scholarly journals Multi-model intercomparisons of air quality simulations for the KORUS-AQ campaign

Elem Sci Anth ◽  
2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Rokjin J. Park ◽  
Yujin J. Oak ◽  
Louisa K. Emmons ◽  
Cheol-Hee Kim ◽  
Gabriele G. Pfister ◽  
...  

The Korea-United States Air Quality (KORUS-AQ) field study was conducted during May–June 2016 to understand the factors controlling air quality in South Korea. Extensive aircraft and ground network observations from the campaign offer an opportunity to address issues in current air quality models and reduce model-observation disagreements. This study examines these issues using model evaluation against the KORUS-AQ observations and intercomparisons between models. Six regional and two global chemistry transport models using identical anthropogenic emissions participated in the model intercomparison study and were used to conduct air quality simulations focusing on ozone (O3), aerosols, and their precursors for the campaign. Using the KORUSv5 emissions inventory, which has been updated from KORUSv1, the models successfully reproduced observed nitrogen oxides (NOx) and volatile organic compounds mixing ratios in surface air, especially in the Seoul Metropolitan Area, but showed systematic low biases for carbon monoxide (CO), implying possible missing CO sources in the inventory in East Asia. Although the DC-8 aircraft-observed O3 precursor mixing ratios were well captured by the models, simulated O3 levels were lower than the observations in the free troposphere in part due to too low stratospheric O3 influxes, especially in regional models. During the campaign, the synoptic meteorology played an important role in determining the observed variability of PM2.5 (PM diameter ≤ 2.5 μm) concentrations in South Korea. The models successfully simulated the observed PM2.5 variability with significant inorganic sulfate-nitrate-ammonium aerosols contribution, but failed to reproduce that of organic aerosols, causing a large inter-model variability. From the model evaluation, we find that an ensemble of model results, incorporating individual models with differing strengths and weaknesses, performs better than most individual models at representing observed atmospheric compositions for the campaign. Ongoing model development and evaluation, in close collaboration with emissions inventory development, are needed to improve air quality forecasting.

2017 ◽  
Vol 17 (17) ◽  
pp. 10315-10332 ◽  
Author(s):  
Hyun Cheol Kim ◽  
Eunhye Kim ◽  
Changhan Bae ◽  
Jeong Hoon Cho ◽  
Byeong-Uk Kim ◽  
...  

Abstract. The impact of regional emissions (e.g., domestic and international) on surface particulate matter (PM) concentrations in the Seoul metropolitan area (SMA), South Korea, and its sensitivities to meteorology and emissions inventories are quantitatively estimated for 2014 using regional air quality modeling systems. Located on the downwind side of strong sources of anthropogenic emissions, South Korea bears the full impact of the regional transport of pollutants and their precursors. However, the impact of foreign emissions sources has not yet been fully documented. We utilized two regional air quality simulation systems: (1) a Weather Research and Forecasting and Community Multi-Scale Air Quality (CMAQ) system and (2) a United Kingdom Met Office Unified Model and CMAQ system. The following combinations of emissions inventories are used: the Intercontinental Chemical Transport Experiment-Phase B, the Inter-comparison Study for Asia 2010, and the National Institute of Environment Research Clean Air Policy Support System. Partial contributions of domestic and foreign emissions are estimated using a brute force approach, adjusting South Korean emissions to 50 %. Results show that foreign emissions contributed  ∼  60 % of SMA surface PM concentration in 2014. Estimated contributions display clear seasonal variation, with foreign emissions having a higher impact during the cold season (fall to spring), reaching  ∼  70 % in March, and making lower contributions in the summer,  ∼  45 % in September. We also found that simulated surface PM concentration is sensitive to meteorology, but estimated contributions are mostly consistent. Regional contributions are also found to be sensitive to the choice of emissions inventories.


