scholarly journals Lifecycle assessment of a stapling machine

2014 ◽  
Vol 4 (1) ◽  
pp. 12 ◽  
Author(s):  
Israel Dunmade
Keyword(s):  
Climate Change ◽  
End Of Life ◽  
Environmental Impacts ◽  
Material Selection ◽  
Product Distribution ◽  
Mechanical Device ◽  
Lifecycle Assessment ◽  
Life Management ◽  
Resource Recycling ◽  
Eutrophication Potential

A stapler is a mechanical device used to join two or more sheets of paper together by driving a thin metal staple through the sheets. They are widely used in schools, offices, business, government and homes. The anticipated large quantity of waste that is disposed of annually present great risk of environmental pollution and opportunities for economically viable resource recycling. This study evaluates potential environmental impacts of a Stapling machine and its end-of-life management opportunities. Environmental lifecycle assessment (LCA) process was used for the evaluation. The assessment was implemented with the aid of SimaPro software version 7.3.3.Results of the analyses revealed that climate change and eutrophication are the significant potential environmental impacts. Each Stapler has 1.265130 kg CO2-eq in Global Warming Potential and 0.113067 max kg O2-eq as its Eutrophication Potential. Further examination also showed that most of the impacts are from material selection, product distribution, and end-of-life management of the stapling machine. This study provides insights on potential environmental impacts of stapling machines and potential opportunities for improvements in their end-of-life management.

scholarly journals End-of-Life Alternatives of Glass Reinforced Polyester Boat Hulls Compared by LCA

2018 ◽  
Vol 27 (4) ◽  
pp. 096369351802700 ◽  
Author(s):  
Mehmet Önal ◽  
Gökdeniz Neşer
Keyword(s):  
End Of Life ◽  
Environmental Impacts ◽  
Raw Materials ◽  
Weight Ratio ◽  
Cost Effective ◽  
Raw Material ◽  
Photochemical Oxidation ◽  
Human Toxicity ◽  
Vacuum Infusion ◽  
Infusion Method

Glass reinforced polyester (GRP), as a thermoset polymer composites, dominates boat building industry with its several advantages such as high strength/weight ratio, cohesiveness, good resistance to environment. However, proper recovering and recycling of GRP boats is became a current environmental requirement that should be met by the related industry. In this study, to propose in a cost effective and environmentally friendly way, Life Cycle Assessment (LCA) has been carried out for six scenarios include two moulding methods (namely Hand Lay-up Method, HLM and Vacuum Infusion Method, VIM) and three End-of-Life (EoL) alternatives(namely Extruding, Incineration and Landfill) for a recreational boat's GRP hulls. A case study from raw materials purchasing phase to disposal/recycling stages has been established taking 11 m length GRP boat hull as the functional unit. Analysis show that in the production phase, the impacts are mainly due to the use of energy (electricity), transport and raw material manufacture. Largest differences between the methods considered (HLM and VIM) can be observed in the factors of marine aquatic ecotoxicity and eutrophication while the closest ones are abiotic depletion, ozon layer depletion and photochemical oxidation. The environmental impact of VIM is much higher than HLM due to its higher energy consumption while vacuum infusion method has lower risk than hand lay-up method in terms of occupational health by using less raw material (resin) in a closed mold. In the comparison of the three EoL techniques, the mechanical way of recycling (granule extruding) shows better environmental impacts except terrestrial ecotoxicity, photochemical oxidation and acidification. Among the EoL alternatives, landfill has the highest environmental impacts except ‘global warming potential’ and ‘human toxicity’ which are the highest in extrusion. The main cause of the impacts of landfill is the transportation needs between the EoL boats and the licenced landfill site. Although it has the higher impact on human toxicity, incineration is the second cleaner alternative of EoL techniques considered in this study. In fact that the similar trend has been observed both in production and EoL phases of the boat. It is obvious that using much more renewable energy mix and greener transportation alternative can reduce the overall impact of the all phases considerably.

