Glass as a Material for the Final Disposal of Fission Products

1978 ◽  
Vol 25 (3-4) ◽  
Author(s):  
N. JACQUET-FRANCILLON ◽  
R. BONNIAUD ◽  
C. SOMBRET
Keyword(s):  
Fission Products ◽  
Final Disposal

Comparison of calculated and measured radionuclide inventory of a Zircaloy-4 cladding tube plenum section

MRS Advances ◽  
2018 ◽  
Vol 3 (19) ◽  
pp. 1031-1037 ◽  
Author(s):  
Michel Herm ◽  
Ron Dagan ◽  
Ernesto González-Robles ◽  
Nikolaus Müller ◽  
Volker Metz
Keyword(s):  
Chemical Interaction ◽  
Fission Products ◽  
Minor Actinides ◽  
Final Disposal ◽  
Fuel Pellets ◽  
Activation Products ◽  
Radionuclide Inventory ◽  
Interim Storage ◽  
Modelling Methods ◽  
Good Agreement

ABSTRACTCladding tubes of water-cooled nuclear reactors are usually made of Zircaloy and are an important retaining element for radionuclides present in the fuel both during predisposal activities such as reloading of fuel assemblies from interim storage casks to final disposal casks and during final disposal in the case of canister breaching. However, cladding integrity is affected by various processes during reactor operation and beyond, e.g. fuel cladding chemical interaction and fission product precipitation onto the inner cladding surface. Using experimental and modelling methods, the radionuclide inventory of an irradiated Zircaloy-4 plenum section is analyzed. Quantities of 235/238U, 237Np, 238/239/240/241/242Pu, 241/243Am, 243/244Cm besides 14C, 55Fe, 125Sb, 154Eu, and 134/137Cs were (radio-)chemically determined in digested Zircaloy-4 subsamples. Measured inventories of activation products in the Zr-alloy are in good agreement with calculated values. However, amounts of actinides and fission products exceed the calculated inventory by factor ∼57 (minor actinides and non-volatile fission products) and ∼114 (137Cs). Excess of minor actinides and part of enhanced Cs inventory originate from fuel residues deposited on the inner cladding surface during fuel rod fabrication, whereas vast amount of cesium is volatilized from subjacent fuel pellets and transported to the plenum.

Nuclear Processes Related to the Ap Stars and the Heaviest Chemical Elements

1976 ◽  
Vol 32 ◽  
pp. 169-182
Author(s):  
B. Kuchowicz
Keyword(s):  
Nuclear Physics ◽  
Nuclear Reactions ◽  
Chemical Elements ◽  
Fission Products ◽  
Abundance Pattern ◽  
Isotopic Shifts ◽  
Processed Material ◽  
R Process ◽  
Ap Stars ◽  
Nuclear Processes

SummaryIsotopic shifts in the lines of the heavy elements in Ap stars, and the characteristic abundance pattern of these elements point to the fact that we are observing mainly the products of rapid neutron capture. The peculiar A stars may be treated as the show windows for the products of a recent r-process in their neighbourhood. This process can be located either in Supernovae exploding in a binary system in which the present Ap stars were secondaries, or in Supernovae exploding in young clusters. Secondary processes, e.g. spontaneous fission or nuclear reactions with highly abundant fission products, may occur further with the r-processed material in the surface of the Ap stars. The role of these stars to the theory of nucleosynthesis and to nuclear physics is emphasized.

Irradiation behavior of pyrolytic silicon carbide

1983 ◽  
Vol 41 ◽  
pp. 72-73
Author(s):  
R. J. Lauf
Keyword(s):  
Silicon Carbide ◽  
Fission Products ◽  
Thermodynamics And Kinetics ◽  
Neutron Fluences ◽  
Fuel Particles ◽  
Sic Coatings ◽  
Irradiation Behavior ◽  
Kinetics Of ◽  
Htgr Fuel

Fuel particles for the High-Temperature Gas-Cooled Reactor (HTGR) contain a layer of pyrolytic silicon carbide to act as a miniature pressure vessel and primary fission product barrier. Optimization of the SiC with respect to fuel performance involves four areas of study: (a) characterization of as-deposited SiC coatings; (b) thermodynamics and kinetics of chemical reactions between SiC and fission products; (c) irradiation behavior of SiC in the absence of fission products; and (d) combined effects of irradiation and fission products. This paper reports the behavior of SiC deposited on inert microspheres and irradiated to fast neutron fluences typical of HTGR fuel at end-of-life.

