Coupling the Earth system model INMCM with the biogeochemical flux model

2018 ◽  
Vol 33 (6) ◽  
pp. 325-331
Author(s):  
Ilya A. Chernov ◽  
Nikolay G. Iakovlev
Keyword(s):  
Climate Model ◽  
World Ocean ◽  
Coupled Model ◽  
Horizontal Resolution ◽  
Ocean Model ◽  
Earth System Model ◽  
System Model ◽  
Earth System ◽  
Time Step ◽  
The Earth

Abstract In the present paper we consider the first results of modelling the World Ocean biogeochemistry system within the framework of the Earth system model: a global atmosphere-ocean-ice-land-biogeochemistry model. It is based on the INMCM climate model (version INMCM39) coupled with the pelagic ecosystem model BFM. The horizontal resolution was relatively low: 2∘ × 2.5∘ for the ‘longitude’ and ‘latitude’ in transformed coordinates with the North Pole moved to land, 33 non-equidistant σ-horizons, 1 hour time step. We have taken into account 54 main rivers worldwide with run–off supplied by the atmosphere submodel. The setup includes nine plankton groups, 60 tracers in total. Some components sink with variable speed. We discuss challenges of coupling the BFM with the σ-coordinate ocean model. The presented results prove that the model output is realistic in comparison with the observed data, the numerical efficiency is high enough, and the coupled model may serve as a basis for further simulations of the long-term climate change.

scholarly journals The EC-Earth3 Earth System Model for the Climate Model Intercomparison Project 6

2021 ◽  
Author(s):  
Ralf Döscher ◽  
Mario Acosta ◽  
Andrea Alessandri ◽  
Peter Anthoni ◽  
Almut Arneth ◽  
...  
Keyword(s):  
Physical Performance ◽  
Performance Metrics ◽  
Climate Model ◽  
Earth System Model ◽  
System Model ◽  
Historical Period ◽  
Earth System ◽  
Dynamic Features ◽  
The Earth ◽  
Intercomparison Project

Abstract. The Earth System Model EC-Earth3 for contributions to CMIP6 is documented here, with its flexible coupling framework, major model configurations, a methodology for ensuring the simulations are comparable across different HPC systems, and with the physical performance of base configurations over the historical period. The variety of possible configurations and sub-models reflects the broad interests in the EC-Earth community. EC-Earth3 key performance metrics demonstrate physical behaviour and biases well within the frame known from recent CMIP models. With improved physical and dynamic features, new ESM components, community tools, and largely improved physical performance compared to the CMIP5 version, EC-Earth3 represents a clear step forward for the only European community ESM. We demonstrate here that EC-Earth3 is suited for a range of tasks in CMIP6 and beyond.

Recent developments on the Earth System Model Evaluation Tool

2021 ◽  
Author(s):  
Bouwe Andela ◽  
Fakhereh Alidoost ◽  
Lukas Brunner ◽  
Jaro Camphuijsen ◽  
Bas Crezee ◽  
...  
Keyword(s):  
Model Evaluation ◽  
Performance Metrics ◽  
Climate Model ◽  
Earth System Model ◽  
System Model ◽  
Earth System ◽  
Evaluation Tool ◽  
Scientific Review ◽  
The Earth ◽  
User Friendly

<p>The Earth System Model Evaluation Tool (ESMValTool) is a free and open-source community diagnostic and performance metrics tool for the evaluation of Earth system models such as those participating in the Coupled Model Intercomparison Project (CMIP). Version 2 of the tool (Righi et al. 2020, www.esmvaltool.org) features a brand new design composed of a core that finds and processes data according to a ‘recipe’ and an extensive collection of ready-to-use recipes and associated diagnostic codes for reproducing results from published papers. Development and discussion of the tool (mostly) takes place in public on https://github.com/esmvalgroup and anyone with an interest in climate model evaluation is welcome to join there.</p><p> </p><p>Since the initial release of version 2 in the summer of 2020, many improvements have been made to the tool. It is now more user friendly with extensive documentation available on docs.esmvaltool.org and a step by step online tutorial. Regular releases, currently planned three times a year, ensure that recent contributions become available quickly while still ensuring a high level of quality control. The tool can be installed from conda, but portable docker and singularity containers are also available.</p><p> </p><p>Recent new features include a more user-friendly command-line interface, citation information per figure including CMIP6 data citation using ES-DOC, more and faster preprocessor functions that require less memory, automatic corrections for a larger number of CMIP6 datasets, support for more observational and reanalysis datasets, and more recipes and diagnostics.</p><p> </p><p>The tool is now also more reliable, with improved automated testing through more unit tests for the core, as well as a recipe testing service running at DKRZ for testing the scientific recipes and diagnostics that are bundled into the tool. The community maintaining and developing the tool is growing, making the project less dependent on individual contributors. There are now technical and scientific review teams that review new contributions for technical quality and scientific correctness and relevance respectively, two new principal investigators for generating a larger support base in the community, and a newly created user engagement team that is taking care of improving the overall user experience.</p>

