scholarly journals Synergies between urban heat island and heat waves in Seoul: The role of wind speed and land use characteristics

PLoS ONE ◽  
2020 ◽  
Vol 15 (12) ◽  
pp. e0243571
Author(s):  
Jack Ngarambe ◽  
Jacques Nganyiyimana ◽  
Inhan Kim ◽  
Mat Santamouris ◽  
Geun Young Yun

The effects of heat waves (HW) are more pronounced in urban areas than in rural areas due to the additive effect of the urban heat island (UHI) phenomenon. However, the synergies between UHI and HW are still an open scientific question and have only been quantified for a few metropolitan cities. In the current study, we explore the synergies between UHI and HW in Seoul city. We consider summertime data from two non-consecutive years (i.e., 2012 and 2016) and ten automatic weather stations. Our results show that UHI is more intense during HW periods than non-heat wave (NHW) periods (i.e., normal summer background conditions), with a maximum UHI difference of 3.30°C and 4.50°C, between HW and NHW periods, in 2012 and 2016 respectively. Our results also show substantial variations in the synergies between UHI and HW due to land use characteristics and synoptic weather conditions; the synergies were relatively more intense in densely built areas and under low wind speed conditions. Our results contribute to our understanding of thermal risks posed by HW in urban areas and, subsequently, the health risks on urban populations. Moreover, they are of significant importance to emergency relief providers as a resource allocation guideline, for instance, regarding which areas and time of the day to prioritize during HW periods in Seoul.

2013 ◽  
Vol 52 (9) ◽  
pp. 2051-2064 ◽  
Author(s):  
Dan Li ◽  
Elie Bou-Zeid

AbstractCities are well known to be hotter than the rural areas that surround them; this phenomenon is called the urban heat island. Heat waves are excessively hot periods during which the air temperatures of both urban and rural areas increase significantly. However, whether urban and rural temperatures respond in the same way to heat waves remains a critical unanswered question. In this study, a combination of observational and modeling analyses indicates synergies between urban heat islands and heat waves. That is, not only do heat waves increase the ambient temperatures, but they also intensify the difference between urban and rural temperatures. As a result, the added heat stress in cities will be even higher than the sum of the background urban heat island effect and the heat wave effect. Results presented here also attribute this added impact of heat waves on urban areas to the lack of surface moisture in urban areas and the low wind speed associated with heat waves. Given that heat waves are projected to become more frequent and that urban populations are substantially increasing, these findings underline the serious heat-related health risks facing urban residents in the twenty-first century. Adaptation and mitigation strategies will require joint efforts to reinvent the city, allowing for more green spaces and lesser disruption of the natural water cycle.


2021 ◽  
Vol 9 ◽  
Author(s):  
Lian Zong ◽  
Shuhong Liu ◽  
Yuanjian Yang ◽  
Guoyu Ren ◽  
Miao Yu ◽  
...  

Large-scale modifications to urban underlying surfaces owing to rapid urbanization have led to stronger urban heat island (UHI) effects and more frequent urban heat wave (HW) events. Based on observations of automatic weather stations in Beijing during the summers of 2014–2020, we studied the interaction between HW events and the UHI effect. Results showed that the UHI intensity (UHII) was significantly aggravated (by 0.55°C) during HW periods compared to non-heat wave (NHW) periods. Considering the strong impact of unfavorable weather conditions and altered land use on the urban thermal environment, we evaluated the modulation of HW events and the UHI effect by wind speed and local climatic zones (LCZs). Wind speeds in urban areas were weakened due to the obstruction of dense high-rise buildings, which favored the occurrence of HW events. In detail, 35 HW events occurred over the LCZ1 of a dense high-rise building area under low wind speed conditions, which was much higher than that in other LCZ types and under high wind speed conditions (< 30 HW events). The latent heat flux in rural areas has increased more due to the presence of sufficient water availability and more vegetation, while the increase in heat flux in urban areas is mainly in the form of sensible heat flux, resulting in stronger UHI effect during HW periods. Compared to NHW periods, lower boundary layer and wind speed in the HW events weakened the convective mixing of air, further expanding the temperature gap between urban and rural areas. Note that LCZP type with its high-density vegetation and water bodies in the urban park area generally exhibited, was found to have a mitigating effect on the UHI, whilst at the same time increasing the frequency and duration of HW events during HW periods. Synergies between HWs and the UHI amplify both the spatial and temporal coverage of high-temperature events, which in turn exposes urban residents to additional heat stress and seriously threatens their health. The findings have important implications for HWs and UHII forecasts, as well as for scientific guidance on decision-making to improve the thermal environment and to adjust the energy structure.