TEM studies of amorphization processes and amorphous structures

1988 ◽  
Vol 46 ◽  
pp. 448-449
Author(s):  
T. E. Mitchell ◽  
R. B. Schwarz
Keyword(s):  
Amorphous Materials ◽  
Fission Products ◽  
Rapid Quenching ◽  
Surface Films ◽  
List Type ◽  
Oxide Glasses ◽  
Crystalline Materials ◽  
Amorphous Structures ◽  
Amorphous Surface ◽  
Interfacial Films

Traditional oxide glasses occur naturally as obsidian and can be made easily by suitable cooling histories. In the past 30 years, a variety of techniques have been discovered which amorphize normally crystalline materials such as metals. These include [1-3]:Rapid quenching from the vapor phase.Rapid quenching from the liquid phase.Electrodeposition of certain alloys, e.g. Fe-P.Oxidation of crystals to produce amorphous surface oxide layers.Interdiffusion of two pure crystalline metals.Hydrogen-induced vitrification of an intermetal1ic.Mechanical alloying and ball-milling of intermetal lie compounds.Irradiation processes of all kinds using ions, electrons, neutrons, and fission products.We offer here some general comments on the use of TEM to study these materials and give some particular examples of such studies.Thin specimens can be prepared from bulk homogeneous materials in the usual way. Most often, however, amorphous materials are in the form of surface films or interfacial films with different chemistry from the substrates.

Fission Products Release from Irradiated FBR MOX Fuel during Transient Conditions.

2003 ◽  
Vol 40 (2) ◽  
pp. 104-113 ◽  
Author(s):  
Isamu SATO ◽  
Toshio NAKAGIRI ◽  
Takashi HIROSAWA ◽  
Sinya MIYAHARA ◽  
Takashi NAMEKAWA
Keyword(s):  
Fission Products ◽  
Transient Conditions ◽  
Mox Fuel

Disposing of John Lindley's library and herbarium: the offer to Australia

2008 ◽  
Vol 35 (1) ◽  
pp. 15-70 ◽  
Author(s):  
A. M. LUCAS
Keyword(s):  
United Kingdom ◽  
Botanic Gardens ◽  
Final Disposal ◽  
The United Kingdom ◽  
Royal Horticultural Society ◽  
Royal Botanic Gardens ◽  
United Kingdom Government ◽  
The University ◽  
Joseph Hooker

Shortly before he died, John Lindley decided to dispose of his herbarium and botanical library. He sold his orchid herbarium to the United Kingdom government for deposit at the Royal Botanic Gardens, Kew, and then offered his library and the remainder of his herbarium to Ferdinand Mueller in Melbourne. On his behalf, Joseph Hooker had earlier unsuccessfully offered the library and remnant herbarium to the University of Sydney, using the good offices of Sir Charles Nicholson. Although neither the University of Sydney nor Mueller was able to raise the necessary funds to purchase either collection, the correspondence allows a reconstruction of a catalogue of Lindley's library, and poses some questions about Joseph Hooker's motives in attempting to dispose of Lindley's material outside the United Kingdom. The final disposal of the herbarium to Cambridge and previous analyses of the purchase of his Library for the Royal Horticultural Society are discussed. A list of the works from Lindley's library offered for sale to Australia is appended.

Plasma parameters in atomic-emission spectral analysis of phosphate concentrates of the fission products

2019 ◽  
Vol 85 (2) ◽  
pp. 17-22
Author(s):  
M. I. Khamdeev ◽  
E. A. Erin
Keyword(s):  
Spectral Analysis ◽  
Chemical Composition ◽  
Reference Materials ◽  
Fission Products ◽  
Atomic Emission ◽  
Electric Arc ◽  
Physical Parameters ◽  
Arc Plasma ◽  
Atomic Emission Spectral Analysis ◽  
Excitation Processes

Physical parameters of electric arc plasma as well as their time dependences are calculated when analyzing phosphate precipitates of the fission products of irradiated nuclear fuel. Phosphate concentrates of the fission products are known for their complex chemical composition and high thermal and chemical stability. Hence, direct atomic emission spectral analysis of phosphate powders without transferring them into solutions is advisable. Different conditions of sample preparation and synthesis of the reference materials determine the different chemical forms of the elements to be determined. This, in turn, affects the kinetics of their evaporation in the electrode crate and excitation processes in the plasma. The known mechanisms of those processes cannot always be transferred to specific conditions of the given method of analysis thus entailing the necessity of studying the effect of the samples chemical composition on the results of determination, proper choice of spectroscopic carriers, detailed study of spectra excitation processes in spectral analysis, and analysis of the physical parameters of the electric arc plasma. We used the lines Zn I 307.206 nm and Zn I 307.589 nm to measure the effective temperature of the central hot sections of the arc in a range of4500 - 6500 K. NaCl, BaCl2 and NaCl + T1C1 were studied to reduce the effect of the sample elemental composition on excitation conditions of the spectra and their stabilization as a spectroscopic carrier. In control experiments we used carrier-free samples. The coincidence of the values of the plasma physical parameters within the measurement error not exceeding 20%, as well as the identity of the nature of the kinetic curves for samples of phosphate precipitates and synthetic reference materials prove their correctness. The result of the study substantiate correctness of the direct atomic-emission spectral procedure in analysis of phosphate concentrates of fission when using synthetic reference materials.

Sign in / Sign up

Export Citation Format

Share Document