Experimental Studies of Daytime Running Light Design Factors

1988 ◽  
Vol 32 (15) ◽  
pp. 967-970
Author(s):  
Clifford C. Baker ◽  
Mark Kirkpatrick ◽  
Christopher C. Heasly
Keyword(s):  
Experimental Studies ◽  
Field Tests ◽  
The United States ◽  
Design Parameters ◽  
Accident Rate ◽  
Oncoming Vehicle ◽  
Discomfort Glare ◽  
Daytime Running Lights ◽  
Design Factors ◽  
Research And Design

Data from accident rate field tests have suggested that the use of Daytime Running Lights (DRL) on vehicles may have potential for reduction of collision likelihood and severity. With regard to the possible introduction of DRL in the United States, a number of research and design issues have arisen. These involve effects of design parameters on vehicle conspicuity under daylight conditions including central lamp intensity, beam distribution, lamp area, lamp color, number of lamps, and lamp/background contrast. Experiments were conducted to determine effects of DRL design parameters on peripheral detection of an oncoming vehicle under daylight conditions, detection of operating turn signals in the presence of a masking DRL, and degree of discomfort glare produced by DRL under twilight conditions.

The effects of using passing beams during the day in real traffic conditions

2018 ◽  
Vol 51 (7) ◽  
pp. 1108-1117
Author(s):  
P Kępa ◽  
W Żagan
Keyword(s):  
Road Safety ◽  
Main Part ◽  
Field Tests ◽  
Traffic Conditions ◽  
Oncoming Vehicle ◽  
Daytime Running Lights ◽  
The Impact ◽  
Real Traffic

This paper presents a study on the implications for road safety of the use of passing beams during the day. The genesis of the problem and conditions that have led to the use of passing beams by vehicles during the day is presented first. Then, the photometric requirements for passing beams are evaluated in terms of their signal role, comparing them with the requirements for daytime running lights. The main part of this paper presents a report on field tests carried out under real road conditions. The tests were done in order to measure the impact of using passing beams by day on the distance at which the oncoming vehicle could be detected. Also, the correctness of the estimation of relative positions of oncoming vehicles at the same or different distances was examined with different combinations of passing beams on or off in the tested vehicles. The research confirms the effectiveness of using passing beams during the day and the need to harmonize the obligation to use passing beams.

EXPERIMENTAL STUDIES OF REINFORCED CONCRETE STRUCTURES WITH CROSS-SHAPED SPATIAL CRACK UNDER TORSION WITH BENDING

2020 ◽  
Vol 92 (6) ◽  
pp. 13-25
Author(s):  
Vl.I. KOLCHUNOV ◽  
◽  
A.I. DEMYANOV ◽  
M.M. MIHAILOV ◽  
◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Experimental Determination ◽  
Calculation Method ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Design Parameters ◽  
Reinforced Concrete Structures ◽  
Experimental Scheme

The article offers a method and program for experimental studies of reinforced concrete structures with cross-shaped spatial crack under torsion with bending, the main purpose of which is to check the design assumptions and experimental determination of the design parameters of the proposed calculation method. The conducted experimental studies provide an opportunity to test the proposed calculation apparatus and clarify the regularities for determining deflections, angles of rotation of extreme sections, and stresses in the compressed zone of concrete. For analysis, the article presents a typical experimental scheme for the formation and development of cracks in the form of a sweep, as well as characteristic graphs of the dependence of the angles of rotation of end sections.

Family Influences on Youth Offending

2018 ◽  
pp. 377-403
Author(s):  
Abigail A. Fagan ◽  
Kristen M. Benedini
Keyword(s):  
Life Course ◽  
Family Environment ◽  
Parenting Practices ◽  
Experimental Studies ◽  
The United States ◽  
Parental Violence ◽  
Youth Delinquency ◽  
The Impact ◽  
Children’S Exposure

This chapter reviews the degree to which empirical evidence demonstrates that families influence youth delinquency. Because they are most likely to be emphasized in life-course theories, this chapter focuses on parenting practices such as parental warmth and involvement, supervision and discipline of children, and child maltreatment. It also summarizes literature examining the role of children's exposure to parental violence, family criminality, and young (teenage) parents in affecting delinquency. Because life-course theories are ideally tested using longitudinal data, which allow examination of, in this case, the impact of parenting practices on children's subsequent behaviors, this chapter focuses on evidence generated from prospective studies conducted in the United States and other countries. It also discusses findings from experimental studies designed to reduce youth substance use and delinquency by improving the family environment.

scholarly journals Behavior of a Wild-Type and Two Mutant Strains of Colletotrichum gloeosporioides f. sp. aeschynomene on Northern Jointvetch in the Field

Plant Disease ◽  
1998 ◽  
Vol 82 (4) ◽  
pp. 374-379 ◽  
Author(s):  
Y. Luo ◽  
D. O. TeBeest
Keyword(s):  
Population Density ◽  
Wild Type Strain ◽  
Colletotrichum Gloeosporioides ◽  
Biological Control Agent ◽  
Field Tests ◽  
The United States ◽  
Control Agent ◽  
Sampling Time ◽  
Wild Type ◽  
Mutant Strains