scholarly journals Setup of the PMIP3 paleoclimate experiments conducted using an Earth System Model, MIROC-ESM

2012 ◽  
Vol 5 (3) ◽  
pp. 2527-2569 ◽  
Author(s):  
T. Sueyoshi ◽  
R. Ohgaito ◽  
A. Yamamoto ◽  
M. O. Chikamoto ◽  
T. Hajima ◽  
...  
Keyword(s):  
Climate Model ◽  
Coupled Model ◽  
Earth System Model ◽  
Future Climate ◽  
System Model ◽  
Climate Feedback ◽  
Climate Projections ◽  
Earth System ◽  
Intergovernmental Panel ◽  
Intercomparison Project

Abstract. The importance of climate model evaluation using paleoclimate simulations for better future climate projections has been recognized by the Intergovernmental Panel on Climate Change. In recent years, Earth System Models (ESMs) were developed to investigate carbon-cycle climate feedback, as well as to project the future climate. Paleoclimate events, especially those associated with the variations in atmospheric CO2 level or land vegetation, provide suitable benchmarks to evaluate ESMs. Here we present implementations of the paleoclimate experiments proposed by the Coupled Model Intercomparison Project phase 5/Paleoclimate Modelling Intercomparison Project phase 3 (CMIP5/PMIP3) using an Earth System Model, MIROC-ESM. In this paper, experimental settings and procedures of the mid-Holocene, the Last Glacial Maximum, and the Last Millennium experiments are explained. The first two experiments are time slice experiments and the last one is a transient experiment. The complexity of the model requires various steps to correctly configure the experiments. Several basic outputs are also shown.

Hindcast Simulation of Medicanes with an Atmosphere-Ocean-Wave Coupled Modelling System

2020 ◽  
Author(s):  
Fulden Batıbeniz ◽  
Barış Önol ◽  
Ufuk Utku Turuncoglu
Keyword(s):  
Climate Model ◽  
Coupled Model ◽  
Wave Model ◽  
Earth System Model ◽  
System Model ◽  
Climate Projections ◽  
Earth System ◽  
The Mediterranean ◽  
Modelling System ◽  
Research Grant

<p>Tropical-like Mediterranean storms associated with strong winds, low pressure centers and extreme precipitation are called medicanes. These devastating storms threaten the coastal regions and some small islands in the Mediterranean. Recent studies including future climate projections indicate that the intensity of medicanes could increase under the climate change conditions. Therefore it is important to improve a comprehensive understanding of the medicanes and theirs occurrence processes including thermodynamic mechanisms between the atmosphere and the sea. In pursuing these mechanisms, we use reanalysis/observations (ECMWF’s ERA5 and MyOCEAN etc.) and coupled Regional Earth System Model (RegESM). The RegESM model is run in coupled mode (Regional Climate Model-RegCM4-12km coupled with Regional Ocean Modelling System-ROMS-1/12<sup>°</sup>, and Wave Model-WAM-0.125<sup>°</sup>) and uncoupled mode (RegCM4 only-12km) for 1979-2012 period over the Med-CORDEX domain prescribed under the CORDEX framework. Additionally, standalone simulation of RegCM4 has been forced by Era-Interim Reanalysis over the Med-CORDEX domain and the standalone simulation of the wave model (WAM) has been forced by the standalone RegCM4 wind field (12 km horizontal resolution) for the Mediterranean Sea.</p><p>We analyze the ability of the coupled and uncoupled models to reproduce the characteristics of the observed medicanes and to investigate the role of air-sea interaction in the simulation of key processes that govern medicane occurrences over the study area. In general, the spatial extent and the timing of the observed medicanes better simulated with the coupled model. The reason behind this better replication with the coupled model is the wave model’s interactive contribution with the roughness length to the surface winds, which allows necessary conditions for medicane formation. Our results also reveals that the recently developed modeling system RegESM incorporates atmosphere, ocean and wave components and thereby is better capable to improve the understanding of the mechanisms driving medicanes.</p><p><strong>Keywords </strong>Regional earth system model, Ocean-atmosphere-wave coupling, Medicanes</p><p><strong>Acknowledgements</strong> This study has been supported by a research grant 40248 by the Scientific Research Projects Coordination Unit of Istanbul Technical University (ITU) and  a research grant (116Y136) provided by The Scientific and Technological Research Council of Turkey (TUBITAK). The computing resources used in this work were provided by the National Center for High Performance Computing of Turkey (UHEM) under grant number 5004782017.</p>