Atmosphere ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 790 ◽  
Author(s):  
Jaein I. Jeong ◽  
Rokjin J. Park

We estimate the effects of the anthropogenic fugitive, combustion, and industrial dust (AFCID) on winter air quality in China and South Korea for November 2015–March 2016 using the Comprehensive Regional Emissions inventory for Atmospheric Transport Experiment (KU-CREATE) monthly anthropogenic emission inventory in conjunction with a nested version of GEOS-Chem. Including AFCID emissions in models results in a better agreement with observations and a reduced normalized mean bias of −28% compared to −40% without AFCID. Furthermore, we find that AFCID amounts to winter PM10 concentrations of 17.9 μg m−3 (17%) in eastern China (30−40° N, 112−120° E) with the largest contribution of AFCID to winter PM10 concentrations of up to 45 μg m−3 occurring in eastern China causing a significant impact on air quality to downwind regions. Including AFCID in the model results in an increase of simulated winter PM10 concentrations in South Korea by 3.1 μg m−3 (9%), of which transboundary transport from China accounts for more than 70% of this increased PM10 concentration. Our results indicate that AFCID is an essential factor for winter PM10 concentrations over East Asia and its sources and physical characteristics need to be better quantified to improve PM air quality forecasts.


2016 ◽  
Vol 16 (13) ◽  
pp. 8157-8180 ◽  
Author(s):  
Xinyi Dong ◽  
Joshua S. Fu ◽  
Kan Huang ◽  
Daniel Tong ◽  
Guoshun Zhuang

Abstract. The Community Multiscale Air Quality (CMAQ) model has been further developed in terms of simulating natural wind-blown dust in this study, with a series of modifications aimed at improving the model's capability to predict the emission, transport, and chemical reactions of dust. The default parameterization of initial threshold friction velocity constants are revised to correct the double counting of the impact of soil moisture in CMAQ by the reanalysis of field experiment data; source-dependent speciation profiles for dust emission are derived based on local measurements for the Gobi and Taklamakan deserts in East Asia; and dust heterogeneous chemistry is also implemented. The improved dust module in the CMAQ is applied over East Asia for March and April from 2006 to 2010. The model evaluation result shows that the simulation bias of PM10 and aerosol optical depth (AOD) is reduced, respectively, from −55.42 and −31.97 % by the original CMAQ to −16.05 and −22.1 % by the revised CMAQ. Comparison with observations at the nearby Gobi stations of Duolun and Yulin indicates that applying a source-dependent profile helps reduce simulation bias for trace metals. Implementing heterogeneous chemistry also results in better agreement with observations for sulfur dioxide (SO2), sulfate (SO42−), nitric acid (HNO3), nitrous oxides (NOx), and nitrate (NO3−). The investigation of a severe dust storm episode from 19 to 21 March 2010 suggests that the revised CMAQ is capable of capturing the spatial distribution and temporal variation of dust. The model evaluation also indicates potential uncertainty within the excessive soil moisture used by meteorological simulation. The mass contribution of fine-mode particles in dust emission may be underestimated by 50 %. The revised CMAQ model provides a useful tool for future studies to investigate the emission, transport, and impact of wind-blown dust over East Asia and elsewhere.


2019 ◽  
Vol 19 (3) ◽  
pp. 1801-1818 ◽  
Author(s):  
Daniel L. Goldberg ◽  
Pablo E. Saide ◽  
Lok N. Lamsal ◽  
Benjamin de Foy ◽  
Zifeng Lu ◽  
...  