The fungus Colletotrichum gloeosporioides f. sp. aeschynomene causes an anthracnose on Aeschynomene virginica and has been used as a biological control agent to control this weed in the United States. The population dynamics of a wild-type strain (3-1-3) and two mutant strains of 3-1-3 of C. gloeosporioides f. sp. aeschynomene, a benomyl-resistant strain (B21) and nitrate-nonutilizing strain (Nit A), were studied in field tests on northern jointvetch in 1994 and 1995 to determine how the strains interacted on infected plants under field conditions. Plants were co-inoculated with strains 3-1-3 and B21, strains 3-1-3 and Nit A, and strains 3-1-3, B21, and Nit A at equal and unequal initial proportions. Plants were grown and maintained under flooded conditions in small wading pools. In co-inoculation of plants with 3-1-3 and B21 from equal initial proportions, the population of 3-1-3 increased slightly until it reached a proportion of 60 to 70%, whereas the population density of B21 reached 30 to 40% at the end of growing season. From unequal initial proportions, the population density of B21 decreased from 90 to about 50%, whereas the 3-1-3 increased from 10 to 50%. The population density of 3-1-3 increased from an equal initial proportion and was significantly greater than that of Nit A on every sampling time. From unequal initial proportions, the population density of 3-1-3 increased from 10 to 90%, whereas that of Nit A declined. In co-inoculation of plants with the three strains, the population density of 3-1-3 was significantly greater than those of the mutant strains at every sampling time. The proportions of mutant strains within the total population of C. gloeosporioides f. sp. aeschynomene on plants varied according to the test conditions and the number and types of strains co-inoculated.

Use of Digital Twins for Mathematical Modeling of Ultrasonic Cutting of Titanium Blanks

2021 ◽  
Vol 1037 ◽  
pp. 369-376
Author(s):  
Maxim Ilyushkin ◽  
Kirill Savelev ◽  
Oleg Krupennikov ◽  
Evgeniy S. Kiselev
Keyword(s):  
Mathematical Modeling ◽  
Thermal Power ◽  
Experimental Studies ◽  
Ultrasonic Field ◽  
Design Parameters ◽  
Digital Twins ◽  
Machine Parts ◽  
Cutting Processes ◽  
Stock Removal ◽  
Processing Zone

The paper presents the results of numerical experimental studies of cutting titanium blanks using mathematical modeling programs, which make it possible to completely repeat technological processes in a computer (digital twin). The LS-DYNA product was used as a program to simulate the process of stock removal from titanium blank. It has been established that the use of this method adequately describes the cutting processes, including with the introduction of the energy of an ultrasonic field into the processing zone, can significantly reduce the duration of experimental research and evaluate the influence of the elements of the cutting mode and design parameters of the tool on the thermal power aspects of the formation of new surfaces of machine parts.

Deaf and Hard-of-hearing Users Evaluating Designs for Highlighting Key Words in Educational Lecture Videos

2021 ◽  
Vol 14 (4) ◽  
pp. 1-24
Author(s):  
Sushant Kafle ◽  
Becca Dingman ◽  
Matt Huenerfauth
Keyword(s):  
Experimental Study ◽  
Key Words ◽  
Hard Of Hearing ◽  
Experimental Studies ◽  
Design Parameters ◽  
Educational Video ◽  
Word Level ◽  
Sentence Level ◽  
First Occurrence ◽  
Educational Videos

There are style guidelines for authors who highlight important words in static text, e.g., bolded words in student textbooks, yet little research has investigated highlighting in dynamic texts, e.g., captions during educational videos for Deaf or Hard of Hearing (DHH) users. In our experimental study, DHH participants subjectively compared design parameters for caption highlighting, including: decoration (underlining vs. italicizing vs. boldfacing), granularity (sentence level vs. word level), and whether to highlight only the first occurrence of a repeating keyword. In partial contrast to recommendations in prior research, which had not been based on experimental studies with DHH users, we found that DHH participants preferred boldface, word-level highlighting in captions. Our empirical results provide guidance for the design of keyword highlighting during captioned videos for DHH users, especially in educational video genres.