scholarly journals Representation of the Community Earth System Model (CESM1) CAM4-chem within the Chemistry-ClimateModel Initiative (CCMI)

2016 ◽  
Author(s):  
S. Tilmes ◽  
J.-F. Lamarque ◽  
L. K. Emmons ◽  
D. E. Kinnison ◽  
D. Marsh ◽  
...  
Keyword(s):  
Climate Model ◽  
Evaluation Studies ◽  
Surface Ozone ◽  
Atmospheric Model ◽  
Horizontal Resolution ◽  
Earth System Model ◽  
System Model ◽  
Good Representation ◽  
Earth System ◽  
Community Earth System Model

Abstract. The Community Earth System Model, CESM1 CAM4-chem has been used to perform the Chemistry Climate Model Initiative (CCMI) reference and sensitivity simulations. In this model, the Community Atmospheric Model Version 4 (CAM4) is fully coupled to tropospheric and stratospheric chemistry. Details and specifics of each configuration, including new developments and improvements are described. CESM1 CAM4-chem is a low top model that reaches up to approximately 40 km and uses a horizontal resolution of 1.9° latitude and 2.5° longitude. For the specified dynamics experiments, the model is nudged to Modern-Era Retrospective Analysis For Research And Applications (MERRA) reanalysis. We summarize the performance of the three reference simulations suggested by CCMI, with a focus on the observed period. Comparisons with elected datasets are employed to demonstrate the general performance of the model. We highlight new datasets that are suited for multi-model evaluation studies. Most important improvements of the model are the treatment of stratospheric aerosols and the corresponding adjustments for radiation and optics, the updated chemistry scheme including improved polar chemistry and stratospheric dynamics, and improved dry deposition rates. These updates lead to a very good representation of tropospheric ozone within 20 % of values from available observations for most regions. In particular, the trend and magnitude of surface ozone has been much improved compared to earlier versions of the model. Furthermore, stratospheric column ozone of the Southern Hemisphere in winter and spring is reasonably well represented. All experiments still underestimate CO most significantly in Northern Hemisphere spring and show a significant underestimation of hydrocarbons based on surface observations.

scholarly journals Coupling of a sediment diagenesis model (MEDUSA) and an Earth system model (CESM1.2): a contribution toward enhanced marine biogeochemical modelling and long-term climate simulations

2019 ◽  
Author(s):  
Takasumi Kurahashi-Nakamura ◽  
André Paul ◽  
Guy Munhoven ◽  
Ute Merkel ◽  
Michael Schulz
Keyword(s):  
Climate Models ◽  
Climate Model ◽  
Coupled Model ◽  
Earth System Model ◽  
System Model ◽  
Future Application ◽  
Coupling Scheme ◽  
Earth System ◽  
Climate Simulations

