scholarly journals Restricting the rights of construction process participants on the basis of pandemic legislation in Poland

2020 ◽  
pp. 85-102
Author(s):  
Maciej Kruś
Keyword(s):  
Construction Process

Development and Application of Quality Control System for Highway Subgrade Construction

2019 ◽  
Vol 2 (5) ◽  
Author(s):  
Tong Wang
Keyword(s):  
Quality Control ◽  
Real Time ◽  
Detection Method ◽  
System Development ◽  
Effective Control ◽  
Construction Process ◽  
Development Mode ◽  
The Road ◽  
Whole Process

The compaction quality of the subgrade is directly related to the service life of the road. Effective control of the subgrade construction process is the key to ensuring the compaction quality of the subgrade. Therefore, real-time, comprehensive, rapid and accurate prediction of construction compaction quality through informatization detection method is an important guarantee for speeding up construction progress and ensuring subgrade compaction quality. Based on the function of the system, this paper puts forward the principle of system development and the development mode used in system development, and displays the development system in real-time to achieve the whole process control of subgrade construction quality.

Formation Of An Estimate For A State Contract With A Firm Price In The Construction Sector

2020 ◽  
pp. 47-57
Keyword(s):  
Construction Projects ◽  
Cost Of Capital ◽  
Federal Budget ◽  
The State ◽  
Structural Elements ◽  
Construction Sector ◽  
Construction Process ◽  
Practical Application ◽  
Stage Of Development ◽  
Capital Construction

The issues of determining the estimated cost of capital construction projects with the involvement of Federal budget funds at the stage of development of project documentation, during verification of the accuracy of determining the estimated cost and the initial (maximum) contract price are considered. On the basis of the assessment of amendments to urban planning legislation for the purpose of implementing a state contract by the contractor ( based on the results of competitive procedures or without competitive procedures by decision of state authorities), the procedure for forming the estimate as part of a state (municipal) contract, the price of which is firm, is presented. For the purpose of mutual settlements between the customer and the contractor for the work performed, the formation of primary accounting documentation, as well as for checking the work performed by regulatory authorities, an example of drawing up an estimate of the state (municipal) contract on the basis of grouping costs according to structural elements and complexes of work is given. The result of the research conducted was the development of regulations and the formation of criteria for their practical application by state bodies, institutions, organizations and other participants in the investment-construction process, as well as recipients of budget funds, who perform the functions of the state (municipal) customer, developer and technical customer.

IMAJINASI KE IMAJINASI VISUAL FOTOGRAFI

2017 ◽  
Vol 12 (2) ◽  
pp. 91
Author(s):  
Edial Rusli
Keyword(s):  
Creative Process ◽  
Single Unit ◽  
Digital Images ◽  
Visual Image ◽  
Construction Process ◽  
Multiple Images ◽  
Artistic Process ◽  
Visual Imagination ◽  
Human Thought ◽  
The Media

AbstrakImaji visual fotografi merupakan media rekam visual yang objektif dan representatifkebenarannya dalam merekam suatu realitas. Revolusi teknologi menyebabkan perubahandari teknologi fotografi analog sebagai salah satu media yang menyatakan kebenaran ataubukti dan sebagai media yang representatif kebenarannya ke teknologi digital yang dapatmemungkinkan untuk merekayasa gambar digital melalui perangkat lunak. Teknologi digitaltelah menjadikan kebenaran dalam sebuah foto tidak lagi absolut. Akhirnya fotografi sebagaialat perekam imaji yang representatif kebenarannya semakin diragukan. Karena semakin sulituntuk membedakan foto asli atau palsu, bahkan sebuah foto asli bisa saja dikatakan sebagaihasil manipulasi. Penciptaan imajinasi visual fotografi ini dihasilkan dari suatu olah daya pikirmanusia. Dalam proses tersebut dibutuhkan suatu kreativitas dari penggabungan imaji-imajisebelumnya atau sekarang ini untuk diimajinasikan. Pemaknaan akan bergeser dari imaji visualfotografi menjadi imaji visual fotografi yang baru. Proses artistik imajinasi visual ini diciptakandengan didasarkan pada artistik yang berdasarkan imajinasi, artistik berdasarkan imajinasi danartistik didasarkan pada kombinasi antara kenyataan dan imajinasi. Penciptaan Imajinasi visualfotografi merupakan daya untuk mengonstruksi ataau menggabungkan kembali dari berbagaiimaji-imaji atau foto- secara imajinatif dan kreatif dengan persepsi yang menyertainya untukmenjadi imaji baru yang utuh, logis, dan mungkin terjadi dengan menggunakan teknik danefek fotografi. Proses mengonstruksi membutuhkan suatu kemampuan berimajinasi untukmenggabungkan dan menyatukannya untuk menjadi satu kesatuan (unity) yang utuh dalam satupermukaan gambar/imaji secara ekspresif dan imajinatif melalui proses estetis yang kreatifberdasarkan ciri personal penciptanya. Dengan demikian, hasil dari proses konstruksi tersebutsudah tidak tampak lagi imaji sebelumnya dan pemaknaannya sudah bergeser menjadi karyaimaji dengan pemaknaan baru.AbstractImage to Photography Visual Imagination. Visual image of photography is a visual recordingmedia which is objective and representative in revealing the truth when recording a reality. Thetechnology revolution led to the change in photography, from analog photographic technologyas one of the media for promoting truth or evidence and as media representing truth to thedigital technology which allow people to manipulate digital images through software. Digitaltechnology has made the truth in a photograph is no longer absolute. In the end, photographyas an images recording tool representing truth is doubted. It is getting harder and moredifficult to distinguish the original or fake photo, even an original photo can be said as aresult of manipulation.The creation of visual imagination photography is produced by thepower of human thought. The process requires a creativity of merging the previous or recentimages to imagine. The meanings will be shifted from visual image photography into a newvisual image photography. Visual imagination of the artistic process is created on the basisof artistic imagination, artistic imagination and artistic are based on a combination of realityand imagination.The creation of visual photography imagination is a power to construct orrecombine from multiple images or pictures imaginatively and creatively with the perceptionto be a whole new image, logical, and may occur with the use of techniques and photographiceffects. The process of constructing requires an ability of imagining to combine and unitethem into a single unit as a unity which is intact on s single surface of the picture/image,expressively and imaginatively through an aesthetic creative process based on the personalcharacteristics of the creator. By doing so, the construction process will no longer visible onthe former image and the meaning will shift into an image with a new meaning.

