track Geometry ◽  
Railway Tracks ◽  
Rail Vehicles ◽  
Operational Load ◽  
Safety And Reliability ◽  
Maintenance Work ◽  
The Cost

The operation of railway tracks is historically confirmed that the classic structure of the railway superstructure is capable to ensure operational capability of standard railway tracks for a relatively long period of time (railways tracks to speed of 160 km.h-1). Such a railway track and its track is considered the railway track with a classic structure of the railway superstructure, where track removal is stored in the ballast. In the case of high operating and axle load, increasing track speed and requirements for safety of operation, which are associated with high requirements on the track geometry, it appears that such structure has its operational (in terms of guaranteeing the long-term safety and reliability of the railway track) and economic (in terms of the cost of maintenance of railway track) limits. "Floating" placement of the track removal during each passage of a rail vehicle, or train leads to the growth of dynamic horizontal and vertical forces that cause gradual degradation of track geometry, what subsequently leads to restless journey of moving rail vehicles. Elimination of imperfections in track geometry - the quality of the railway track - forces the operators to remove such imperfections of railway track in time and financially consuming maintenance work in certain periods. However, it is sufficient if only the weakest element of classic railway superstructure is replaced in the railway, and it is the track ballast using other more appropriate component representing no elastic and plastic behaviour. The structure is such replacement, in which the track removal is concreted (monolithic structure) or stored on a concrete or asphalt bearing layer (layered structure), namely structural design, which is referred to as unconventional railway superstructure. The structure of railway superstructure is characterized by cross sleepers used in a modified shape or they are not part of it at all. Currently, thus conceived railway track is referred to as a slab track (hereinafter referred to as the "ST"), which requires flexibility of the railway superstructure for the system of the wheel/rail secured using elastic elements disposed between the rail and the sleeper and/or under the sleeper. In general, the structure of ST has been currently applied mainly to high-speed track and the tracks that have high operational load, where the cost of maintaining the track with the classic structure of the railway superstructure strongly grows. At the same time, however, this structure also promotes in the upgraded sections of the standard tracks (track speed to 160 km.h-1), especially in track sections conducted in tunnels, as there are located the required properties of the ballast that do not demonstrate subsidence. The subgrade without a drop also offers for application of the ST structure bridges, and therefore, the application of this structure is also possible in these track sections.

Sign in / Sign up

Export Citation Format

Share Document