Nonwoven Fabrics and Synthetic Fiber Papers: Technology and End Uses

Recently, very rapid growth has been observed in the innovations and use of natural-fiber-based materials and composites for acoustic applications due to their environmentally friendly nature, low cost, and good acoustic absorption capability. However, there are still challenges for researchers to improve the mechanical and acoustic properties of natural fiber composites. In contrast, synthetic fiber-based composites have good mechanical properties and can be used in a wide range of structural and automotive applications. This review aims to provide a short overview of the different factors that affect the acoustic properties of natural-fiber-based materials and composites. The various factors that influence acoustic performance are fiber type, fineness, length, orientation, density, volume fraction in the composite, thickness, level of compression, and design. The details of various factors affecting the acoustic behavior of the fiber-based composites are described. Natural-fiber-based composites exhibit relatively good sound absorption capability due to their porous structure. Surface modification by alkali treatment can enhance the sound absorption performance. These materials can be used in buildings and interiors for efficient sound insulation.

Download Full-text

Public stereotypes of recycled water end uses with different human contact: Evidence from event-related potential (ERP)

Resources Conservation and Recycling ◽

10.1016/j.resconrec.2021.105464 ◽

2021 ◽

Vol 168 ◽

pp. 105464

Author(s):

Caixia Hou ◽

Yan Wen ◽

Yuqi He ◽

Xiaojun Liu ◽

Mengmeng Wang ◽

...

Keyword(s):

Event Related Potential ◽

Recycled Water ◽

Human Contact ◽

End Uses

Download Full-text

Characterization of a new natural fiber extracted from Corypha taliera fruit

Scientific Reports ◽

10.1038/s41598-021-87128-8 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

Taslima Ahmed Tamanna ◽

Shah Alimuzzaman Belal ◽

Mohammad Abul Hasan Shibly ◽

Ayub Nabi Khan

Keyword(s):

Tensile Strength ◽

Natural Fiber ◽

Natural Fibers ◽

Morphological Characteristics ◽

Synthetic Fiber ◽

X Ray Diffraction ◽

Reinforced Composite ◽

Potential Alternative

AbstractThis study deals with the determination of new natural fibers extracted from the Corypha taliera fruit (CTF) and its characteristics were reported for the potential alternative of harmful synthetic fiber. The physical, chemical, mechanical, thermal, and morphological characteristics were investigated for CTF fibers. X-ray diffraction and chemical composition characterization ensured a higher amount of cellulose (55.1 wt%) content and crystallinity (62.5%) in the CTF fiber. The FTIR analysis ensured the different functional groups of cellulose, hemicellulose, and lignin present in the fiber. The Scherrer’s equation was used to determine crystallite size 1.45 nm. The mean diameter, specific density, and linear density of the CTF fiber were found (average) 131 μm, 0.86 g/cc, and 43 Tex, respectively. The maximum tensile strength was obtained 53.55 MPa for GL 20 mm and Young’s modulus 572.21 MPa for GL 30 mm. The required energy at break was recorded during the tensile strength experiment from the tensile strength tester and the average values for GL 20 mm and GL 30 mm are 0.05381 J and 0.08968 J, respectively. The thermal analysis ensured the thermal sustainability of CTF fiber up to 230 °C. Entirely the aforementioned outcomes ensured that the new CTF fiber is the expected reinforcement to the fiber-reinforced composite materials.

Download Full-text