Microstrip line-fed monopole antenna on an epoxy-resin-reinforced woven-glass material for super wideband applications

2017 ◽  
Vol 24 (3) ◽  
pp. 361-370
Author(s):  
Md. Moinul Islam ◽  
Rabah Wasel Aldhaheri ◽  
Muntasir Mohammad Sheikh ◽  
Mohammad Tariqul Islam ◽  
Md. Samsuzzaman ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Microstrip Line ◽  
Ground Plane ◽  
Surface Current ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Glass Material ◽  
Domain Performance ◽  
Swb Applications

AbstractA microstrip line-fed monopole antenna is proposed for super wideband (SWB) applications printed on an epoxy-resin-reinforced woven-glass material. The reported SWB antenna has been made of a rectangular partial ground plane with an L-type slit and a heart-shaped radiating patch. This antenna is connected precisely by a tapered feed line that provides SWB greater than ultra-wideband. The heart-shaped radiating patch and the partial ground plane containing a gap and an L-type slit on ground plane also play paramount roles to procure wide impedance bandwidth. It is determined from measurements that this antenna contains SWB characteristic [voltage standing wave ratio (VSWR) ≤2] spanning from 1.30 to 40 GHz (187.41%), with a bandwidth dimension ratio (BDR) of 5544.66 and a ratio bandwidth of 30.77:1. Simple construction, sharp surface current flow, much impedance bandwidth, nearly omnidirectional radiation patterns, stable peak gain (2.20–6.06 dBi), time domain performance, and considerable BDR (5544.66) make it a promising candidate for SWB applications.

A dual band-notched ultra-wideband monopole antenna with spiral-slots and folded SIR-DGS as notch band structures

2015 ◽  
Vol 8 (8) ◽  
pp. 1197-1206 ◽  
Author(s):  
Seyed Saeed Mirmosaei ◽  
Seyed Ebrahim Afjei ◽  
Esfandiar Mehrshahi ◽  
Mohammad M. Fakharian
Keyword(s):  
Communication Systems ◽  
Ground Plane ◽  
Surface Current ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Defected Ground Structure ◽  
Notch Band ◽  
Notched Band

In this paper, an ultra-wideband (UWB) planar monopole antenna with impedance bandwidth from 2.83 to 11.56 GHz and dual band-notched characteristics is presented. The antenna consists of a small rectangular ground plane, a bat-shaped radiating patch, anda 50-Ω microstrip line. The notched bands are realized by introducing two different types of structures. The half-wavelength spiral-slots are etched on the radiating patch to obtain a notched band in 5.15 5.925 GHz for WLAN, HIPERLAN, and DSRC systems. Based on the single band-notched UWB antenna, the second notched band is realized by etching a folded stepped impedance resonator as defected ground structure on the ground plane for WiMAX and C-band communication systems. The notched frequencies can be adjusted by altering the length of resonant cells. Surface current distributions and equivalent circuit are used to illustrate the notched mechanism. The performance of this antenna both by simulation and by experiment indicates that the proposed antenna is suitable and a good candidate for UWB applications.

Super wideband printed monopole antenna for ultra wideband applications

2015 ◽  
Vol 9 (1) ◽  
pp. 133-141 ◽  
Author(s):  
Sandeep Kumar Palaniswamy ◽  
Malathi Kanagasabai ◽  
Shrivastav Arun Kumar ◽  
M. Gulam Nabi Alsath ◽  
Sangeetha Velan ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Wide Band ◽  
Local Area ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Compact Size

This paper presents the design, testing, and analysis of a clover structured monopole antenna for super wideband applications. The proposed antenna has a wide impedance bandwidth (−10 dB bandwidth) from 1.9 GHz to frequency over 30 GHz. The clover shaped antenna with a compact size of 50 mm × 45 mm is designed and fabricated on an FR4 substrate with a thickness of 1.6 mm. Parametric study has been performed by varying the parameters of the clover to obtain an optimum wide band characteristics. Furthermore, the prototype introduces a method of achieving super wide bandwidth by deploying fusion of elliptical patch geometries (clover shaped) with a semi elliptical ground plane, loaded with a V-cut at the ground. The proposed antenna has a 14 dB bandwidth from 5.9 to 13.1 GHz, which is suitable for ultra wideband (UWB) outdoor propagation. The prototype is experimentally validated for frequencies within and greater than UWB. Transfer function, impulse response, and group delay has been plotted in order to address the time domain characteristics of the proposed antenna with fidelity factor values. The possible applications cover wireless local area network, C-band, Ku-band, K-band operations, Worldwide Interoperability for Microwave Access, and Wireless USB.