Virtualsite-Visualizing the Construction Process

Transactions ◽  
2005 ◽  
Vol 2 (1) ◽  
pp. 64-72 ◽  
Author(s):  
Robert Ellis ◽  
Ian Dickinson ◽  
Christopher Gorse
Keyword(s):  
Construction Process

scholarly journals Compressive Strength Gain Behavior and Prediction of Cement-Stabilized Macadam at Low Temperature Curing

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Yongli Xu ◽  
Guang Yang ◽  
Hongyuan Zhao
Keyword(s):  
Compressive Strength ◽  
Low Temperature ◽  
Curing Temperature ◽  
Strength Development ◽  
Construction Process ◽  
Strength Gain ◽  
Estimation Model ◽  
Maturity Method ◽  
Temperature Ranges ◽  
Natural Temperature

For cement-based materials, the curing temperature determines the strength gain rate and the value of compressive strength. In this paper, the 5% cement-stabilized macadam mixture is used. Three indoor controlled temperature curing and one outdoor natural curing scenarios are designed and implemented to study the strength development scenario law of compressive strength, and they are standard temperature curing (20°C), constant low temperature curing (10°C), day interaction temperature curing (varying from 6°C to 16°C), and one outdoor natural temperature curing (in which the air temperature ranges from 4°C to 20°C). Finally, based on the maturity method, the maturity-strength estimation model is obtained by using and analyzing the data collected from the indoor tests. The model is proved with high accuracy based on the validated results obtained from the data of outdoor tests. This research provides technical support for the construction of cement-stabilized macadam in regions with low temperature, which is beneficial in the construction process and quality control.

scholarly journals Carbon Emission Estimation of Assembled Composite Concrete Beams during Construction

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1810
Author(s):  
Kaitong Xu ◽  
Haibo Kang ◽  
Wei Wang ◽  
Ping Jiang ◽  
Na Li
Keyword(s):  
Life Cycle ◽  
Carbon Emissions ◽  
Emission Reduction ◽  
Carbon Emission ◽  
Composite Beams ◽  
Total Carbon ◽  
Construction Process ◽  
Low Carbon ◽  
Carbon Emission Reduction ◽  
The Government

At present, the issue of carbon emissions from buildings has become a hot topic, and carbon emission reduction is also becoming a political and economic contest for countries. As a result, the government and researchers have gradually begun to attach great importance to the industrialization of low-carbon and energy-saving buildings. The rise of prefabricated buildings has promoted a major transformation of the construction methods in the construction industry, which is conducive to reducing the consumption of resources and energy, and of great significance in promoting the low-carbon emission reduction of industrial buildings. This article mainly studies the calculation model for carbon emissions of the three-stage life cycle of component production, logistics transportation, and on-site installation in the whole construction process of composite beams for prefabricated buildings. The construction of CG-2 composite beams in Fujian province, China, was taken as the example. Based on the life cycle assessment method, carbon emissions from the actual construction process of composite beams were evaluated, and that generated by the composite beam components during the transportation stage by using diesel, gasoline, and electric energy consumption methods were compared in detail. The results show that (1) the carbon emissions generated by composite beams during the production stage were relatively high, accounting for 80.8% of the total carbon emissions, while during the transport stage and installation stage, they only accounted for 7.6% and 11.6%, respectively; and (2) during the transportation stage with three different energy-consuming trucks, the carbon emissions from diesel fuel trucks were higher, reaching 186.05 kg, followed by gasoline trucks, which generated about 115.68 kg; electric trucks produced the lowest, only 12.24 kg.

Sign in / Sign up

Export Citation Format

Share Document