scholarly journals Roof structure of shallow coal seam group mining in Western China

PLoS ONE ◽  
2021 ◽  
Vol 16 (8) ◽  
pp. e0255047
Author(s):  
Jian Cao ◽  
Qingxiang Huang
Keyword(s):  
Coal Seam ◽  
Western China ◽  
Beam Structure ◽  
Key Strata ◽  
Key Stratum ◽  
Roof Structure ◽  
Support Resistance ◽  
Shallow Coal Seam ◽  
Mining Height

In order to realize roof control of shallow coal seam group mining in Western China, combining with engineering statistics, physical simulation and theoretical analysis, the roof weighting characteristics during lower coal seam mining were revealed, and the classification of shallow coal seam group was proposed. Based on this, mechanical models of roof structure were set up, and the calculation method of support resistance was determined. The results show that the roof weighting is closely related to the interburden thickness and the mining height of lower coal seam, considering the ratio of interburden thickness to the mining height, as well as the key stratum structure, the classification of shallow coal seam group was put forward. The first type is shallow coal seam group with no key stratum (SCSG-No), its roof pressure is mainly affected by caving roof of upper coal seam, and the interburden roof forms slanting pillar-beam structure. The second type is shallow coal seam group with single key stratum (SCSG-S), interburden roof represents step voussoir beam structure. The third type is shallow coal seam group with double key strata (SCSG-D), interburden roof can form double key strata structure, the lower key stratum forms slanting step voussoir beam structure, while the upper key stratum forms voussoir beam structure, besides, longwall face represents large—small periodic weighting. Through establishing the roof structure models, the calculation formulas of support resistance were determined, it can provide basis for roof control and promote safe mining in Western China.

scholarly journals Key Stratum Structure and Support Working Resistance of Longwall Face with Large Mining Height in the Shallow Coal Seams, China

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Qingxiang Huang ◽  
Jinlong Zhou ◽  
Jian Cao
Keyword(s):  
Coal Seam ◽  
Physical Simulation ◽  
Longwall Face ◽  
Beam Structure ◽  
Key Stratum ◽  
Immediate Roof ◽  
Large Mining Height ◽  
Shallow Coal Seam ◽  
Working Resistance ◽  
Mining Height

The fully mechanized mining with large mining height is the main method for high yield and efficient coal mining in China. The key stratum structure (KSS) is the basis of revealing the mechanism of roof weighting and determination of support working resistance of the longwall face with large mining height (LFLMH) in the shallow coal seam. The height of the caving zone at LFLMH is large, the thick immediate roof forms the “short cantilever beam” structure commonly, and the hinge layer of the overlying key stratum will move upward to the higher position. The “high position oblique step voussoir beam” structure of single-key stratum (SKS) and “oblique step voussoir beam and voussoir beam” structure of double-key stratum (DKS) in the shallow coal seam were proposed with physical simulation and Universal Distinct Element Code (UDEC). The analysis of the KSS and numerical simulation reveals the mechanism of strong roof weighting at the SKS longwall face and large-small alternate periodic weighting at the DKS longwall. It is concluded that the large static load caused by the “equivalent immediate roof (EIR)” is the basic load, and the instability load of the KSS is the additional dynamic load of support. Besides, the calculation methods of the reasonable support working resistance at LFLMH were obtained and verified with engineering applications.

scholarly journals Analysis of Fracture Mechanics Theory of the First Fracture Mechanism of Main Roof and Support Resistance with Large Mining Height in a Shallow Coal Seam

2021 ◽  
Vol 13 (4) ◽  
pp. 1678
Author(s):  
Dengfeng Yang
Keyword(s):  
Stress Intensity ◽  
Fracture Mechanics ◽  
Coal Seam ◽  
Main Roof ◽  
In Situ Monitoring ◽  
Control Analysis ◽  
Large Mining Height ◽  
Support Resistance ◽  
Shallow Coal Seam ◽  
Mining Height

