315 Study of micro-machining process with ultrasonic cavitation : Discussion of machining characteristics

2001 ◽  
Vol 2001.3 (0) ◽  
pp. 95-96
Author(s):  
Hitomi YAMAGUCHI ◽  
Takeo SHINMURA
Keyword(s):  
Ultrasonic Cavitation ◽  
Machining Process ◽  
Micro Machining ◽  
Machining Characteristics

Multi-Material Capability of Laser Induced Plasma Micromachining

2014 ◽  
Author(s):  
Ishan Saxena ◽  
Kornel Ehmann
Keyword(s):  
Laser Ablation ◽  
Metal Cutting ◽  
Medical Engineering ◽  
Machining Process ◽  
Micro Machining ◽  
Promising Alternative ◽  
Laser Induced Plasma ◽  
Direct Laser ◽  
Micro Features ◽  
Machining Characteristics

Presently surface micro-texturing has found many promising applications in the fields of tribology, bio-medical engineering, metal cutting, and other functional or topographical surfaces. Most of these applications are material-specific, which necessitates the need for a texturing and machining process that surpasses the limitations posed by a certain class of materials that are difficult to process by laser ablation, owing to their optical or other surface or bulk characteristics. Laser Induced Plasma Micromachining (LIPMM) has emerged as a promising alternative to direct laser ablation for micro-machining and micro-texturing, which offers superior machining characteristics while preserving the resolution, accuracy and tool-less nature of laser ablation. This study is aimed at understanding the capability of LIPMM process to address some of the issues faced by pulsed laser ablation in material processing. This paper experimentally demonstrates machining of optically transmissive, reflective and rough surface materials using LIPMM. Apart from this, the study includes machining of conventional metals (Nickel and Titanium) and polymer (Polyimide), to demonstrate higher obtainable depth and reduced heat affected distortion around micro-features machined by LIPMM, as compared to laser ablation.

416 Study on micro-machining process applying ultrasonic cavitation

2000 ◽  
Vol 2000.35 (0) ◽  
pp. 148-149
Author(s):  
Takeo SHINMURA ◽  
Hitomi YAMAGUCHI ◽  
Kenichirou KASAI ◽  
Toshio AIZAWA
Keyword(s):  
Ultrasonic Cavitation ◽  
Machining Process ◽  
Micro Machining

Challenges and Issues in the Design of Micro-Machined Antennas - A Review

2020 ◽  
Vol 13 ◽  
Author(s):  
Ashish Kumar ◽  
Amar Partap Singh Pharwaha
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Substrate Material ◽  
Review Article ◽  
High Index ◽  
Performance Characteristics ◽  
Machining Process ◽  
Patch Antennas ◽  
Micro Machining ◽  
The Impact

Background: Patch antennas are composed of the substrate material with patch and ground plane on the both sides of the substrate. The dimensions and performance characteristics of the antenna are highly influenced by the choice of the appropriate substrate depending upon the value of their dielectric constant. Generally, low index substrate materials are used to design the patch antenna but there are also some of the applications, which require the implementation of patch antenna design on high index substrate like silicon and gallium arsenide. Objective: The objective of this article is to review the design of antennas developed on high index substrate and the problems associated with the use of these materials as substrate. Also, main challenges and solutions have been discussed to improve the performance characteristics while using the high index substrates. Method: The review article has divided into various sections including the solution of the problems associated with the high index substrates in the form of micro-machining process. Along with this, types of micro machining and their applications have discussed in detail. Results: This review article investigates the various patch antennas designed with micro-machining technology and also discusses the impact of micro-machining process on the performance parameters of the patch antennas designed on high index substrates. Conclusion: By using the micro-machining process, the performance of patch antenna improves drastically but fabrication and tolerances at such minute structures is very tedious task for the antenna designers.

Study of micro machining characteristics by Nd-YAG Laser on NiTinol shape memory alloy

2021 ◽  
pp. 1-15
Author(s):  
Subhadip Pradhan ◽  
Piyush Bhusan Dash ◽  
Kanchan Kumari ◽  
Debabrata Dhupal
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Micro Machining ◽  
Yag Laser ◽  
Machining Characteristics

Marathon für kleinen Bohrer

VDI-Z ◽  
2019 ◽  
Vol 161 (Special-II) ◽  
pp. 38-39
Keyword(s):  
Machining Process ◽  
Micro Machining

Damit die Firma Werner Rau hohen Qualitätsansprüchen gerecht werden kann, setzt der Geschäftsführer auf Werkzeuge von Fritz Hartmann Präzisionswerkzeuge – mit Erfolg: Bei der Bearbeitung mehrerer Druckplatten mit je 38 000 Bohrungen stellte ein 3 mm-Spiralbohrer mit MMP (Micro Machining Process)- Technologie von HAM seine Präzision seine Qualität vorbildlich unter Beweis.

scholarly journals On the Application of Impeller in Multi Axis CNC Machine Tools

2021 ◽  
Vol 2066 (1) ◽  
pp. 012113
Author(s):  
Weiwen Ye
Keyword(s):  
Machine Tool ◽  
Machine Tools ◽  
Complex Surface ◽  
Machining Process ◽  
Cnc Machine Tools ◽  
Cnc Machine Tool ◽  
Cnc Machine ◽  
Surface Processing ◽  
The Third ◽  
Machining Characteristics

