Design of Iosipescu Shear Test for Applying to a Bi-Modulus Ceramic-Fiber-Reinforced SiO2Aerogel

2014 ◽  
Vol 42 (5) ◽  
pp. 20130023 ◽  
Author(s):  
Yantao Sun ◽  
Duoqi Shi ◽  
Xiaoguang Yang
2005 ◽  
Vol 35 (2) ◽  
pp. 296-300 ◽  
Author(s):  
Yiping Ma ◽  
Beirong Zhu ◽  
Muhua Tan

2020 ◽  
Vol 62 (10) ◽  
pp. 1003-1009
Author(s):  
Yantao Sun ◽  
Jia Huang ◽  
Duoqi Shi ◽  
Shengliang Zhang ◽  
Zhizhong Fu ◽  
...  

Abstract Comprehensive characterization mechanical properties of aerogels and their composites are important for engineering design. In particular, some aerogel composites were reported to have varied tension and compression moduli. But conducting tension tests is difficult for the reason that low strength and brittleness will lead to unexpected failure in the non-test area. A method is presented for measuring both the tension and compression moduli of a ceramic-fiber reinforced SiO2 aerogel composite by bending via digital image correlation. First, the relationship between bending behavior and the tension/compression moduli was introduced for bimodular materials. Then a bending test was conducted to predict tension and the compression moduli of the ceramicfiber- reinforced SiO2 aerogel composite via digital image correlation. In addition, uniaxial tension and compression tests of the aerogel composites were carried out, respectively for measuring tension and compression moduli. The tension and compression moduli measured were numerically similar to results obtained from uniaxial tests with a difference of less than 14 %.


1995 ◽  
Vol 4 (4) ◽  
pp. 096369359500400 ◽  
Author(s):  
Jang-Kyo Kim ◽  
Joo Hyuk Park

The stress field arising in tensile loading of the Iosipescu shear test is analyzed by means of finite element method. In a parametric study on a composite laminates-adhesive joint, the tensile loading method is shown more effective in creating a pure shear stress field with negligible normal stresses in the notched area than the conventional compressive loading method, although the maximum shear stress is marginally higher for the former method than the latter.


2013 ◽  
Vol 718-720 ◽  
pp. 157-161
Author(s):  
Zong Hong Xie ◽  
Hai Han Liu ◽  
Jian Zhao ◽  
Jun Feng Sun ◽  
Fei Peng ◽  
...  

A modified test fixture to measure the shear properties of composite laminates was designed and manufactured based upon Iosipescu shear test method. Tests on interlaminar shear propertis of T300/BMI composite laminates were conducted according to ASTM D 5379 test standard. Interlaminar shear stress/strain curves and shear failure modes were obtained. The test results showed that the modified shear test fixture and test method were effective in measuring the shear properties of composite laminates.


1993 ◽  
Vol 21 (4) ◽  
pp. 322 ◽  
Author(s):  
DR Petersen ◽  
DM Blackketter ◽  
EM Odom

Sign in / Sign up

Export Citation Format

Share Document