Because the first-weighting of a main roof with a large mining height has obvious sudden characteristics and is more severe, which causes large-scale support crushing and has a great impact on the ecological environment of the mining area, it is necessary to conduct an in-depth analysis. This paper studies the mechanical mechanism and asymmetric fracture conditions of a main roof with a large mining height, with the first-weighting occurring in a shallow coal seam. In combination with an asymmetric three-hinged arch structural model, the main roof was regarded as a finite plate model with a crack, and a fracture-mechanics model was established. The conditions and main controlling factors of main roof fracture asymmetry were analyzed, and the determination methods of the first-weighting interval and support resistance were further analyzed. The results show that the stress concentration and the stress-intensity factor increase at the crack tip with the advancement of the face; when the stress-intensity factors increase beyond the critical value, the crack expands until the first-weighting. The sufficient condition for modeling the instability was the length s of the branch crack reaching the protection thickness H of the main roof, and the necessary condition was the activation of the crack. The calculation equations of the first-weighting interval and the support resistance were obtained. The influence weights of each parameter on the support resistance are ordered as follows: overburden load q > rock fracture toughness KC > crack length a > main roof thickness h > weighting interval l. Finally, the theoretical analysis results were verified by an in situ monitoring case of the no. 33,206 working face in the Bulianta coal mine, China. On this basis, a reasonable value of the support resistance is further calculated. The results mentioned above can provide a new method for researching the first-weighting of the main roof and can improve the accuracy of the roof control analysis. The research on the mechanisms of first-weighting and the support resistance can effectively promote the safety production of mine, which is in line with the concept of green and sustainable development of the mine.

scholarly journals Research on the Roof Advanced Breaking Position and Influences of Large Mining Height Working Face in Shallow Coal Seam

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1685
Author(s):  
Qingxiang Huang ◽  
Yanpeng He ◽  
Feng Li
Keyword(s):  
Coal Seam ◽  
Field Measurement ◽  
Physical Simulation ◽  
Main Roof ◽  
Key Strata ◽  
Working Face ◽  
Measurement Results ◽  
Large Mining Height ◽  
Shallow Coal Seam ◽  
Mining Height

The large mining height (LMH) in shallow coal seam has been widely applied in the Shenfu coalfield, China. The dynamic load is obvious, and the rib spalling is serious when the LMH working face concerns roof weighting. The advanced breaking position of the roof affects the strength of the ground pressure when the roof is broken. Firstly, based on a large number of actual measurements and physical simulation experiments, the rock formation in the fall zone, where the articulated structure cannot be articulated between the coal seam and the main roof, is called the equivalent immediate roof (EIR). When the mining height increases, the thickness of the EIR increases non-linearly. Next, based on the theory of “elastic foundation beam”, a mechanical model for the advanced breaking of the roof is established in shallow coal seam, and the calculation equation for the advanced breaking position of the roof is given; then, designed and carry out boreholes of the no. 22201 working face in the Zhangjiamao Coal Mine. The theoretical calculation of key strata results (5.6–6.9 m) are in the range of field measurement results (5–8 m). According to the field measurement results, the roof movement of the LMH working face is ahead of the roof weighting. Finally, we define the thickness of EIR and the mining height ratio as the immediate mining ratio ki, which affects the degree of filling of the goaf and determines the structural form of the main roof. When the ki is small, the goaf is fully filled; when the ki is large, the goaf is fully filled. Under the same conditions, different filling rate conditions will form different roof structures. Results of this research can be helpful to control roof weighting and provide early warning of possible safety problems related to the LMH working face in shallow coal seam.

scholarly journals Movement Law and Discriminant Method of Key Strata Breakage Based on Microseismic Monitoring

2019 ◽  
Vol 2019 ◽  
pp. 1-19 ◽  
Author(s):  
Yang Li ◽  
Tianhong Yang ◽  
Weidong Song ◽  
Ling Yu
Keyword(s):  
High Intensity ◽  
Microseismic Monitoring ◽  
Geological Structure ◽  
Western China ◽  
Dynamic Monitoring ◽  
Ecological Environment ◽  
Environmental Damage ◽  
Key Strata ◽  
Key Stratum ◽  
Working Face

Because of the unique natural geography, geological structure, and ecological environment, there are serious geological disasters and environmental damage caused by the high-intensity mining in Western China. It seriously restricts the development of coal resources and the protection of ecological environment. In order to fully capture the law of key stratum breakage with high-intensity mining, the IMS microseismic system was introduced into Xiaojihan coal mine which is a typical high-intensity mining mine in Western China, and the whole process dynamic monitoring was carried out. The process of key stratum breakage was analysed by MS data, which were in agreement with the pressure analysis results of the hydraulic support of the working face. The results showed that there were the obvious forewarning characteristics in microseismic event number, energy release, energy index, Schmidt number, coefficient of seismic response, and b value when the key stratum was breaking. Then, a method to discriminate the breakage of key stratum was proposed by using the forewarning characteristics, which could provide the guidance for prevention and control of geological hazards in the working face with high-intensity mining.