scholarly journals Mutual Coupling Reduction Using a Protruded Ground Branch Structure in a Compact UWB Owl-Shaped MIMO Antenna

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
A. Mchbal ◽  
N. Amar Touhami ◽  
H. Elftouh ◽  
A. Dkiouak
Keyword(s):  
Mutual Coupling ◽  
Impedance Matching ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Uwb Applications

A compact ultra-wideband (UWB) multiple input-multiple output (MIMO) antenna with high isolation is designed for UWB applications. The proposed MIMO antenna consists of two identical monopole antenna elements. To enhance the impedance matching, three slots are formed on the ground plane. The arc structure as well as the semicircle with an open-end slot is employed on the radiating elements the fact which helps to extend the impedance bandwidth of the monopole antenna from 3.1 up to 10.6 GHz, which corresponds to the UWB band. A ground branch decoupling structure is introduced between the two elements to reduce the mutual coupling. Simulation and measurement results show a bandwidth range from 3.1 to 11.12 GHz with |S11_|<−15 dB, |S21_|<−20 dB, and ECC < 0.002.

scholarly journals Design of a Compact UWB Antenna with Triple Band-Notched Characteristics

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Qiang Wang ◽  
Yan Zhang
Keyword(s):  
Input Impedance ◽  
Impedance Matching ◽  
Ground Plane ◽  
Surface Current ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Notch Band ◽  
Parametric Studies ◽  
Triple Band

A new compact ultra-wideband (UWB) antenna with triband-notched characteristics is presented. The structure of the proposed antenna is simple and symmetric. A modified ground is introduced to obtain a wide impedance bandwidth of 2.9–13.4 GHz withS11<-10 dB. By inserting two arc-shaped slots in the radiation patch, two sharp bands of 3.3–3.7 GHz and 5.15–5.35 GHz are notched. The notch band of 7.25–7.75 GHz is achieved by etching a U-shaped slot in the ground plane. The notched bands can be controlled, respectively, while the characteristics of the proposed UWB antenna almost keep completely unchanged at the unnotched frequencies. Equivalent circuit models, surface current distributions, and input impedance are applied to analyze the principle of the proposed UWB antenna. Parametric studies are given. Simulated and measured results show that the proposed antenna has good impedance matching, stable radiation patterns, and constant gain.

scholarly journals Design of CPW-fed Star-Shaped Monopole Antenna for UWB Applications using Transmission Line Model

2021 ◽  
Author(s):  
BUDHADEB MAITY ◽  
SISIR KUMAR NAYAK
Keyword(s):  
Transmission Line ◽  
Ground Plane ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Transmission Line Model ◽  
Defected Ground Structure ◽  
Line Model ◽  
Hexagonal Ring ◽  
Uwb Applications

Abstract This article presents a structure of coplanar waveguide (CPW)-fed star-shaped monopole antenna (SSMA) with a pair of quarter-circular-slit (QCS) and partly-hexagonal-ring-slit (PHRS) defected ground structure. By inserting a pair of QCS and PHRS on the rectangular ground plane, an excellent impedance bandwidth is achieved i.e., 139 % (from 2.2--12.21 GHz). The dimension of the SSMA is about 0.286λ l ×0.216λ l mm 2 , where λ l is the wavelength in free space at the lowest operating frequency i.e, 2.2 GHz. The transmission line model (TLM) of the SSMA is presented and it shows the antenna behavior based on the effect of each element. It is observed that the characteristics of the TLM model are close to the simulation result using the CST simulator. From the results, it is observed that the proposed ultra-wideband (UWB) antenna close to omnidirectional radiation patterns and suitable for UWB Applications.

