scholarly journals STUDY OF COMPOSITE TECHNOLOGIES GLASS FIBER BASALT ASPHALT MIXTURES TAKING INTO ACCOUNT THE INFLUENCE OF TEMPERATURE REGIME

2016 ◽  
Vol 2 (1) ◽  
pp. 134-137
Author(s):  
Андронов ◽  
Sergey Andronov
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Uniform Distribution ◽  
Temperature Regime ◽  
Asphalt Concrete ◽  
Physical And Mechanical Properties ◽  
Structural Member ◽  
Asphalt Mixtures ◽  
Basalt Fibers ◽  
Influence Of Temperature

Asphalt concrete exposed to cracking, flaking, chipping, formation of ruts, waves and troughs. Introduction into a mixture of small size (discrete) components allows achieving their uniform distribution (dispersion) in the mixture and obtain a "composite" material having a high physical and mechanical properties in the finished structural member. Studied technology of composite dispersion-reinforced with basalt fibers asphalt mixtures, taking into account the influence of temperature.

scholarly journals Effects of Different Types of Fibers on the Physical and Mechanical Properties of MICP-Treated Calcareous Sand

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 268
Author(s):  
Jitong Zhao ◽  
Huawei Tong ◽  
Yi Shan ◽  
Jie Yuan ◽  
Qiuwang Peng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Glass Fiber ◽  
Physical And Mechanical Properties ◽  
Polyester Fiber ◽  
Engineering Properties ◽  
Fiber Types ◽  
Calcite Precipitation ◽  
Calcareous Sand ◽  
Hemp Fiber

Microbial-induced calcite precipitation (MICP) has been a promising method to improve geotechnical engineering properties through the precipitation of calcium carbonate (CaCO3) on the contact and surface of soil particles in recent years. In the present experiment, water absorption and unconfined compressive strength (UCS) tests were carried out to investigate the effects of three different fiber types (glass fiber, polyester fiber, and hemp fiber) on the physical and mechanical properties of MICP-treated calcareous sand. The fibers used were at 0%, 0.10%, 0.15%, 0.20%, 0.25%, 0.30%, 0.35%, and 0.40% relative to the weight of the sand. The results showed that the failure strain and ductility of the samples could be improved by adding fibers. Compared to biocemented sand (BS), the water absorption of these three fiber-reinforced biocemented sands were, respectively, decreased by 11.60%, 21.18%, and 7.29%. UCS was, respectively, increased by 24.20%, 60.76%, and 6.40%. Polyester fiber produced the best effect, followed by glass fiber and hemp fiber. The optimum contents of glass fiber and polyester fiber were 0.20% and 0.25%, respectively. The optimum content of hemp fiber was within the range of 0.20–0.25%. Light-emitting diode (LED) microscope and scanning electron microscope (SEM) images lead to the conclusion that only a little calcite precipitation had occurred around the hemp fiber, leading to a poor bonding effect compared to the glass and polyester fibers. It was therefore suggested that polyester fiber should be used to improve the properties of biocemented sand.

Experimental investigation of the mechanical behavior of glass fiber/high fluidity polyamide-based composites for automotive market

2021 ◽  
pp. 073168442110140
Author(s):  
Hossein Ramezani-Dana ◽  
Moussa Gomina ◽  
Joël Bréard ◽  
Gilles Orange
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Mechanical Performance ◽  
Physical And Mechanical Properties ◽  
Ultimate Strain ◽  
Uniaxial Tensile ◽  
Compression Tests ◽  
Automotive Market ◽  
Glass Fiber Reinforced ◽  
Glass Fiber Reinforcement

In this work, we examine the relationships between the microstructure and the mechanical properties of glass fiber–reinforced polyamide 6,6 composite materials ( V f = 54%). These materials made by thermocompression incorporate different grades of high fluidity polyamide-based polymers and two types of quasi-UD glass fiber reinforcement. One is a classic commercial fabric, while the other specially designed and manufactured incorporates weaker tex glass yarns (the spacer) to increase the planar permeability of the preform. The effects of the viscosity of the polymers and their composition on the wettability of the reinforcements were analyzed by scanning electron microscopy observations of the microstructure. The respective influences of the polymers and the spacer on the mechanical performance were determined by uniaxial tensile and compression tests in the directions parallel and transverse to the warp yarns. Not only does the spacer enhance permeability but it also improves physical and mechanical properties: tensile longitudinal Young’s modulus increased from 38.2 GPa to 42.9 GPa (13% growth), tensile strength increased from 618.9 MPa to 697 MPa (3% growth), and decrease in ultimate strain from 1.8% to 1.7% (5% reduction). The correlation of these results with the damage observed post mortem confirms those acquired from analyses of the microstructure of composites and the rheological behaviors of polymers.