Abstract. In this work, we investigate the NOx emissions inventory in Seoul, South Korea, using a regional ozone monitoring instrument (OMI) NO2 product derived from the standard NASA product. We first develop a regional OMI NO2 product by recalculating the air mass factors using a high-resolution (4 km × 4 km) WRF-Chem model simulation, which better captures the NO2 profile shapes in urban regions. We then apply a model-derived spatial averaging kernel to further downscale the retrieval and account for the subpixel variability. These two modifications yield OMI NO2 values in the regional product that are 1.37 times larger in the Seoul metropolitan region and >2 times larger near substantial point sources. These two modifications also yield an OMI NO2 product that is in better agreement with the Pandora NO2 spectrometer measurements acquired during the South Korea–United States Air Quality (KORUS-AQ) field campaign. NOx emissions are then derived for the Seoul metropolitan area during the KORUS-AQ field campaign using a top-down approach with the standard and regional NASA OMI NO2 products. We first apply the top-down approach to a model simulation to ensure that the method is appropriate: the WRF-Chem simulation utilizing the bottom-up emissions inventory yields a NOx emissions rate of 227±94 kt yr−1, while the bottom-up inventory itself within a 40 km radius of Seoul yields a NOx emissions rate of 198 kt yr−1. Using the top-down approach on the regional OMI NO2 product, we derive the NOx emissions rate from Seoul to be 484±201 kt yr−1, and a 353±146 kt yr−1 NOx emissions rate using the standard NASA OMI NO2 product. This suggests an underestimate of 53 % and 36 % in the bottom-up inventory using the regional and standard NASA OMI NO2 products respectively. To supplement this finding, we compare the NO2 and NOy simulated by WRF-Chem to observations of the same quantity acquired by aircraft and find a model underestimate. When NOx emissions in the WRF-Chem model are increased by a factor of 2.13 in the Seoul metropolitan area, there is better agreement with KORUS-AQ aircraft observations and the recalculated OMI NO2 tropospheric columns. Finally, we show that by using a WRF-Chem simulation with an updated emissions inventory to recalculate the air mass factor (AMF), there are small differences (∼8 %) in OMI NO2 compared to using the original WRF-Chem simulation to derive the AMF. This suggests that changes in model resolution have a larger effect on the AMF calculation than modifications to the South Korean emissions inventory. Although the current work is focused on South Korea using OMI, the methodology developed in this work can be applied to other world regions using TROPOMI and future satellite datasets (e.g., GEMS and TEMPO) to produce high-quality region-specific top-down NOx emissions estimates.


2017 ◽  
Author(s):  
Eunhye Kim ◽  
Changhan Bae ◽  
Hyun Cheol Kim ◽  
Jeong Hoon Cho ◽  
Byeong-Uk Kim ◽  
...  

Abstract. The impact of regional emissions (e.g., domestic and international) on surface particulate matter (PM) concentrations in the Seoul Metropolitan Area (SMA), South Korea and its sensitivities to meteorology and emissions inventories are quantitatively estimated for 2014 using regional air quality modeling systems. Located on the downwind side of strong sources of anthropogenic emissions, South Korea bears the full impact of the regional transport of pollutants and their precursors. However, the impact of foreign emission sources have not yet been fully documented. We utilized two regional air quality simulation systems: (1) a Weather Research and Forecasting and Community Multi-Scale Air Quality (CMAQ) system; and (2) a United Kingdom Met Office Unified Model and CMAQ system. The following combinations of emission inventories are used: the Intercontinental Chemical Transport Experiment-Phase B, Inter-comparison Study for Asia 2010, and the National Institute of Environment Research Clean Air Policy Support System. Partial contributions of domestic and foreign emissions are estimated using a brute force approach, adjusting South Korean emissions to 50 %. Results show that foreign emissions contributed ~ 65 % of SMA surface PM concentration in 2014. Estimated contributions display clear seasonal variation, with foreign emissions having a higher impact during the cold season (Fall to Spring), reaching ~ 80 % in March, and making lower contributions in the summer, ~ 40 % in July. We also found that simulated surface PM concentration is sensitive to meteorology, but estimated contributions are mostly robust. Regional contributions are also found to be sensitive to the choice of emissions inventories.


2015 ◽  
Vol 8 (10) ◽  
pp. 9373-9413 ◽  
Author(s):  
M. Zhong ◽  
E. Saikawa ◽  
Y. Liu ◽  
V. Naik ◽  
L. W. Horowitz ◽  
...  