scholarly journals The Key Stratum Structure Morphology of Longwall Mechanized Top Coal Caving Mining in Extra-Thick Coal Seams: A Typical Case Study

2020 ◽  
Vol 2020 ◽  
pp. 1-13 ◽  
Author(s):  
Fulian He ◽  
Xiaobin Li ◽  
Wenrui He ◽  
Yongqiang Zhao ◽  
Zhuhe Xu ◽  
...  
Keyword(s):  
Coal Seam ◽  
Cantilever Beam ◽  
Coal Seams ◽  
Key Strata ◽  
Key Stratum ◽  
Structure Morphology ◽  
Coal Wall ◽  
Coal Seam Thickness ◽  
Longitudinal Cracks ◽  
Overlying Strata

Longwall mechanized top coal caving mining (LMTCCM) in extra-thick coal seams has its own characteristics. The law of mining pressure and overlying strata failure height in extra-thick coal seams are much larger than those of medium-thick and thick coal seams. The key stratum structure morphology also has an important influence on the law of overlying strata movement and stability of surrounding rock. Based on the engineering geological conditions, this paper used the method of theoretical analysis and numerical simulation to study the key stratum structure morphology of LMTCCM in extra-thick coal seams. The results show that under the condition of LMTCCM in extra-thick coal seams, the key stratum forms the structure of low cantilever beam and high hinged rock beam. With the increase of coal seam thickness, the breaking position of cantilever beam is closer to the coal wall. Through theoretical calculation, it is obtained that the breaking length of cantilever beam is 31.5 m and the breaking position of cantilever beam is 15.4 m away from coal wall. With the increase of cycle, key strata will undergo the evolution law from the generation of longitudinal cracks to the hinged structure and then to the cantilever beam structure. The breakage of key strata will cause the expansion of longitudinal cracks and the overall synchronous movement of overlying strata. With the increase of coal seam thickness, the distribution of longitudinal cracks will gradually transfer from the upper part of goaf to the deep part of coal body in space and increase in quantity. This research is of great significance for improving the stability of overlying strata and ensuring the safe and efficient mining of extra-thick coal seams.

scholarly journals Research on Surface Failure Law of Working Faces in Large Mining Height and Shallow Buried Coal Seam

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Zhenhua Li ◽  
Yingkun Pang ◽  
Yongsheng Bao ◽  
Zhanyuan Ma
Keyword(s):  
Near Field ◽  
Mining Area ◽  
Surface Cracks ◽  
Large Space ◽  
Key Strata ◽  
Key Stratum ◽  
Surface Failure ◽  
Working Face ◽  
Large Mining Height ◽  
Mining Height

In the process of high-intensity and large-space mining in Shendong mining area, various surface cracks are generated on the surface, resulting in serious damage to the surface buildings and the local ecological environment. To study the influence of overlying rock movement on surface failure of near-field single key strata of near-shallow buried and large mining height working face, the relationship between overburden movement, strata pressure appearance, and surface failure at working face 52307 in Daliuta mining area was analyzed by field measurement and numerical simulation. The results show the following: (1) there is only one thick and hard key stratum in the overburden of large mining height and near-shallow buried working face. Under the condition of presplitting roof blasting, the first weighting step is still as high as 95 m, and the periodic breaking step of roof is 20–30 m. During the weighting, the working resistance of support is still close to the rated resistance. (2) The single key stratum plays an obvious role in controlling overburden movement. After the first weighting of the working face, a stepped subsidence crack appears on the surface within a short time, and the crack lags behind the working face for about 5 m. (3) During each periodic weighting process, the breaking and subsidence of key blocks are accompanied by surface cracks.