Bird Face Microstrip Printed Monopole Antenna Design for Ultra Wide Band Applications

Frequenz ◽  
2016 ◽  
Vol 70 (11-12) ◽  
Author(s):  
Mohammad Jakir Hossain ◽  
Mohammad Rashed Iqbal Faruque ◽  
Md. Moinul Islam ◽  
Mohammad Tariqul Islam ◽  
Md. Atiqur Rahman
Keyword(s):  
Ground Plane ◽  
Wide Band ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Compact Antenna ◽  
Printed Monopole Antenna ◽  
Printed Monopole ◽  
Microstrip Feed

AbstractIn this paper, a novel bird face microstrip printed monopole ultra-wideband (UWB) antenna is investigated. The proposed compact antenna consists of a ring-shaped with additional slot and slotted ground plane on FR4 material. The overall electrical dimension of the proposed antenna is 0.25 λ×0.36 λ×0.016 λ and is energized by microstrip feed line. The Computer Simulation Technology (CST) and the High Frequency Structural Simulator (HFSS) is applied in this analysis. The impedance bandwidth of the monopole antenna cover 3.1–12.3 GHz (9.2 GHz, BW) frequency range. The messurement displayed that the designed antenna achieved excellent gain and stable omnidirectional radiation patterns within the UWB. The maximum gain of 6.8 dBi and omnidirectional radiation pattern makes the proposed antenna that is suitable for UWB systems.

scholarly journals Conformal Band-Notch UWB Monopole Antenna on Finite Cylindrical Substrates

2013 ◽  
Vol 3 (3) ◽  
pp. 440-445 ◽  
Author(s):  
E. S. Ahmed
Keyword(s):  
Radiation Pattern ◽  
Wireless Lan ◽  
Return Loss ◽  
Ground Plane ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Cylindrical Structures ◽  
Conformal Antennas ◽  
Finite Element Package

A microstrip-fed new UWB monopole antenna with a band-notch characteristic mounted on the finite cylindrical surface is presented. The proposed antenna consists of a rectangular metal radiation patch fed by a 50 ohm microstrip line and a rectangular ground plane. To achieve ultra-wideband, three modifications are introduced. The first one is to blend the upper and lower corners of the radiating plates. The second one is to remove a circular section from the radiating metal. The third one is to blend the upper corners of the ground plane. The antenna is designed on a substrate with dielectric constant εr=3 and 1.6 mm height. The proposed antenna is conformed on finite cylindrical substrates of radiuses 4, 5 and 6 cm. The cylindrical structures were simulated through CST microwave studio finite element package. The simulation results, obtained via CST package on the return losses, VSWR and radiation pattern of the antenna are presented. For both planar and conformal antennas, results show that the impedance bandwidth of the designed antenna is from 2-18 GHz with a return loss less than -10 dB (VSWR<2) and a band rejection of 5-6 GHz for wireless LAN (WLAN), that includes the band 5.15-5.825 GHz limited by IEEE 802.11.a and HIPERLAN/2 with return loss greater than -10dB. The proposed simple shaped conformal antenna provides a good radiation pattern and  gain between 3.84 and 5.96 dBi over the entire frequency band excluding the rejected band.

A bandwidth enhancement and size reduction of monopole microstrip antenna for ultra wideband application

2018 ◽  
Vol 15 (3) ◽  
pp. 330-335
Author(s):  
Saadi Djidel ◽  
Mohamed Bouamar ◽  
Djamel Khedrouche
Keyword(s):  
Ground Plane ◽  
Antenna System ◽  
Monopole Antenna ◽  
Size Reduction ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Content Type ◽  
Bandwidth Enhancement ◽  
Compact Size ◽  
Microstrip Monopole Antenna