INFLUENCE OF TECHNOLOGICAL FACTORS ON THE EFFICIENCY OF REMOVAL OF SCALE FROM FLATS FOR HOLLOW BALLS

2021 ◽  
pp. 143-147
Author(s):  
А.В. Панфилова ◽  
А.В. Королев ◽  
О.П. Решетникова ◽  
Б.М. Изнаиров ◽  
А.Н. Васин
Keyword(s):  
Rotation Speed ◽  
Experimental Studies ◽  
Surface Cleaning ◽  
Point Of View ◽  
Design Parameters ◽  
Technological Factors ◽  
Proportional Relationship ◽  
Sheet Products ◽  
Process Factors ◽  
Rolled Surface

Рассматриваются результаты проведения экспериментальных исследований способа удаления окалины с поверхности стального листового проката. Предложен новый способ и устройство для очистки поверхности листового проката от окалины режущими пластинами, вращающимися вокруг оси, перемещающейся поступательно вдоль обрабатываемой поверхности. Пластины наклонены в направлении вектора вращения на угол до 10 градусов и упруго поджимаются к обрабатываемой поверхности. Это обеспечивает возможность в процессе очистки поверхности воспроизводить макронеровности листового проката. Приведены результаты экспериментальных исследований, построены математические и графические зависимости, описывающие влияние факторов процесса на эффективность очистки поверхности проката. Показано, что наиболее значимое влияние на параметр оптимизации оказывает сила воздействия инструмента на поверхность заготовки. Причем это влияние реализуется в прямо пропорциональной зависимости. Другие исследованные факторы, а именно: угол наклона пластины, скорость ее вращения и подача, оказывают значительно меньшее влияние на степень очистки проката. Эти исследования были необходимы с точки зрения определения конструктивных параметров силовых элементов как технологической оснастки, реализующей указанный способ, так и технологической установки в целом. План эксперимента был принят, исходя из реальных производственных возможностей индустриального партнера, и соответствовал классическим представлениям теории резания. Описанные результаты дают возможность планировать дальнейшие эксперименты по изучению направлений использования данного способа Here we consider the results of experimental studies of the method of removing scale from the surface of steel sheet products. We propose a new method and device for cleaning the surface of rolled sheets from scale by cutting plates rotating around an axis moving translationally along the treated surface. The plates are tilted in the direction of the rotation vector at an angle of up to 10 degrees and are elastically pressed to the treated surface. This makes it possible to reproduce the macro-dimensions of sheet metal during the surface cleaning process. We present the results of experimental studies. We constructed mathematical and graphical dependences describing the influence of process factors on the efficiency of cleaning the rolled surface. We show that the most significant influence on the optimization parameter is exerted by the force of the tool's impact on the surface of the workpiece. Moreover, this influence is realized in a directly proportional relationship. Other factors studied, namely the angle of inclination of the plate, its rotation speed and feed, have a much smaller impact on the degree of cleaning of rolled products. These studies were necessary from the point of view of determining the design parameters of the power elements of both the technological equipment implementing this method and the technological installation as a whole. We adopted the experimental plan based on the real production capabilities of the industrial partner and corresponded to the classical concepts of the cutting theory. The described results make it possible to plan further experiments to study the directions of using the method

Increased Behavioral Sensitivity to Repeated Experiences of Punishment in Children With ADHD: Experimental Studies Using the Matching Law

2021 ◽  
Vol 25 (12) ◽  
pp. 1665-1665
Author(s):  
Emi Furukawa ◽  
Brent Alsop ◽  
Shizuka Shimabukuro ◽  
Paula Sowerby ◽  
Stephanie Jensen ◽  
...  
Keyword(s):  
Response Times ◽  
Experimental Studies ◽  
The United States ◽  
Matching Law ◽  
Limited Attention ◽  
Time On Task ◽  
Children With Adhd ◽  
Behavioral Sensitivity ◽  
Operant Task ◽  
English Speaking

Background: Research on altered motivational processes in ADHD has focused on reward. The sensitivity of children with ADHD to punishment has received limited attention. We evaluated the effects of punishment on the behavioral allocation of children with and without ADHD from the United States, New Zealand, and Japan, applying the generalized matching law. Methods: Participants in two studies (Furukawa et al., 2017, 2019) were 210 English-speaking (145 ADHD) and 93 Japanese-speaking (34 ADHD) children. They completed an operant task in which they chose between playing two simultaneously available games. Rewards became available every 10 seconds on average, arranged equally across the two games. Responses on one game were punished four times as often as responses on the other. The asymmetrical punishment schedules should bias responding to the less punished alternative. Results: Compared with controls, children with ADHD from both samples allocated significantly more responses to the less frequently punished game, suggesting greater behavioral sensitivity to punishment. For these children, the bias toward the less punished alternative increased with time on task. Avoiding the more punished game resulted in missed reward opportunities and reduced earnings. English-speaking controls showed some preference for the less punished game. The behavior of Japanese controls was not significantly influenced by the frequency of punishment, despite slowed response times after punished trials and immediate shifts away from the punished game, indicating awareness of punishment. Conclusion: Punishment exerted greater control over the behavior of children with ADHD, regardless of their cultural background. This may be a common characteristic of the disorder. Avoidance of punishment led to poorer task performance. Caution is required in the use of punishment, especially with children with ADHD. The group difference in punishment sensitivity was more pronounced in the Japanese sample; this may create a negative halo effect for children with ADHD in this culture.

Sign in / Sign up

Export Citation Format

Share Document