2014 ◽  
Vol 2014 ◽  
pp. 1-19 ◽  
Author(s):  
Sahar Sodoudi ◽  
Parisa Shahmohamadi ◽  
Ken Vollack ◽  
Ulrich Cubasch ◽  
A. I. Che-Ani

Cities demonstrate higher nocturnal temperatures than surrounding rural areas, which is called “urban heat island” (UHI) effect. Climate change projections also indicate increase in the frequency and intensity of heat waves, which will intensify the UHI effect. As megacity Tehran is affected by severe heatwaves in summer, this study investigates its UHI characteristics and suggests some feasible mitigation strategies in order to reduce the air temperature and save energy. Temperature monitoring in Tehran shows clear evidence of the occurrence of the UHI effect, with a peak in July, where the urban area is circa 6 K warmer than the surrounding areas. The mobile measurements show a park cool island of 6-7 K in 2 central parks, which is also confirmed by satellite images. The effectiveness of three UHI mitigation strategies high albedo material (HAM), greenery on the surface and on the roofs (VEG), and a combination of them (HYBRID) has been studied using simulation with the microscale model ENVI-met. All three strategies show higher cooling effect in the daytime. The average nocturnal cooling effect of VEG and HYBRID (0.92, 1.10 K) is much higher than HAM (0.16 K), although high-density trees show a negative effect on nocturnal cooling.


2020 ◽  
Author(s):  
Paul Hamer ◽  
Heidelinde Trimmel ◽  
Philipp Weihs ◽  
Stéphanie Faroux ◽  
Herbert Formayer ◽  
...  

<p>Climate change threatens to exacerbate existing problems in urban areas arising from the urban heat island. Furthermore, expansion of urban areas and rising urban populations will increase the numbers of people exposed to hazards in these vulnerable areas. We therefore urgently need study of these environments and in-depth assessment of potential climate adaptation measures.</p><p>We present a study of heat wave impacts across the urban landscape of Vienna for different future development pathways and for both present and future climatic conditions. We have created two different urban development scenarios that estimate potential urban sprawl and optimized development concerning future building construction in Vienna and have built a digital representation of each within the Town Energy Balance (TEB) urban surface model. In addition, we select two heat waves of similar frequency of return representative for present and future conditions (following the RCP8.5 scenario) of the mid 21<sup>st</sup> century and use the Weather Research and Forecasting Model (WRF) to simulate both heat wave events. We then couple the two representations urban Vienna in TEB with the WRF heat wave simulations to estimate air temperature, surface temperatures and human thermal comfort during the heat waves. We then identify and apply a set of adaptation measures within TEB to try to identify potential solutions to the problems associated with the urban heat island.</p><p>Global and regional climate change under the RCP8.5 scenario causes the future heat wave to be more severe showing an increase of daily maximum air temperature in Vienna by 7 K; the daily minimum air temperature will increase by 2-4 K. We find that changes caused by urban growth or densification mainly affect air temperature and human thermal comfort local to where new urbanisation takes place and does not occur significantly in the existing central districts.</p><p>Exploring adaptation solutions, we find that a combination of near zero-energy standards and increasing albedo of building materials on the city scale accomplishes a maximum reduction of urban canyon temperature of 0.9 K for the minima and 0.2 K for the maxima. Local scale changes of different adaption measures show that insulation of buildings alone increases the maximum wall surface temperatures by more than 10 K or the maximum mean radiant temperature (MRT) in the canyon by 5 K.  Therefore, additional adaptation to reduce MRT within the urban canyons like tree shade are needed to complement the proposed measures.</p><p>This study concludes that the rising air temperatures expected by climate change puts an unprecedented heat burden on Viennese inhabitants, which cannot easily be reduced by measures concerning buildings within the city itself. Additionally, measures such as planting trees to provide shade, regional water sensitive planning and global reduction of greenhouse gas emissions in order to reduce temperature extremes are required.</p><p>We are now actively seeking to apply this set of tools to a wider set of cases in order to try to find effective solutions to projected warming resulting from climate change in urban areas.</p>