Abstract. We developed a coupling scheme for the Community Earth System Model version 1.2 (CESM1.2) and the Model of Early Diagenesis in the Upper Sediment of Adjustable complexity (MEDUSA), and explored the effects of the coupling on solid components in the upper sediment and on bottom seawater chemistry by comparing the coupled model's behaviour with that of the uncoupled CESM having a simplified treatment of sediment processes. CESM is a fully-coupled atmosphere-ocean-sea ice-land model and its ocean component (the Parallel Ocean Program version 2, POP2) includes a biogeochemical component (BEC). MEDUSA was coupled to POP2 in an off-line manner so that each of the models ran separately and sequentially with regular exchanges of necessary boundary condition fields. This development was done with the ambitious aim of a future application for long-term (spanning a full glacial cycle; i.e., ~ 105 years) climate simulations with a state-of-the-art comprehensive climate model including the carbon cycle, and was motivated by the fact that until now such simulations have been done only with less-complex climate models. We found that the sediment-model coupling already had non-negligible immediate advantages for ocean biogeochemistry in millennial-time-scale simulations. First, the MEDUSA-coupled CESM outperformed the uncoupled CESM in reproducing an observation-based global distribution of sediment properties, especially for organic carbon and opal. Thus, the coupled model is expected to act as a better bridge between climate dynamics and sedimentary data, which will provide another measure of model performance. Second, in our experiments, the MEDUSA-coupled model and the uncoupled model had a difference of 0.2‰ or larger in terms of δ13C of bottom water over large areas, which implied potential significant model biases for bottom seawater chemical composition due to a different way of sediment treatment. Such a model bias would be a fundamental issue for paleo model–data comparison often relying on data derived from benthic foraminifera.

scholarly journals Development and evaluation of an Earth-System model – HadGEM2

2011 ◽  
Vol 4 (4) ◽  
pp. 1051-1075 ◽  
Author(s):  
W. J. Collins ◽  
N. Bellouin ◽  
M. Doutriaux-Boucher ◽  
N. Gedney ◽  
P. Halloran ◽  
...  
Keyword(s):  
Climate Model ◽  
Coupled Model ◽  
Earth System Model ◽  
Tropospheric Chemistry ◽  
System Model ◽  
Earth System ◽  
Evaluation Phase ◽  
System Components ◽  
The Individual ◽  
Hadley Centre

Abstract. We describe here the development and evaluation of an Earth system model suitable for centennial-scale climate prediction. The principal new components added to the physical climate model are the terrestrial and ocean ecosystems and gas-phase tropospheric chemistry, along with their coupled interactions. The individual Earth system components are described briefly and the relevant interactions between the components are explained. Because the multiple interactions could lead to unstable feedbacks, we go through a careful process of model spin up to ensure that all components are stable and the interactions balanced. This spun-up configuration is evaluated against observed data for the Earth system components and is generally found to perform very satisfactorily. The reason for the evaluation phase is that the model is to be used for the core climate simulations carried out by the Met Office Hadley Centre for the Coupled Model Intercomparison Project (CMIP5), so it is essential that addition of the extra complexity does not detract substantially from its climate performance. Localised changes in some specific meteorological variables can be identified, but the impacts on the overall simulation of present day climate are slight. This model is proving valuable both for climate predictions, and for investigating the strengths of biogeochemical feedbacks.

scholarly journals Carbon isotopes in the ocean model of the Community Earth System Model (CESM1)

2014 ◽  
Vol 7 (6) ◽  
pp. 7461-7503 ◽  
Author(s):  
A. Jahn ◽  
K. Lindsay ◽  
X. Giraud ◽  
N. Gruber ◽  
B. L. Otto-Bliesner ◽  
...  
Keyword(s):  
Gas Exchange ◽  
Carbon Isotope ◽  
Carbon Isotopes ◽  
Climate Model ◽  
Ocean Model ◽  
Earth System Model ◽  
System Model ◽  
Earth System ◽  
Carbonate Formation ◽  
Community Earth System Model

Abstract. Carbon isotopes in the ocean are frequently used as paleo climate proxies and as present-day geochemical ocean tracers. In order to allow a more direct comparison of climate model results with this large and currently underutilized dataset, we added a carbon isotope module to the ocean model of the Community Earth System Model (CESM), containing the cycling of the stable isotope 13C and the radioactive isotope 14C. We implemented the 14C tracer in two ways: in the "abiotic" case, the 14C tracer is only subject to air–sea gas exchange, physical transport, and radioactive decay, while in the "biotic" version, the 14C additionally follows the 13C tracer through all biogeochemical and ecological processes. Thus, the abiotic 14C tracer can be run without the ecosystem module, requiring significantly less computational resources. The carbon isotope module calculates the carbon isotopic fractionation during gas exchange, photosynthesis, and calcium carbonate formation, while any subsequent biological process such as remineralization as well as any external inputs are assumed to occur without fractionation. Given the uncertainty associated with the biological fractionation during photosynthesis, we implemented and tested three parameterizations of different complexity. Compared to present-day observations, the model is able to simulate the oceanic 14C bomb uptake and the 13C Suess effect reasonably well compared to observations and other model studies. At the same time, the carbon isotopes reveal biases in the physical model, for example a too sluggish ventilation of the deep Pacific Ocean.

