scholarly journals Comparison of Popular Three-Dimensional Printing Materials for Oral and Maxillofacial Surgical Guidance Model Oral and Maxillofacial Surgical Guidance Model

2020 ◽  
Vol 27 (3) ◽  
Author(s):  
Mohammad Adhitya ◽  
◽  
Sunarso Sunarso ◽  
Abdul Muis ◽  
◽  
...  
Keyword(s):  
Three Dimensional ◽  
3D Models ◽  
Digital Data ◽  
Test Results ◽  
Surgical Guidance ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
Data Source ◽  
Dimensional Printing ◽  
Guidance Model

The application of three-dimensional (3D) models in the medical field has become popular. However, the accuracy of 3D models for surgical guidance varies among different materials and 3D printing technologies, such as printing machine usage. Objectives: This study aims to obtain more information about the effect of three different materials printed using a fused deposition material printer from the same digital data source. This study also aims to compare, analyze, and test the materials’ ability. Methods: Each of the filament materials (acetylbutane stearate [ABS], polylactic acid [PLA], and high-impact polystyrene [HIPS]) are printed at two infill densities, their weight, volume, and dimension are measured, and infill materials are prepared. Printing time is estimated and calculated on the basis of printing properties by using Simplify3D© software. The strength and surface tension of each sample are examined via a drilling test. Results: PLA is better than ABS and HIPS for printing our 3D model because of its properties. Conclusion: Ideal 3D materials for printing 3D models should fulfill the criteria on accuracy, strength, weight, and durability for usage. However, production time and cost should also be considered.

scholarly journals Rapid Prototyping: Technologies, Materials and Advances

2016 ◽  
Vol 61 (2) ◽  
pp. 891-896 ◽  
Author(s):  
P. Dudek ◽  
A. Rapacz-Kmita
Keyword(s):  
Rapid Prototyping ◽  
Selective Laser Sintering ◽  
Three Dimensional ◽  
Digital Data ◽  
Fused Deposition Modelling ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
Composite Fabrication ◽  
Materials Used ◽  
Dimensional Printing

AbstractIn the context of product development, the term rapid prototyping (RP) is widely used to describe technologies which create physical prototypes directly from digital data. Recently, this technology has become one of the fastest-growing methods of manufacturing parts. The paper provides brief notes on the creation of composites using RP methods, such as stereolithography, selective laser sintering or melting, laminated object modelling, fused deposition modelling or three-dimensional printing. The emphasis of this work is on the methodology of composite fabrication and the variety of materials used in these technologies.

scholarly journals Influence of the Infill Geometry of 3D-Printed Tablets on Drug Dissolution

2021 ◽  
Vol 5 (1) ◽  
pp. 15
Author(s):  
Nuno Venâncio ◽  
Gabriela G. Pereira ◽  
João F. Pinto ◽  
Ana I. Fernandes
Keyword(s):  
Three Dimensional ◽  
Drug Dissolution ◽  
Fused Deposition Modelling ◽  
Three Dimensional Printing ◽  
Preliminary Results ◽  
Fused Deposition ◽  
3D Printed ◽  
Dimensional Printing ◽  
Hot Melt ◽  
Patient Centric

Patient-centric therapy is especially important in pediatrics and may be attained by three-dimensional printing. Filaments containing 30% w/w of theophylline were produced by hot-melt extrusion and printed using fused deposition modelling to produce tablets. Here, preliminary results evaluating the effect of infill geometry (cross, star, grid) on drug content and release are reported.

scholarly journals 3D-Printed Soft Structure of Polyurethane and Magnetorheological Fluid: A Proof-of-Concept Investigation of its Stiffness Tunability

Micromachines ◽  
2019 ◽  
Vol 10 (10) ◽  
pp. 655 ◽  
Author(s):  
Seong-Woo Hong ◽  
Ji-Young Yoon ◽  
Seong-Hwan Kim ◽  
Sun-Kon Lee ◽  
Yong-Rae Kim ◽  
...  
Keyword(s):  
Fused Deposition Modeling ◽  
Permanent Magnets ◽  
Thermoplastic Polyurethane ◽  
Three Dimensional ◽  
Magnetorheological Fluid ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
3D Printed ◽  
Dimensional Printing

In this study, a soft structure with its stiffness tunable by an external field is proposed. The proposed soft beam structure consists of a skin structure with channels filled with a magnetorheological fluid (MRF). Two specimens of the soft structure are fabricated by three-dimensional printing and fused deposition modeling. In the fabrication, a nozzle is used to obtain channels in the skin of the thermoplastic polyurethane, while another nozzle is used to fill MRF in the channels. The specimens are tested by using a universal tensile machine to evaluate the relationships between the load and deflection under two different conditions, without and with permanent magnets. It is empirically shown that the stiffness of the proposed soft structure can be altered by activating the magnetic field.