A Study on the Roof Fracture Mechanism of Large Cutting Height Workface in Shallow Thick Coal Seam

2011 ◽  
Vol 347-353 ◽  
pp. 183-188 ◽  
Author(s):  
Ping Wei Xing ◽  
Xuan Min Song ◽  
Yu Ping Fu
Keyword(s):  
Coal Seam ◽  
Mechanical Model ◽  
Calculation Formula ◽  
Thick Coal Seam ◽  
Key Stratum ◽  
Horizontal Pressure ◽  
Working Resistance ◽  
Cutting Height ◽  
Theoretical Results ◽  
Mining Height

Based on the high mining height of large cutting height workface in shallow thick coal seam and the few falling waste rock in goaf, the key roof can not be supported effectively, the facture mechanical model of key roof was established. The theoretical calculation formula of key stratum fracture step and working resistance of support were obtained by using fracture mechanics. The results show that the fracture step of key roof relate to not only the mechanical character of key roof and the load of overlaying rock seam, but also the working resistance of support and horizontal pressure in key roof. The reasonable working resistance of support and the step of roof fracture were analyzed in 1-2coalmine 51104 face of a mine in Dongsheng area. The theoretical results are well agreeable with the field measured results.

scholarly journals The Study of Key Stratum Location and Characteristics on the Mining of Extremely Thick Coal Seam under Goaf

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Gaochuan Guo ◽  
Yongkang Yang
Keyword(s):  
Coal Seam ◽  
Longwall Mining ◽  
Maximum Principal Stress ◽  
Engineering Practice ◽  
Coal Seams ◽  
Thick Coal Seam ◽  
Key Strata ◽  
Key Stratum ◽  
Arch Structure ◽  
Overlying Strata

The basis of traditional ground pressure and strata control techniques is the key strata theory, wherein the position of the key stratum can easily be determined for coal seams with regular thickness and without goaf. However, in the case of mining ultrathick coal seams underneath goaf, the traditional methods used for the calculation of key stratum position need to be improved in order to account for the additional coal seam thickness and the presence of an upper goaf. This study analyzed the failure height and collapse characteristics of overlying strata during excavation for determining the structure of the failed overlying strata. The results indicate that the intercalation and overlying strata gradually evolve into a large “arch structure” and a small “arch structure” during longwall mining, respectively. A mechanical model of the bearing characteristics of the interlayer key strata structure was established according to the structure of the intercalation rock layer, which is a hinged block structure. The results of the model indicate that the maximum principal stress occurs when the key strata portion of the arch structure bears the overlying load. Consequently, the movement and position of the interlayer key strata can be evaluated throughout the mining process of the ultrathick coal seams underneath goaf. This method was used to determine the position of interlayer key stratum of overlying strata in Xiegou coal mine. And the results agree with that of the engineering practice. The results are significant to determine the key strata position during ultrathick coal seam underneath goaf longwall mining.

Research on the Height of Caving Zone and Roof Classification of Mining Whole Height at One Times in Thick Coal Seam

2011 ◽  
Vol 99-100 ◽  
pp. 207-212 ◽  
Author(s):  
Zhi Qiang Wang ◽  
Han Yang ◽  
Yun Bo Chang ◽  
Peng Wang
Keyword(s):  
Theoretical Analysis ◽  
Coal Seam ◽  
Main Roof ◽  
Thick Coal Seam ◽  
Key Strata ◽  
Immediate Roof ◽  
Similar Simulation Experiment ◽  
Scientific Judgment ◽  
Basic Roof

Research on the division of the overlying rock roof of stope has great significance. The existing classification method is based on the determination of existing mining height and loose coefficient , and such studies have been proved exist some limitations in the applications of thick coal seam full coal mining. Theoretical analysis and similarity simulation experiments show that during the mining all height at one times in thick coal seam, as the recovery room increase ,the thickness of immediate roof of the overlying strata which fall with the mining increased signifi-cantly, and the structure of the overlying critical layer to stabilize that is the layer of hypogyny basic roof gradually increased. Through theoretical analysis and summarizing similar simulation experiment phenomenon, based on the definition and characteristics of the immediate roof and main roof, with elastic thin mechanics and the key strata theory as the research foundation, doing scientific classification of mining face's roof in all height at one times in thick coal seam, and combined impact of all factors, which influence the breakage and caving of Basic Roof, to estab-lish a scientific judgment in the length of work face and the pressure of basic roof for practical production relations, provide certain theoretical basis.

Sign in / Sign up

Export Citation Format

Share Document