scholarly journals Analysis of Fracture Mechanics Theory of the First Fracture Mechanism of Main Roof and Support Resistance with Large Mining Height in a Shallow Coal Seam

2021 ◽  
Vol 13 (4) ◽  
pp. 1678
Author(s):  
Dengfeng Yang
Keyword(s):  
Stress Intensity ◽  
Fracture Mechanics ◽  
Coal Seam ◽  
Main Roof ◽  
In Situ Monitoring ◽  
Control Analysis ◽  
Large Mining Height ◽  
Support Resistance ◽  
Shallow Coal Seam ◽  
Mining Height

Because the first-weighting of a main roof with a large mining height has obvious sudden characteristics and is more severe, which causes large-scale support crushing and has a great impact on the ecological environment of the mining area, it is necessary to conduct an in-depth analysis. This paper studies the mechanical mechanism and asymmetric fracture conditions of a main roof with a large mining height, with the first-weighting occurring in a shallow coal seam. In combination with an asymmetric three-hinged arch structural model, the main roof was regarded as a finite plate model with a crack, and a fracture-mechanics model was established. The conditions and main controlling factors of main roof fracture asymmetry were analyzed, and the determination methods of the first-weighting interval and support resistance were further analyzed. The results show that the stress concentration and the stress-intensity factor increase at the crack tip with the advancement of the face; when the stress-intensity factors increase beyond the critical value, the crack expands until the first-weighting. The sufficient condition for modeling the instability was the length s of the branch crack reaching the protection thickness H of the main roof, and the necessary condition was the activation of the crack. The calculation equations of the first-weighting interval and the support resistance were obtained. The influence weights of each parameter on the support resistance are ordered as follows: overburden load q > rock fracture toughness KC > crack length a > main roof thickness h > weighting interval l. Finally, the theoretical analysis results were verified by an in situ monitoring case of the no. 33,206 working face in the Bulianta coal mine, China. On this basis, a reasonable value of the support resistance is further calculated. The results mentioned above can provide a new method for researching the first-weighting of the main roof and can improve the accuracy of the roof control analysis. The research on the mechanisms of first-weighting and the support resistance can effectively promote the safety production of mine, which is in line with the concept of green and sustainable development of the mine.

scholarly journals Research on the Roof Advanced Breaking Position and Influences of Large Mining Height Working Face in Shallow Coal Seam

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1685
Author(s):  
Qingxiang Huang ◽  
Yanpeng He ◽  
Feng Li
Keyword(s):  
Coal Seam ◽  
Field Measurement ◽  
Physical Simulation ◽  
Main Roof ◽  
Key Strata ◽  
Working Face ◽  
Measurement Results ◽  
Large Mining Height ◽  
Shallow Coal Seam ◽  
Mining Height

The large mining height (LMH) in shallow coal seam has been widely applied in the Shenfu coalfield, China. The dynamic load is obvious, and the rib spalling is serious when the LMH working face concerns roof weighting. The advanced breaking position of the roof affects the strength of the ground pressure when the roof is broken. Firstly, based on a large number of actual measurements and physical simulation experiments, the rock formation in the fall zone, where the articulated structure cannot be articulated between the coal seam and the main roof, is called the equivalent immediate roof (EIR). When the mining height increases, the thickness of the EIR increases non-linearly. Next, based on the theory of “elastic foundation beam”, a mechanical model for the advanced breaking of the roof is established in shallow coal seam, and the calculation equation for the advanced breaking position of the roof is given; then, designed and carry out boreholes of the no. 22201 working face in the Zhangjiamao Coal Mine. The theoretical calculation of key strata results (5.6–6.9 m) are in the range of field measurement results (5–8 m). According to the field measurement results, the roof movement of the LMH working face is ahead of the roof weighting. Finally, we define the thickness of EIR and the mining height ratio as the immediate mining ratio ki, which affects the degree of filling of the goaf and determines the structural form of the main roof. When the ki is small, the goaf is fully filled; when the ki is large, the goaf is fully filled. Under the same conditions, different filling rate conditions will form different roof structures. Results of this research can be helpful to control roof weighting and provide early warning of possible safety problems related to the LMH working face in shallow coal seam.

scholarly journals Key Stratum Structure and Support Working Resistance of Longwall Face with Large Mining Height in the Shallow Coal Seams, China

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Qingxiang Huang ◽  
Jinlong Zhou ◽  
Jian Cao
Keyword(s):  
Coal Seam ◽  
Physical Simulation ◽  
Longwall Face ◽  
Beam Structure ◽  
Key Stratum ◽  
Immediate Roof ◽  
Large Mining Height ◽  
Shallow Coal Seam ◽  
Working Resistance ◽  
Mining Height