2021 ◽  
Author(s):  
William J. Keat ◽  
Elizabeth J. Kendon ◽  
Sylvia I. Bohnenstengel

AbstractIncreasing summer temperatures in a warming climate will increase the exposure of the UK population to heat-stress and associated heat-related mortality. Urban inhabitants are particularly at risk, as urban areas are often significantly warmer than rural areas as a result of the urban heat island phenomenon. The latest UK Climate Projections include an ensemble of convection-permitting model (CPM) simulations which provide credible climate information at the city-scale, the first of their kind for national climate scenarios. Using a newly developed urban signal extraction technique, we quantify the urban influence on present-day (1981–2000) and future (2061–2080) temperature extremes in the CPM compared to the coarser resolution regional climate model (RCM) simulations over UK cities. We find that the urban influence in these models is markedly different, with the magnitude of night-time urban heat islands overestimated in the RCM, significantly for the warmest nights (up to $$4~^{\circ }$$ 4 ∘ C), while the CPM agrees much better with observations. This improvement is driven by the improved land-surface representation and more sophisticated urban scheme MORUSES employed by the CPM, which distinguishes street canyons and roofs. In future, there is a strong amplification of the urban influence in the RCM, whilst there is little change in the CPM. We find that future changes in soil moisture play an important role in the magnitude of the urban influence, highlighting the importance of the accurate representation of land-surface and hydrological processes for urban heat island studies. The results indicate that the CPM provides more reliable urban temperature projections, due at least in part to the improved urban scheme.


Geografie ◽  
2019 ◽  
Vol 124 (1) ◽  
pp. 83-101 ◽  
Author(s):  
Ján Feranec ◽  
Monika Kopecká ◽  
Daniel Szatmári ◽  
Juraj Holec ◽  
Pavel Šťastný ◽  
...  

The urban heat island phenomenon occurs in urban areas. It is characterized by increased temperature of both the air and ground surface, compared to the surrounding rural landscape, and is a typical feature of the urban climate. As this phenomenon may affect quality of life in the cities, a variety of scientific studies have been carried out. The article provides a review and evaluation of selected published studies devoted to the issue of the urban heat island, from the point of view of the application of land cover and land use data in the 3-dimensional microscale urban model. Part of the review brings into focus the MUKLIMO model, which computes the atmospheric conditions in urban landscapes and predicts thermal and other climatic characteristics. Evaluated studies confirmed the correlation between the land cover/land use classes and occurrence of the urban heat islands, i.e. a higher percentage of impermeable surfaces within the urban heat island causes more intensive thermal manifestation. The urban heat island effect diminishes when there are less impermeable surfaces and a greater representation of urban greenery in land cover/land use classes.


2017 ◽  
Author(s):  
Hoa Q. Nguyen ◽  
Yuseob Kim ◽  
Yikweon Jang

Background. Cryptotympana atrata and Hyalessa fuscata are the most abundant cicada species in the Korean Peninsula, where their population densities are higher in urban areas than in rural ones. The urban heat island (UHI) effect, wherein human activities cause urban areas to be significantly warmer than surrounding rural areas, may underlie this difference. We predicted a positive relationship between the degrees of UHI in urban areas and population densities of C. atrata and H. fuscata. Methods. To test this prediction, we examined cicada population densities in three groups: those of high and low UHI areas within metropolitan Seoul, and suburban areas. Enumeration surveys of cicada exuviae were conducted from July to August, 2015. Results. C. atrata and H. fuscata constituted almost 30% and 70% of the cicada populations, respectively, collected across all sampling localities. No significant difference in species composition was observed, regardless of groups, but the densities of the two species were significantly higher in urban areas with high UHI than in other groups. Specifically, densities of C. atrata in high UHI areas were approximately seven and four times higher compared to those in low UHI and in suburban groups, respectively. The order of magnitude was greater in H. fuscata, where densities in high UHI group were respectively 22 and six times higher than those in low UHI and in suburban groups. Discussion. These results suggest that the UHI effect may be closely linked to high cicada densities in metropolitan Seoul, although the underlying mechanism for this remains unclear.