scholarly journals Metrics for Measuring Sustainable Product Design Concepts

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3469
Author(s):  
Ji Han ◽  
Pingfei Jiang ◽  
Peter R. N. Childs
Keyword(s):  
Product Design ◽  
End Of Life ◽  
Environmental Impacts ◽  
Conceptual Design ◽  
Design Stage ◽  
Sustainable Product Design ◽  
Early Design ◽  
Design Concepts ◽  
Concept Evaluation ◽  
Sustainable Product

Although products can contribute to ecosystems positively, they can cause negative environmental impacts throughout their life cycles, from obtaining raw material, production, and use, to end of life. It is reported that most negative environmental impacts are decided at early design phases, which suggests that the determination of product sustainability should be considered as early as possible, such as during the conceptual design stage, when it is still possible to modify the design concept. However, most of the existing concept evaluation methods or tools are focused on assessing the feasibility or creativity of the concepts generated, lacking the measurements of sustainability of concepts. The paper explores key factors related to sustainable design with regard to environmental impacts, and describes a set of objective measures of sustainable product design concept evaluation, namely, material, production, use, and end of life. The rationales of the four metrics are discussed, with corresponding measurements. A case study is conducted to demonstrate the use and effectiveness of the metrics for evaluating product design concepts. The paper is the first study to explore the measurement of product design sustainability focusing on the conceptual design stage. It can be used as a guideline to measure the level of sustainability of product design concepts to support designers in developing sustainable products. Most significantly, it urges the considerations of sustainability design aspects at early design phases, and also provides a new research direction in concept evaluation regarding sustainability.

The Benefit of Focusing on Air Pollution Instead of Climate Change: How Discussing Power Plant Emissions in the Context of Air Pollution, Rather than Climate Change, Influences Perceived Benefits, Costs, and Political Action for Policies to Limit Emissions

2020 ◽  
pp. 107554702098044
Author(s):  
P. Sol Hart ◽  
Lauren Feldman
Keyword(s):  
Climate Change ◽  
Air Pollution ◽  
Power Plant ◽  
Environmental Impacts ◽  
Political Ideology ◽  
Political Action ◽  
Perceived Benefits ◽  
Power Plant Emissions ◽  
Plant Emissions ◽  
Benefits And Costs

This experiment examines how framing power plant emissions in terms of air pollution or climate change, and in terms of health or environmental impacts, influences perceived benefits and costs of policies to reduce emissions and intentions to take political action that supports such policies. A moderated-mediation model reveals that focusing on air pollution, instead of climate change, has a positive significant indirect influence on intended political action through the serial mediators of perceived benefits and costs. Political ideology moderates the association between perceived benefits and political action. No framing effects are observed in the comparison between health and environmental impacts.

scholarly journals Sustainable End-of-Life Management of Wind Turbine Blades: Overview of Current and Coming Solutions

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1124
Author(s):  
Leon Mishnaevsky Mishnaevsky
Keyword(s):  
Wind Turbine ◽  
End Of Life ◽  
Wind Turbines ◽  
Natural Fiber ◽  
Turbine Blades ◽  
Wind Turbine Blades ◽  
Maintenance And Repair ◽  
Life Management ◽  
Large Wind

Various scenarios of end-of-life management of wind turbine blades are reviewed. “Reactive” strategies, designed to deal with already available, ageing turbines, installed in the 2000s, are discussed, among them, maintenance and repair, reuse, refurbishment and recycling. The main results and challenges of “pro-active strategies”, designed to ensure recyclability of new generations of wind turbines, are discussed. Among the main directions, the wind turbine blades with thermoplastic and recyclable thermoset composite matrices, as well as wood, bamboo and natural fiber-based composites were reviewed. It is argued that repair and reuse of wind turbine blades, and extension of the blade life has currently a number of advantages over other approaches. While new recyclable materials have been tested in laboratories, or in some cases on small or medium blades, there are remaining technological challenges for their utilization in large wind turbine blades.

Sign in / Sign up

Export Citation Format

Share Document