PurposeModern wireless communication application requires an antenna system to meet the requirements of miniaturization and wideband characteristic. In recent years, several antenna designs, that meet these requirements, have been proposed in the literature. In this context, the purpose of this paper is to design a new microstrip monopole antenna with a bandwidth enhancement and size reduction for ultra wideband application.Design/methodology/approachThe patch, of leaf of a plant shape, the feed line and the ground plane are printed on the inexpensive FR4 substrate material with permittivity 4.4 and loss tangent 0.02. To obtain optimal dimensions, a parametric study is conducted through numerical computations by using electromagnetic simulators HFSS and CST. A prototype of the optimized antenna is fabricated and subjected to a series of simulations and measurements.FindingsThe measurement results show a −10 dB impedance bandwidth of 6.7 GHz (3.5 GHz-10.2 GHz) which can cover the whole bandwidth requirements of an ultra wideband application. The designed antenna exhibits nearly symmetric and omnidirectional radiations patterns over the operating band, which is a sought-after behavior in microstrip patch antennas and has overall size of 35 × 31 mm2.Originality/valueThe proposed microstrip monopole antenna is very useful for modern wireless communications systems because of its compact size, its capability of covering the whole ultra wideband frequency band and its good radiation characteristics.

Dual-Notched Monopole Antenna Using DGS for WLAN and Wi-MAX Applications

2019 ◽  
Vol 28 (11) ◽  
pp. 1950189
Author(s):  
Arnab De ◽  
Bappadittya Roy ◽  
Anup Kumar Bhattacharjee
Keyword(s):  
Microstrip Line ◽  
Return Loss ◽  
Ground Plane ◽  
Monopole Antenna ◽  
Impedance Bandwidth ◽  
Frequency Range ◽  
Fractional Bandwidth ◽  
Notch Band ◽  
Feeding Technique ◽  
Peak Gain

In this paper, a wideband printed polygon-shaped monopole antenna has been designed using microstrip line feeding technique which provides dual-notch band characteristics (2.98–3.19[Formula: see text]GHz) and (3.62–5.00[Formula: see text]GHz) by the use of slots geometry in both the patch and the ground plane. The results of the antenna have been compared both with and without slots in both planes. The initial antenna without DGS and slots in the patch was made to work in the frequency range from 2.56–5.98[Formula: see text]GHz having impedance bandwidth of about 80.09%. The proposed antenna can be made usable for multi-band applications such as WLAN (2.4/3.2/5.2/5.8[Formula: see text]GHz) and Wi-MAX (3.5 and 5.5[Formula: see text]GHz) applications providing fractional bandwidth (FBW) of 85.36% (2.33–5.80[Formula: see text]GHz) and maximum peak gain of 5.65[Formula: see text]dBi at 3.50[Formula: see text]GHz. The value of return loss obtained is about 53.36[Formula: see text]dB at 2.56[Formula: see text]GHz. Prototype of the final antenna is fabricated and the results are verified with the simulated ones.

scholarly journals A planar UWB semicircular-shaped monopole antenna with quadruple band notch for WiMAX, ARN, WLAN, and X-Band

2020 ◽  
Vol 10 (1) ◽  
pp. 908
Author(s):  
Majed O. Al-Dwairi
Keyword(s):  
Ground Plane ◽  
Surface Current ◽  
Ultra Wideband ◽  
Current Gain ◽  
Impedance Bandwidth ◽  
Frequency Range ◽  
Uwb Antenna ◽  
X Band ◽  
Compact Size ◽  
Narrow Bands

This paper proposed quadruple notched frequency bands ultra-wideband (UWB) antenna. The antenna is a semicircular-shaped monopole type of a compact size 36x24 mm, covering frequency range of 3.02-14 GHz. Four rejected narrow bands including WiMAX (3.3-3.7GHz), ARN (4.2-4.5 GHz), WLAN (5.15-5.825GHz), X-Band (7.25-7.75) have been achieved using inserting slots techniques in the patch, feed line, and ground plane. The slots dimensions have been optimized for the required reject bands. The antenna design and analysis have been investigated by simulation study using CST-EM software package. The antenna characteristics including impedance bandwidth, surface current, gain, radiation efficiency, radiation pattern have been discussed.

Sign in / Sign up

Export Citation Format

Share Document