scholarly journals Reduction of Carbon Dioxide to Give Unstable Carbon Oxides. An Attempt of Capture of Unstable Carbon Oxides Formed by the Reduction of Carbon Dioxide with Benzoin Carbanion Using Phenyliodonium Bis(phenylsulfonyl)methylide

1991 ◽  
Vol 64 (6) ◽  
pp. 2016-2018 ◽  
Author(s):  
Fuminori Akiyama
Keyword(s):  
1934 ◽  
Vol 10 (6) ◽  
pp. 743-758 ◽  
Author(s):  
E. H. Boomer ◽  
H. E. Morris

Numerous experiments have been carried out on the decomposition of alcohol, alcohol and water, and alcohol and carbon dioxide mixtures over poly-component catalysts at temperatures up to 500 °C. Quantitative data on the gaseous and the liquid products were obtained. The properties of the poly-component catalysts, as evidenced by the simple primary and secondary reactions, have been shown to be qualitatively those of the single components.Methane can be produced in one or more of several secondary reactions, namely, the decomposition of acetaldehyde, the hydrogenation of carbon oxides and the decomposition of ethylene. Ethane can be produced in one or both of two reactions consisting of auto-oxidation and reduction of the alcohol, or the secondary hydrogenation of ethylene, confirming previous work. Carbon dioxide, in most cases, is formed as a result of the water-gas reaction and the decomposition of carbon monoxide. In other cases its origin is obscure. The results of certain experiments in which carbon dioxide and hydrogen were the major constituents of the off-gas cannot be explained in the same way. Reactions involving ketene decomposition and polymerization, and hydration of alcohol, have been suggested as possible explanations.


Author(s):  
R. R. Baker

AbstractFlue-cured Virginia tobacco has been heated in nitrogen and nitrogen/oxygen mixtures under flow conditions, and the rate of formation of carbon monoxide and carbon dioxide has been determined as a function of temperature, heating rate, and proportion of oxygen in the gas. When the tobacco is heated in nitrogen at heating rates comparable to those in a smouldering cigarette, 27 % of the carbon content of the tobacco is converted to carbon oxides. Both carbon oxides show two distinct formation regions: a low-temperature region (about 100°-450°C), and a high-temperature region (about 550°-900°C). These temperature limits are almost identical to those predicted from studies on the combustion coal of a cigarette burning in air. When tobacco, or the carbonaceous residue remaining after the pyrolysis experiments, is heated in nitrogen / oxygen mixtures, the total amount of carbon converted to carbon monoxide and carbon dioxide is independent of heating rate, but the relative proportions of the two oxides are strongly dependent on heating rate. At the lower heating rate, proportionally less carbon monoxide, and more carbon dioxide, is produced. Under oxidation conditions, about 70 % of both carbon oxides formed in the low-temperature region (100°-450°C) are produced by tobacco decomposition reactions, whereas in the high-temperature region about 10-20 % of the carbon monoxide, and 2-9 % of the carbon dioxide, are produced by tobacco decomposition.


2021 ◽  
Vol 50 (10) ◽  
pp. 3523-3528
Author(s):  
Qiu Sun ◽  
Constantin G. Daniliuc ◽  
Gerald Kehr ◽  
Gerhard Erker

The ethylene-bridged frustrated Lewis pair, formed by hydroboration of the Mes*P(H)-vinyl phosphane with Piers' borane [HB(C6F5)2], reacted with the CO/ HB(C6F5)2 pair and also with carbon dioxide.


2014 ◽  
Author(s):  
W. L. Becker ◽  
R. J. Braun ◽  
M. Penev

The natural gas distribution infrastructure is well developed in many countries, enabling the fuel to be transported long distances via pipelines and easily delivered throughout cities. Using the existing pipeline to transport renewably generated synthetic natural gas (SNG) can leverage the value of the product. While the price of natural gas is near record lows in the United States, many other countries are working to develop SNG as an alternative fuel for transportation markets, especially in Europe and for island nations. This study presents an SNG plant design and evaluates its performance for producing SNG by reacting renewably generated hydrogen with carbon dioxide. The carbon dioxide feedstock is assumed to be captured and scrubbed from an existing coal fired power plant at the city-gate, where the SNG plant is co-located. Historically, methanation has been a common practice for eliminating carbon monoxide and carbon dioxide in various chemical processes such as ammonia production and natural gas purification; for these processes, only small amounts (1–3% molar basis) of carbon oxides need to be converted to methane. A “bulk” methanation process is unique due to the high concentration of carbon oxides and hydrogen. In addition, the carbon dioxide is the only carbon source, and the reaction characteristics of carbon dioxide are much different than carbon monoxide. Thermodynamic and kinetic considerations of the methanation reaction are explored to model and simulate a system of reactors for the conversion of hydrogen and carbon dioxide to SNG. Multiple reactor stages are used to increase temperature control of the reactor and drain water to promote the forward direction of the methanation reaction. Heat recuperation and recovery using organic Rankine cycle units for electricity generation utilizes the heat produced from the methanation reaction. Bulk recycle is used to increase the overall reactant conversion while allowing a satisfactorily high methane content SNG product. A hydrogen membrane separates hydrogen for recycle to increase the Wobbe index of the product SNG by increasing the methane content to nearly 93% by volume. The product SNG has a Wobbe index of 47.5 MJ/m3 which is acceptable for natural gas pipeline transport and end-use appliances in the existing infrastructure. The overall plant efficiency is shown to be 78.1% HHV and 83.2% LHV. The 2nd Law efficiency for the SNG production plant is 84.1%.


Author(s):  
K. C. Tsou ◽  
J. Morris ◽  
P. Shawaluk ◽  
B. Stuck ◽  
E. Beatrice

While much is known regarding the effect of lasers on the retina, little study has been done on the effect of lasers on cornea, because of the limitation of the size of the material. Using a combination of electron microscope and several newly developed cytochemical methods, the effect of laser can now be studied on eye for the purpose of correlating functional and morphological damage. The present paper illustrates such study with CO2 laser on Rhesus monkey.


Author(s):  
Charles TurnbiLL ◽  
Delbert E. Philpott

The advent of the scanning electron microscope (SCEM) has renewed interest in preparing specimens by avoiding the forces of surface tension. The present method of freeze drying by Boyde and Barger (1969) and Small and Marszalek (1969) does prevent surface tension but ice crystal formation and time required for pumping out the specimen to dryness has discouraged us. We believe an attractive alternative to freeze drying is the critical point method originated by Anderson (1951; for electron microscopy. He avoided surface tension effects during drying by first exchanging the specimen water with alcohol, amy L acetate and then with carbon dioxide. He then selected a specific temperature (36.5°C) and pressure (72 Atm.) at which carbon dioxide would pass from the liquid to the gaseous phase without the effect of surface tension This combination of temperature and, pressure is known as the "critical point" of the Liquid.


2001 ◽  
Vol 7 (7) ◽  
pp. 789-796 ◽  
Author(s):  
L. H. Ziska ◽  
O. Ghannoum ◽  
J. T. Baker ◽  
J. Conroy ◽  
J. A. Bunce ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document