Denture flask fabrication using fused deposition modeling three-dimensional printing

2020 ◽  
Vol 64 (2) ◽  
pp. 231-234 ◽  
Author(s):  
Heechul Kim ◽  
Doyun Lee ◽  
Soo Young Lee ◽  
Hongso Yang ◽  
Sang-Won Park ◽  
...  
Keyword(s):  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Dimensional Printing

Three-Dimensional Printing of Prenatal Ultrasonographic Diagnosis of Cleft Lip and Palate: Presenting the Needed “Know-How” and Discussing Its Use in Parental Education

2020 ◽  
Vol 57 (8) ◽  
pp. 1041-1044
Author(s):  
Matthias Schlund ◽  
Jean-Marc Levaillant ◽  
Romain Nicot
Keyword(s):  
Parental Education ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
3D Models ◽  
Prenatal Counseling ◽  
Three Dimensional Printing ◽  
3D Printed ◽  
3D Information ◽  
Dimensional Printing

Parental prenatal counseling is of paramount significance since parents often experience an emotional crisis with feelings of disappointment and helplessness. Three-dimensional (3D) printed model of the unborn child’s face presenting with cleft lip and palate, based on ultrasonographic information, could be used to provide visual 3D information, further enhancing the prospective parent’s comprehension of their unborn child’s pathology and morphology, helping them to be psychologically prepared and improving the communication with the caretaking team. Prospective parents appreciate if prenatal counseling is available with the most detailed information as well as additional resources. The technique necessary to create 3D models after ultrasonographic information is explained, and the related costs are evaluated. The use of such models in parental education is then discussed.

Multimaterial printing and characterization for mechanical and surface properties of functionally graded prototype

2019 ◽  
Vol 233 (19-20) ◽  
pp. 6741-6753 ◽  
Author(s):  
Sudhir Kumar ◽  
Rupinder Singh ◽  
TP Singh ◽  
Ajay Batish
Keyword(s):  
Polylactic Acid ◽  
Surface Properties ◽  
Fused Deposition Modeling ◽  
Mechanical Performance ◽  
Three Dimensional ◽  
Surface Hardness ◽  
Functionally Graded ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
Dimensional Printing

In this work, an effort has been made for multimaterial three-dimensional printing of functionally graded prototypes of polylactic acid matrix (tensile specimens as per ASTM D638 type IV) followed by characterization of mechanical and surface properties. The work is an extension of previous reported studies on twin-screw extrusion process for the preparation of multimaterial wires as feedstock filaments in possible three-dimensional printing applications. The results of the study suggest that the highest peak strength (46.28 MPa) and break strength (41.65 MPa) was obtained for multimaterial three-dimensional printed samples at infill density 100%, infill angle 45°, and infill speed of 90 mm/s on commercial open source fused deposition modeling setup. Further surface hardness measurements performed on two extreme surfaces (top surface comprising magnetite (Fe3O4)-reinforced polylactic acid and bottom with polylactic acid without any reinforcement) revealed that the hardness for the bottom layer was more than the hardness for the top layer. From fractured surface analysis (using photomicrographs), it has been observed that the three-dimensional printed samples with low infill density resulted into more void formation due to which the performance while mechanical testing was poor in comparison to samples printed with higher infill density. The results are also supported by rendered images of photomicrographs, which revealed that high roughness value of samples printed with low infill density was also one of the reasons for poor mechanical performance of multimaterial three-dimensional printed functionally graded prototypes.

scholarly journals Development of a computer-aided engineering–supported process for the manufacturing of customized orthopaedic devices by three-dimensional printing onto textile surfaces

2020 ◽  
Vol 15 ◽  
pp. 155892502091762
Author(s):  
Dustin Ahrendt ◽  
Arturo Romero Karam
Keyword(s):  
Three Dimensional ◽  
Computer Aided Engineering ◽  
Two Dimensional ◽  
Three Dimensional Printing ◽  
Textile Materials ◽  
Fused Deposition ◽  
Custom Made ◽  
Computer Aided ◽  
Dimensional Printing ◽  
Textile Fabric

Today, additive manufacturing, also called three-dimensional printing, is used for producing prototypes as well as other products for various industrial sectors. Although this technology is already well established in the automotive, aviation and space travel, building, dental and medical sectors, its integration in the textile and ready-made industry is still in progress. At present, there is a lack of specific application scenarios for the combination of three-dimensional printing and textile materials, apart from fashion and shoe design. Hence, this article presents a digital computer-aided engineering–supported process to manufacture customized orthopaedic devices by three-dimensional printing directly onto a textile fabric. State-of-the-art fabrication methods for orthoses are typically labour intensive. The combination of three-dimensional scanning, computer-aided design modelling and three-dimensional printing onto textile materials open up new possibilities for producing custom-made products. After three-dimensional scanning of a patient’s individual body shape, the surface is prepared for constructing the textile pattern cuts by reverse engineering. The transformation of the designed three-dimensional patterns into two-dimensional is software supported. Additional positioning lines in accordance with specific body measurements are transferred onto the two-dimensional pattern cuts, which are then used as the basis for the design of the three-dimensional printed functional elements. Subsequently, the design is saved in STL (Standard Triangulation/Tessellation Language) file format, prepared by slicing and directly printed onto textile pattern cuts by means of fused deposition modelling. The last manufacturing step involves the assembly of the textile fabric. The proposed process is demonstrated by an example application scenario, thus proving its potential for industrial use in the textile and ready-made industry.

Sign in / Sign up

Export Citation Format

Share Document