scholarly journals The Norwegian Earth System Model, NorESM1-M – Part 1: Description and basic evaluation of the physical climate

2013 ◽  
Vol 6 (3) ◽  
pp. 687-720 ◽  
Author(s):  
M. Bentsen ◽  
I. Bethke ◽  
J. B. Debernard ◽  
T. Iversen ◽  
A. Kirkevåg ◽  
...  
Keyword(s):  
Model Performance ◽  
Internal Variability ◽  
Horizontal Resolution ◽  
Ocean Model ◽  
Earth System Model ◽  
System Model ◽  
Earth System ◽  
Climate System Model ◽  
Model Stability ◽  
The University

Abstract. The core version of the Norwegian Climate Center's Earth System Model, named NorESM1-M, is presented. The NorESM family of models are based on the Community Climate System Model version 4 (CCSM4) of the University Corporation for Atmospheric Research, but differs from the latter by, in particular, an isopycnic coordinate ocean model and advanced chemistry–aerosol–cloud–radiation interaction schemes. NorESM1-M has a horizontal resolution of approximately 2° for the atmosphere and land components and 1° for the ocean and ice components. NorESM is also available in a lower resolution version (NorESM1-L) and a version that includes prognostic biogeochemical cycling (NorESM1-ME). The latter two model configurations are not part of this paper. Here, a first-order assessment of the model stability, the mean model state and the internal variability based on the model experiments made available to CMIP5 are presented. Further analysis of the model performance is provided in an accompanying paper (Iversen et al., 2013), presenting the corresponding climate response and scenario projections made with NorESM1-M.

scholarly journals IPSL-CM5A2. An Earth System Model designed for multi-millennial climate simulations

2019 ◽  
Author(s):  
Pierre Sepulchre ◽  
Arnaud Caubel ◽  
Jean-Baptiste Ladant ◽  
Laurent Bopp ◽  
Olivier Boucher ◽  
...  
Keyword(s):  
Coupled Model ◽  
Ocean Model ◽  
Earth System Model ◽  
Meridional Overturning Circulation ◽  
System Model ◽  
Cold Bias ◽  
Specific Work ◽  
Earth System ◽  
Deep Time ◽  
Historical Simulation

Abstract. Based on the CMIP5-generation previous IPSL earth system model, we designed a new version, IPSL-CM5A2, aiming at running multi-millennial simulations typical of deep-time paleoclimates studies. Three priorities were followed during the set-up of the model: (1) improving the overall model computing performance, (2) overcoming a persistent cold bias depicted in the previous model generation, and (3) making the model able to handle the specific continental configurations of the geological past. Technical developments have been performed on separate components and on the coupling system to speed up the whole coupled model. These developments include the integration of hybrid parallelization MPI-OpenMP in LMDz atmospheric component, the use of a new library to perform parallel asynchronous input/output by using computing cores as “IO servers”, the use of a parallel coupling library between the ocean and the atmospheric components. The model can now simulate ~100 years per day, opening new possibilities towards the production of multi-millennial simulations with a full earth system model. The tuning strategy employed to overcome a persistent cold bias is detailed. The confrontation of an historical simulation to climatological observations shows overall improved ocean meridional overturning circulation, marine productivity and latitudinal position of zonal wind patterns. We also present the numerous steps required to run the IPSL-CM5A2 for deep-time paleoclimates through a preliminary case-study for the Cretaceous. Namely, a specific work on the ocean model grid was required to run the model for specific continental configurations in which continents are relocated according to past paleogeographic reconstructions. By briefly discussing the spin-up of such a simulation, we elaborate on the requirements and challenges awaiting paleoclimate modelling in the next years, namely finding the best trade-off between the level of description of the processes and the computing cost on supercomputers.

Sign in / Sign up

Export Citation Format

Share Document