Physical and Mechanical Properties of the Road Surface when Replacing the Finely Crushed Mineral Part of Asphalt Concrete with Porcelain Stoneware Production Waste

2021 ◽  
Vol 1043 ◽  
pp. 101-107
Author(s):  
Natalia Yatsenko ◽  
Alexandr Evforitsky ◽  
Natalya Kotenko
Keyword(s):  
Mechanical Properties ◽  
Asphalt Concrete ◽  
Water Resistance ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Type B ◽  
Grain Composition ◽  
The Road ◽  
Concrete Mixtures ◽  
Additional Hydrogen

The possibility of using waste porcelain stoneware - a high-strength non-porous, dense material as a finely crushed mineral part of asphalt concrete with 0-5 mm fraction has been established. The adhesive additive Bitaden content was revealed, that intensifies porcelain stoneware interaction with bitumen due to the additional hydrogen bonds formation, the particles’ contact plane activation with the action of van der Waals forces. The conditions for obtaining asphalt concrete mixtures of type B, grade 1 and G, grade 2 of the optimal grain composition with a reduced content of BND 60/90 bitumen have been developed. Physical and mechanical properties are characterized by an increase in the water resistance of asphalt concrete samples based on porcelain stoneware, compressive strength and shear resistance.

Study of the influence of the efficiency of application of asphalt concrete reinforced by basaltic fiber

2021 ◽  
Vol 2021 ◽  
pp. 117-128
Author(s):  
Artur Onyshchenko ◽  
◽  
Mykola Garkusha ◽  
Oleksandr Fedorenko ◽  
Yevgen Plazii ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Asphalt Concrete ◽  
Materials Science ◽  
Shape Change ◽  
Construction Materials ◽  
Basalt Fiber ◽  
Physical And Mechanical Properties ◽  
Operating Conditions ◽  
Concrete Mix ◽  
The Impact

Introduction. Increasing the load on highways and constantly increasing the intensity of traffic requires the use of road construction materials with improved physical and mechanical properties. Asphalt concrete is one of the most common and effective materials, which allows to provide the necessary strength and durability of the pavement structure. However, the use of traditional materials for its preparation - mineral material and road bitumen has a limited resource, which does not always meet traffic conditions. Modern scientific research in materials science allows to use mixtures of asphalt concrete and asphalt concrete road with the use of basalt fiber.Apply mixtures of asphalt concrete and asphalt concrete road with the use of basalt fiber, allows to increase the mechanical characteristics - tensile strength and resistance to fatigue from repeated loads, which increases the crack resistance of asphalt concrete layers of pavement structures, as well as increases resistance to shape change. accumulation of residual deformations.Problem Statement. From the literature analysis it is established that the coating of non-rigid pavement is in difficult operating conditions, which is confirmed by the intensive growth of defects in the form of tracks, landslides, inflows, cracks, due to increasing parameters of transport loads and high summer temperatures, so there is a need new materials.Purpose. Is to study the impact of the effectiveness of asphalt concrete reinforced with basalt fiber.Results. The results of physical and mechanical properties of asphalt concretes with the use of basalt fiber are obtained. The results of formation of residual deformations in the form of track in asphalt concrete with the use of basalt fiber are obtained. As a result of the conducted researches the analysis of efficiency of application of basalt fiber in asphalt concrete mix is executed.On the basis of the carried-out researches the basic requirements to asphalt concrete mix with use of basalt fiber are establishedConclusions. The research results were used in the development of regulations for the design, construction and repair of asphalt layers of roads in Ukraine.Keywords: asphalt concrete road with basalt fiber, asphalt concrete mixes with basalt fiber, loading, covering, stability, temperature.

Sign in / Sign up

Export Citation Format

Share Document