Experimental Investigation on the Limitation of Axial Load Level of RC Columns in Seismic Regions

2006 ◽  
Vol 9 (3) ◽  
pp. 349-359 ◽  
Author(s):  
Jianzhuang Xiao ◽  
Ch. Zhang
Keyword(s):  
Experimental Investigation ◽  
Axial Load ◽  
Load Level ◽  
Rc Columns ◽  
Seismic Regions

EFFECT OF ASPECT RATIO ON THE BEHAVIOR OF GFRP-RC CIRCULAR COLUMNS UNDER SIMULATED SEISMIC LOADING

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Amr Elsayed Mohammed Abdallah ◽  
Ehab Fathy El-Salakawy
Keyword(s):  
Aspect Ratio ◽  
Axial Load ◽  
Load Capacity ◽  
Load Level ◽  
Experimental Results ◽  
Rc Columns ◽  
Drift Capacity ◽  
Glass Fiber Reinforced ◽  
Axial Load Capacity ◽  
Code Provisions

The mechanical and physical properties of glass fiber-reinforced polymer (GFRP) reinforcement are different from steel, which requires independent code provisions for GFRP-reinforced concrete (RC) members. The currently available code provisions for GFRP-RC members still need more research evidence to be inclusive. For example, the available provisions for confinement reinforcement of FRP-RC columns do not consider the effects of column aspect ratio, which is not yet supported by any available research data. In this study, two full-scale spirally reinforced GFRP-RC circular columns were constructed and tested under concurrent seismic and axial loads. Both specimens had an aspect ratio (shear span-to-diameter ratio) of 7.0, while other two specimens with an aspect ratio of 5.0, from a previous stage of this study, were included for comparison purposes. For each aspect ratio, each specimen was loaded under one of two levels of axial load; 20 or 30% of the axial load capacity of the column section. All test specimens had a 35 MPa concrete compressive strength, 350-mm diameter, 85-mm spiral pitch and 1.2% longitudinal reinforcement ratio. The experimental results were analyzed in terms of hysteretic response, drift capacity and inelastic deformability hinge length. Based on the experimental results, it can be concluded that the aspect ratio affects the magnitude of secondary moments and inelastic deformability hinge length. In addition, the aspect ratio may affect drift capacity of GFRP-RC columns, depending on axial load level.

Experimental investigation of damaged square short RC columns with low slenderness retrofitted by CFRP strips under axial load

Structures ◽  
2020 ◽  
Vol 28 ◽  
pp. 170-180 ◽  
Author(s):  
Rahim Ghoroubi ◽  
Ömer Mercimek ◽  
Anıl Özdemir ◽  
Özgür Anil
Keyword(s):  
Experimental Investigation ◽  
Axial Load ◽  
Rc Columns

Experimental Investigation of Stiffened Square CFST Columns under Axial Load

2014 ◽  
Vol 919-921 ◽  
pp. 1794-1800
Author(s):  
Xin Zhi Zheng ◽  
Xin Hua Zheng
Keyword(s):  
Experimental Investigation ◽  
Bearing Capacity ◽  
Cross Sections ◽  
Axial Load ◽  
Local Buckling ◽  
Test Results ◽  
Tubular Columns ◽  
Economical Benefit ◽  
Steel Consumption ◽  
Cfst Columns

Abstract: 7 square steel tubular columns were tested to discuss the ultimate axial bearing capacity, ductility performance and the steel consumption under stiffened by steel belts and binding bars of different cross-sections. Test results indicate that only by increasing fewer amounts of steel usage, stiffened square CFST columns with binding bars can not only improve the overall effects of restraint and alleviate regional local buckling between the binding bars, but also improve the bearing capacity of concrete filled square steel tubular columns. The utility benefits and the economical benefit is considerable, deserving extensive use.

scholarly journals The seismic performance of steel encased reinforced concrete bridge piles