The fully mechanized mining with large mining height is the main method for high yield and efficient coal mining in China. The key stratum structure (KSS) is the basis of revealing the mechanism of roof weighting and determination of support working resistance of the longwall face with large mining height (LFLMH) in the shallow coal seam. The height of the caving zone at LFLMH is large, the thick immediate roof forms the “short cantilever beam” structure commonly, and the hinge layer of the overlying key stratum will move upward to the higher position. The “high position oblique step voussoir beam” structure of single-key stratum (SKS) and “oblique step voussoir beam and voussoir beam” structure of double-key stratum (DKS) in the shallow coal seam were proposed with physical simulation and Universal Distinct Element Code (UDEC). The analysis of the KSS and numerical simulation reveals the mechanism of strong roof weighting at the SKS longwall face and large-small alternate periodic weighting at the DKS longwall. It is concluded that the large static load caused by the “equivalent immediate roof (EIR)” is the basic load, and the instability load of the KSS is the additional dynamic load of support. Besides, the calculation methods of the reasonable support working resistance at LFLMH were obtained and verified with engineering applications.

scholarly journals Roof structure of shallow coal seam group mining in Western China

PLoS ONE ◽  
2021 ◽  
Vol 16 (8) ◽  
pp. e0255047
Author(s):  
Jian Cao ◽  
Qingxiang Huang
Keyword(s):  
Coal Seam ◽  
Western China ◽  
Beam Structure ◽  
Key Strata ◽  
Key Stratum ◽  
Roof Structure ◽  
Support Resistance ◽  
Shallow Coal Seam ◽  
Mining Height

In order to realize roof control of shallow coal seam group mining in Western China, combining with engineering statistics, physical simulation and theoretical analysis, the roof weighting characteristics during lower coal seam mining were revealed, and the classification of shallow coal seam group was proposed. Based on this, mechanical models of roof structure were set up, and the calculation method of support resistance was determined. The results show that the roof weighting is closely related to the interburden thickness and the mining height of lower coal seam, considering the ratio of interburden thickness to the mining height, as well as the key stratum structure, the classification of shallow coal seam group was put forward. The first type is shallow coal seam group with no key stratum (SCSG-No), its roof pressure is mainly affected by caving roof of upper coal seam, and the interburden roof forms slanting pillar-beam structure. The second type is shallow coal seam group with single key stratum (SCSG-S), interburden roof represents step voussoir beam structure. The third type is shallow coal seam group with double key strata (SCSG-D), interburden roof can form double key strata structure, the lower key stratum forms slanting step voussoir beam structure, while the upper key stratum forms voussoir beam structure, besides, longwall face represents large—small periodic weighting. Through establishing the roof structure models, the calculation formulas of support resistance were determined, it can provide basis for roof control and promote safe mining in Western China.

Research on Rational Width of Entry Protection Coal-Pillar in Large Mining Height Work-Face of Shallow Coal Seam

2014 ◽  
Vol 1010-1012 ◽  
pp. 1461-1466
Author(s):  
Xin Bin Xu ◽  
Bang Jun Wang ◽  
Ting Feng Cui
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Theoretical Calculation ◽  
Coal Pillar ◽  
Engineering Practice ◽  
Large Mining Height ◽  
Shallow Coal Seam ◽  
Mining Face ◽  
Mining Height

For the study on the problem of rational width of entry protection coal-pillar, according to the gateway of 5103 mining face in Heshan Mine, through theoretical calculation and numerical simulation, rational width of entry protection coal-pillar was educed, which was 25 m. The roof and floor and 2-sides deformation were both 35 mm through engineering practice, and its feasibility was demonstrated, which provided some theoretical references for preserving reasonable coal-pillar for the similar coalface with large mining height.

scholarly journals Mechanical Modeling of Roof Fracture Instability Mechanism and Its Control in Top-Coal Caving Mining under Thin Topsoil of Shallow Coal Seam

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Peilin Gong ◽  
Tong Zhao ◽  
Kaan Yetilmezsoy ◽  
Kang Yi
Keyword(s):  
Coal Seam ◽  
Mechanical Model ◽  
Main Roof ◽  
Stability Control ◽  
Hydraulic Support ◽  
Rock Stability ◽  
Shallow Coal Seam ◽  
Minimum Height ◽  
The Stability ◽  
Working Resistance

This study aimed to explore the safe and efficient top-coal caving mining under thin topsoil of shallow coal seam (SCS) and realize the optimization of hydraulic support. Numerical simulation and theoretical analysis were used to reveal the stress distribution of the topsoil, the structure characteristics of the main roof blocks, and the development of the roof subsidence convergence. Step subsidence of the initial fractured main roof after sliding destabilization frequently existed, which seriously threatened the safety of the hydraulic supports. Hence, a mechanical model of the main roof blocks, where the topsoil thickness was less than the minimum height of the unloading arch, was established, and the mechanical criterion of the stability was achieved. The working resistance of the hydraulic support was calculated, and the reasonable type was optimized so as to avoid crushing accident. Findings of the present analysis indicated that the hydraulic support optimization was mainly affected by fractured main roof blocks during the first weighting. According to the block stability mechanical model based on Mohr–Coulomb criterion, the required working resistance and the supporting intensity were determined as 4899 kN and 0.58 MPa, respectively. The ZZF5200/19/32S low-position top-coal caving hydraulic support was selected for the studied mine and support-surrounding rock stability control of thin-topsoil SCS could be achieved without crushing accident.

Sign in / Sign up

Export Citation Format

Share Document