Abstract Multi axis CNC machine tool has good linkage processing effect. Through the application of integral impeller in CNC machine tools, to improve the adaptability of CNC machine tools to complex surface processing parts, to improve the accuracy of multi axis CNC machine tools. The first part of this paper introduces the integral impeller and its machining characteristics; the second part introduces the basic NC machining process of integral impeller; the third part discusses the application of impeller in multi axis CNC machine tools from the creation of guide track, the simulation of integral impeller, software processing and generation. The purpose is to provide some reference for the processing and production of integral impeller.

scholarly journals Micro Machining Process Selection: An Integrated Theory

2016 ◽  
Vol 25 ◽  
pp. 862-868 ◽  
Author(s):  
Sandeep Kuriakose ◽  
Anil Varghese Mangalan ◽  
Babu Namboothiri ◽  
Amitava Ray
Keyword(s):  
Machining Process ◽  
Micro Machining ◽  
Process Selection ◽  
Integrated Theory

A Study of Abrasive Jet Micro-Grooving of Quartz Crystals

2010 ◽  
Vol 443 ◽  
pp. 645-651 ◽  
Author(s):  
Alireza Moridi ◽  
Jun Wang ◽  
Yasser M. Ali ◽  
Philip Mathew ◽  
Xiao Ping Li
Keyword(s):  
Predictive Models ◽  
Deep Understanding ◽  
Machining Process ◽  
Micro Machining ◽  
Machining Performance ◽  
Quartz Crystals ◽  
Abrasive Jet Machining ◽  
Model Predictions ◽  
Micro Grooving ◽  
Good Agreement

Owing to its various distinct advantages over the other machining technologies, abrasive jet machining has become a promising machining technology for brittle and hard-to-machine materials. An experimental study is presented on the micro-grooving of quartz crystals using an abrasive airjet. The effect of the various process parameters on the major machining performance measures are analysed to provide a deep understanding of this micro-machining process. Predictive models are then developed for quantitatively estimating the machining performance. The models are finally verified by an experiment. It shows that the model predictions are in good agreement with the experimental results under the corresponding conditions.

Machining Characteristics Estimation in WEDM Process While Machining Titanium Grade-2 Material Using ANN

2020 ◽  
Author(s):  
Prathik Jain Sudhir ◽  
Ravindra Holalu Venkatadas ◽  
Ugrasen Gonchikar
Keyword(s):  
Process Parameters ◽  
Machining Process ◽  
Electrode Wear ◽  
Training Set ◽  
Hard Materials ◽  
Titanium Grade ◽  
Pulse On Time ◽  
Pulse Off Time ◽  
Wedm Process ◽  
Machining Characteristics

Abstract Wire Electrical Discharge Machining (WEDM) provides an effective solution for machining hard materials with intricate shapes. WEDM is a specialized thermal machining process is capable to accurately machining parts of hard materials with complex shapes. However, selection of process parameters for obtaining higher machining efficiency or accuracy in wire EDM is still not fully solved, even with the most up-to-date CNC WED machine. The study presents the machining of Titanium grade 2 material using L’16 Orthogonal Array (OA). The process parameters considered for the present work are pulse on time, pulse off time, current, bed speed, voltage and flush rate. Among these process parameters voltage and flush rate were kept constant and the other four parameters were varied for the machining. Molybdenum wire of 0.18mm is used as the electrode material. Titanium is used in engine applications such as rotors, compressor blades, hydraulic system components and nacelles. Its application can also be found in critical jet engine rotating and airframes components in aircraft industries. Firstly optimization of the process parameters was done to know the effect of most influencing parameters on machining characteristics viz., Surface Roughness (SR) and Electrode Wear (EW). Then the simpler functional relationship plots were established between the parameters to know the possible information about the SR and EW. This simpler method of analysis does not provide the information on the status of the material and electrode. Hence more sophisticated method of analysis was used viz., Artificial Neural Network (ANN) for the estimation of the experimental values. SR and EW parameters prediction was carried out successfully for 50%, 60% and 70% of the training set for titanium material using ANN. Among the selected percentage data, at 70% training set showed remarkable similarities with the measured value then at 50% and 60%.

An Experimental Study of the Abrasive Water Jet Micro-Machining Process for Quartz Crystals

2012 ◽  
Vol 565 ◽  
pp. 339-344 ◽  
Author(s):  
H. Qi ◽  
J.M. Fan ◽  
Jun Wang
Keyword(s):  
Experimental Study ◽  
Removal Rate ◽  
Water Jet ◽  
Machining Process ◽  
Bottom Surface ◽  
Micro Machining ◽  
Abrasive Water Jet ◽  
Process Variables ◽  
Jet Impact ◽  
Micro Channels

An experimental study of the machining process for micro-channels on a brittle quartz crystal material by an abrasive slurry jet (ASJ) is presented. A statistical experiment design considering the major process variables is conducted, and the machined surface morphology and channelling performance are analysed to understand the micro-machining process. It is found that a good channel top edge appearance and bottom surface quality without wavy patterns can be achieved by employing relatively small particles at shallow jet impact angles. The major channel performance measures, i.e. material removal rate (MRR) and channel depth, are then discussed with respect to the process parameters. It shows that with a proper control of the process variables, the abrasive water jet (AWJ) technology can be used for the micro-machining of brittle materials with high quality and productivity.

Sign in / Sign up

Export Citation Format

Share Document