1983 ◽  
Vol 16 (2) ◽  
pp. 123-140
Author(s):  
R. J. T. Park ◽  
M. J. N. Priestley ◽  
W. R. Walpole
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Theoretical Investigation ◽  
Axial Load ◽  
Lateral Displacement ◽  
Load Level ◽  
Concrete Bridge ◽  
Reinforced Concrete Bridge ◽  
Outside Diameter ◽  
Good Agreement

An experimental and theoretical investigation into the seismic performance of steel encased reinforced concrete bridge piles is described. Six test units were designed, constructed and tested
under cyclic lateral displacement-controlled loading. The units had
an outside diameter of 360 mm and a steel casing thickness of 5 mm. Variables included the axial load level, inclusion or exclusion of internal reinforcing cages, and the influence of the casing continuity at he critical flexural sections. Sound seismic performance was observed in all of the models and good agreement between predicted and observed ultimate behaviour was obtained.

scholarly journals The Proposition of an EI Equation of Square and L–Shaped Slender Reinforced Concrete Columns under Combined Loading

2021 ◽  
Vol 11 (3) ◽  
pp. 7100-7106
Author(s):  
L. Hamzaoui ◽  
T. Bouzid
Keyword(s):  
Reinforced Concrete ◽  
Axial Load ◽  
Concrete Strength ◽  
Linear Regression Analysis ◽  
Strain Curve ◽  
Load Level ◽  
Combined Loading ◽  
Actual Behavior ◽  
Factors Affecting ◽  
Slender Columns

The stability and strength of slender Reinforced Concrete (RC) columns depend directly on the flexural stiffness EI, which is a major parameter in strain calculations including those with bending and axial load. Due to the non-linearity of the stress-strain curve of concrete, the effective bending stiffness EI always remains variable. Numerical simulations were performed for square and L-shaped reinforced concrete sections of slender columns subjected to an eccentric axial force to estimate the variation of El resulting from the actual behavior of the column, based on the moment-curvature relationship. Seventy thousand (70000) hypothetical slender columns, each with a different combination of variables, were used to investigate the main variables that affect the EI of RC slender columns. Using linear regression analysis, a new simple and linear expression of EI was developed. Slenderness, axial load level, and concrete strength have been identified as the most important factors affecting effective stiffness. Finally, the comparison between the results of the new equation and the methods proposed by ACI-318 and Euro Code-2 was carried out in connection with the experimental results of the literature. A good agreement of the results was found.

SEISMIC PERFORMANCE OF GFRP-RC RECTANGULAR COLUMNS: NUMERICAL STUDY

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Ehab El-Salakawy ◽  
Fangxin Ye ◽  
Yasser Mostafa Selmy
Keyword(s):  
Reinforced Concrete ◽  
Cyclic Loading ◽  
Axial Load ◽  
Numerical Study ◽  
Concrete Strength ◽  
Weight Ratio ◽  
Concrete Columns ◽  
Load Level ◽  
Reinforced Concrete Columns ◽  
Rectangular Columns

Composite materials like glass fiber-reinforced polymer (GFRP) is becoming widely acceptable to be used as a reinforcing material due to its high ultimate tensile strength-to-weight ratio and excellent resistance to corrosion. However, the seismic behavior of GFRP-reinforced concrete columns has not been fully investigated yet. This paper presents the results of a numerical analysis of full-size GFRP-RC rectangular columns under cyclic loading. The simulated column depicts the lower part of a building column between the foundation and the point of contra-flexure at the mid-height of the column. GFRP reinforcement properties and concrete modeling based on fracture energy have been incorporated in the numerical model. Experimental validation has been used to examine the accuracy of the constructed finite element models (FEMs) using a commercially available software. The validated FEM was used to perform a parametric study, considering several concrete strength values and axial load levels, to study its influence on the performance of the GFRP-reinforced concrete columns under cyclic loading. It was concluded that the hysteretic dissipation capacity deteriorates under high axial load level due to severe softening of the concrete. The FE results showed a substantial improvement of the lateral load-carrying capacities by increasing concrete compressive strength.

Sign in / Sign up

Export Citation Format

Share Document