Abstract. We conducted simulations using the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) version 3.5 to study air quality in East and South Asia at a spatial resolution of 20 km × 20 km. We find large discrepancies between two existing emissions inventories: the Regional Emission Inventory in Asia version 2 (REAS) and the Emissions Database for Global Atmospheric Research version 4.2 (EDGAR) at the provincial level in China, with maximum differences up to 500 % for CO emissions, 190 % for NO, and 160 % for primary PM10. Such differences in the magnitude and the spatial distribution of emissions for various species lead to 40–70 % difference in surface PM10 concentrations, 16–20 % in surface O3 mixing ratios, and over 100 % in SO2 and NO2 mixing ratios in the polluted areas of China. Our sensitivity run shows WRF-Chem is sensitive to emissions, with the REAS-based simulation reproducing observed concentrations and mixing ratios better than the EDGAR-based simulation for July 2007. We conduct further model simulations using REAS emissions for January, April, July, and October in 2007 and evaluate simulations with available ground-level observations. The model results show clear regional variations in the seasonal cycle of surface PM10 and O3 over East and South Asia. The model meets the air quality model performance criteria for both PM10 (mean fractional bias, MFB ≤ ± 60 %) and O3 (MFB ≤ ± 15 %) in most of the observation sites, although the model underestimates PM10 over Northeast China in January. The model predicts the observed SO2 well at sites in Japan, while it tends to overestimate SO2 in China in July and October. The model underestimates most observed NO2 in all four months. These findings suggest that future model development and evaluation of emission inventories and models are needed for particulate matter and gaseous pollutants in East and South Asia.


Elem Sci Anth ◽  
2019 ◽  
Vol 7 ◽  
Author(s):  
Yujin J. Oak ◽  
Rokjin J. Park ◽  
Jason R. Schroeder ◽  
James H. Crawford ◽  
Donald R. Blake ◽  
...  

We examine O3 production and its sensitivity to precursor gases and boundary layer mixing in Korea by using a 3-D global chemistry transport model and extensive observations during the KORea-US cooperative Air Quality field study in Korea, which occurred in May–June 2016. During the campaign, observed aromatic species onboard the NASA DC-8 aircraft, especially toluene, showed high mixing ratios of up to 10 ppbv, emphasizing the importance of aromatic chemistry in O3 production. To examine the role of VOCs and NOx in O3 chemistry, we first implement a detailed aromatic chemistry scheme in the model, which reduces the normalized mean bias of simulated O3 mixing ratios from –26% to –13%. Aromatic chemistry also increases the average net O3 production in Korea by 37%. Corrections of daytime PBL heights, which are overestimated in the model compared to lidar observations, increase the net O3 production rate by ~10%. In addition, increasing NOx emissions by 50% in the model shows best performance in reproducing O3 production characteristics, which implies that NOx emissions are underestimated in the current emissions inventory. Sensitivity tests show that a 30% decrease in anthropogenic NOx emissions in Korea increases the O3 production efficiency throughout the country, making rural regions ~2 times more efficient in producing O3 per NOx consumed. Simulated O3 levels overall decrease in the peninsula except for urban and other industrial areas, with the largest increase (~6 ppbv) in the Seoul Metropolitan Area (SMA). However, with simultaneous reductions in both NOx and VOCs emissions by 30%, O3 decreases in most of the country, including the SMA. This implies the importance of concurrent emission reductions for both NOx and VOCs in order to effectively reduce O3 levels in Korea.


2021 ◽  
Vol 13 (10) ◽  
pp. 1877
Author(s):  
Ukkyo Jeong ◽  
Hyunkee Hong

Since April 2018, the TROPOspheric Monitoring Instrument (TROPOMI) has provided data on tropospheric NO2 column concentrations (CTROPOMI) with unprecedented spatial resolution. This study aims to assess the capability of TROPOMI to acquire high spatial resolution data regarding surface NO2 mixing ratios. In general, the instrument effectively detected major and moderate sources of NO2 over South Korea with a clear weekday–weekend distinction. We compared the CTROPOMI with surface NO2 mixing ratio measurements from an extensive ground-based network over South Korea operated by the Korean Ministry of Environment (SKME; more than 570 sites), for 2019. Spatiotemporally collocated CTROPOMI and SKME showed a moderate correlation (correlation coefficient, r = 0.67), whereas their annual mean values at each site showed a higher correlation (r = 0.84). The CTROPOMI and SKME were well correlated around the Seoul metropolitan area, where significant amounts of NO2 prevailed throughout the year, whereas they showed lower correlation at rural sites. We converted the tropospheric NO2 from TROPOMI to the surface mixing ratio (STROPOMI) using the EAC4 (ECMWF Atmospheric Composition Reanalysis 4) profile shape, for quantitative comparison with the SKME. The estimated STROPOMI generally underestimated the in-situ value obtained, SKME (slope = 0.64), as reported in previous studies.


Sign in / Sign up

Export Citation Format

Share Document