Author(s):  
Van Tran Thi ◽  
Bao Ha Duong Xuan ◽  
Mai Nguyen Thi Tuyet

In urban area, one of the great problem is the rise of temperature, which leads to form the urban heat island effect. This paper refers to the trend of the urban surface temperature extracted from the Landsat images from which to consider changes in the formation of surface urban heat island for the north of Ho Chi Minh city in period 1995-2015. Research has identified land surface temperature from thermal infrared band, according to the ability of the surface emission based on characteristics of normalized difference vegetation index NDVI. The results showed that temperature fluctuated over the city with a growing trend and the gradual expansion of the area of the high-temperature zone towards the suburbs. Within 20 years, the trend of the formation of surface urban heat island with two typical locations showed a clear difference between the surface temperature of urban areas and rural areas with space expansion of heat island in 4 times in 2015 compared to 1995. An extreme heat island located in the inner city has an area of approximately 18% compared to the total area of the region. Since then, the solution to reduce the impact of urban heat island has been proposed, in order to protect the urban environment and the lives of residents in Ho Chi Minh City becoming better


2017 ◽  
Vol 1 (1) ◽  
pp. 74-83
Author(s):  
Jarosław Gabała

In 2015 the State Higher Vocational School in Tarnów (PWSZ), under the Norwegian Project implemented in the Department of Environmental Protection, purchased and set in motion semi-professional automatic weather station DAVIS Vantage Pro2. The station measures basic meteorological elements e.g. air temperature, wind speed and direction or solar radiation. The logged data are intended for teaching at the School, including the specialization of environmental protection. Comparison of the data acquired at the PWSZ station and at the synoptic station of Institute of Meteorology and Water Management (IMGW) allowed the evaluation of the correlation of the measurement series of both stations. Furthermore it allowed for the initial analysis of the urban heat island (MWC) as one of the aspects of the local climate. There are confirmed typical thermal marks of the urban heat island during favourable weather conditions with radiation cooling at night. Especially during cloudless and windless radiation night, the air cools down more at the rural areas, and this favours the occurrence of the urban heat island phenomenon. The urban – rural thermal contrasts are then the greatest, up to 3 °C. In the daytime difference between the centre and the outskirts of the city is quite small (under 1 °C), so generally the urban heat island doesn’t occur during the day.


2018 ◽  
Author(s):  
Jan Karlický ◽  
Peter Huszár ◽  
Tomáš Halenka ◽  
Michal Belda ◽  
Michal Žák ◽  
...  

Abstract. Cities are characterized by different physical properties of surface compared to their rural counterparts, resulting in specific regime of the meteorological phenomenon. Our study aims to evaluate the impact of typical urban surfaces on the central-European urban climate in several model simulations, performed with the WRF and RegCM models. The specific processes occurring in the typical urban environment are described in the models by various types of urban parametrizations, greatly differing in complexity. Our results show that all models and urban parametrizations are able to reproduce the most typical urban effect, the summer evening and nocturnal Urban Heat Island, with the average magnitude of 2–3 °C. The impact of cities on the wind is clearly dependent on the urban parametrization employed, with more simple ones unable to fully capture the wind speed reduction induced by the city. In the summer, a significant difference in the boundary layer height (about 25 %) between models is detected. The urban induced changes of temperature and wind speed are propagated into higher altitudes up to 2 km, with a decreasing tendency of their magnitudes. With the exception of the summer daytime, the urban environment improves the weather conditions a little with regard to the pollutant dispersion, which could lead to the partly decreased concentration of the primary pollutants.


Sign in / Sign up

Export Citation Format

Share Document