Effect of wet processing and chemical finishing on fabric hand

Author(s):  
C TOMASINO
Keyword(s):  
2013 ◽  
Vol 3 (1) ◽  
pp. 45-50
Author(s):  
Dwi Dian Praptanto ◽  
Kurnia Herlina Dewi ◽  
Bosman Sidebang

The purpose of this study is to examine the effect of drying time in weight and water content, combination effect of drying time and size of the material, and consumer acceptance to the product in the wet processing of chili blocks production. Method used in the research is completely randomized design (CRD) with two factorials are material size and drying time. Data were analyzed using ANOVA and further analysis using DMRT at 5% significance level. Organoleptic test result was analyzed using the Kruskal-Wallis and Tukey test for further analysis. Application of the equal drying time to two different size of material: rough and finest block chili, showed the result that water content of the rough block chili is lower than the finest block chilli. Application of the different drying time duration to the same size of chili showed the lower water content with increasing duration of drying time. The water content of the material tends to decrease with increasing duration of drying time. The level of consumer’s preferences to the product of wet processing of chili blocks production is equal for scents, but it’s different for color, texture and overall preferences.


2021 ◽  
pp. 161-180
Author(s):  
Stefanie Wahl ◽  
Sylke Meyer

Foods ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 5
Author(s):  
Paola Littardi ◽  
Massimiliano Rinaldi ◽  
Maria Grimaldi ◽  
Antonella Cavazza ◽  
Emma Chiavaro

Green coffee parchment (GCP) is becoming interesting, due to the diffusion of wet processing in which coffee parchment is collected separately; it is one of the less studied coffee by-products, but it is reported to be rich in phenolic compounds and dietary fiber. The addition of GCP (355–500 μm) at 2 % to gluten-free breads was investigated in terms of physical properties (volume, moisture content, water activity, crumb grain, texture, and color), total antioxidant capacity (TAC) and total phenol content during three days of storage. Moreover, the effects of GCP on sensorial characteristics, 5-hydroxymethylfurfural (HMF), and oxidative stability was evaluated. From the sensorial analysis, bread with 2% addition resulted in being acceptable for consumers with no significant differences from the control, while 4% of GCP was discarded by consumers, as it resulted in being too bitter. Moreover, GCP at 2% addition did not modify volume, moisture content, and water activity. On the contrary, GCP deeply affected the color with a darker aspect that was appreciated by consumers. Regarding texture, 2% of GCP did not affect hardness, cohesiveness, and staling process during storage. Interestingly, 2% of GCP significantly improved the TAC and oxidative stability of the bread; in accordance with these results, 2% of GCP reduced the HMF content, thanks to its antioxidant compounds.


2018 ◽  
Vol 226 ◽  
pp. 02027
Author(s):  
Irina Cherunova ◽  
Elena Yakovleva ◽  
Ekaterina Stefanova

The article represents trends and results of world investigations for safety of textile materials for humans and environment. The algorithm for identification of potential influence vector of chemical emissions from textile and the environmentally aimed methods based on the alternative chemical substances for textile wet processing were presented. Using the procedure for oleophobic effect determination, the oil resistance levels of a number of modern fabrics for clothes were established. The experimental research results of the oil products concentration in the textile materials after chemical treatment based on the method of the capillary gas chromatography were presented. It was found out that hydrocarbons from C14H30 Tetradecane to С36Н74 Hexatriacontane are the main components with high level of contaminants concentration. The average values of hydrocarbon concentration on the cleaned up samples for the main areas of the clothe surface were determined. Accumulation of residual contaminations, based on saturated hydrocarbons (С17Н36 – С25Н52 block) and related special-purpose clothes areas, was identified. Recommendations for target-oriented correlation of the clothes protective properties were proposed. UWO (unified work order). The research was made in Don State Technical University within the framework of State Assignment of the Ministry of education and science of Russia under the project 11.9194.2017/BCh.


2000 ◽  
Vol 20 (12) ◽  
pp. 1907-1914 ◽  
Author(s):  
M Diaz ◽  
J.F Bartolomé ◽  
J Requena ◽  
J.S Moya
Keyword(s):  

Author(s):  
BIN ZHOU ◽  
XIANYI ZENG ◽  
LUDOVIC KOEHL ◽  
YONGSHENG DING

This paper presents an intelligent technology based method for analyzing and interpreting sensory data provided by multiple panels in evaluation of industrial products. In order to process the uncertainty existing in these sensory data, we first transform all sensory data on an unified optimal scale. Based on these normalized data sets, we compute the dissimilarities or distances between different panels and between different evaluation terms used by them, defined according to the degree of consistency of data variation. The obtained distances are then transformed into fuzzy numbers for physical interpretation. These fuzzy distances permit to characterize the evaluation behaviour of each panel and the quality of the evaluation terms used. Also, based on a Genetic Algorithm with punishment policy and the dissimilarity between terms, we develop a procedure for interpreting terms of one panel using those of another panel. This method has been applied to the fabric hand evaluation for a number of samples of knitted cotton in order to identify consumers' preference of different populations.


1991 ◽  
Vol 9 (2) ◽  
pp. 579-591 ◽  
Author(s):  
L. Pína ◽  
H. Fiedorowicz ◽  
M. O. Koshevoi ◽  
A. A. Rupasov ◽  
B. Rus ◽  
...  

A program is under way to develop methods and instrumentation based on charge-coupled device (CCD) sensors for hot plasma diagnostics. We have developed a new X-ray spectrometer in which a freestanding X-ray transmission grating is coupled to a CCD linear array detector with electronic digitized readout replacing film and its wet processing. This instrument measures time-integrated pulsed X-ray spectra with moderate spectral resolution (δλ ≤ 0.6 nm) over a broad spectral range (0.3–2 keV) with high sensitivity, linearity, and large dynamic range. The performance of the device was tested using laser plasma as the X-ray source.


2016 ◽  
Vol 88 (4) ◽  
pp. 467-479 ◽  
Author(s):  
Ka-yan Yim ◽  
Chi-wai Kan

Fabric hand is an indispensable characteristic for the selection of fabric and product development and the buying consideration for manufacturers and consumers. However, there is little comprehensive work on the hand feel property of warp-knitted fabrics due to the mainstream natural fibers (cotton, wool and silk) and other fabric structures (woven, weft-knitted and nonwoven). The increasing potential for the wide variety of applications and development of warp-knitted fabrics is not only because its fabric hand gives better determination for fabric marketing, but also because it provides extensive scope for fabric performance and appearance. This paper reports an experimental study on the integrated fabric hand behavior of a series of warp-knitted fabrics made for various apparel applications, such as sportswear, lingerie and leisure wear. These 105 fabrics were produced by varying different physical parameters, including fabric weight and fabric thickness. The Kawabata Evaluation System for Fabric (KES-F) was employed to obtain the fabric hand properties (primary hand value and total hand value) related with stiffness, smoothness and softness. All low-stress mechanical properties and fabric hand values from the testing results were used to verify the applicability of the KES-F on warp-knitted fabrics and to analyze the relationships of fabric parameters and hand characteristics. The results indicate that the KES-F is an appropriate tool to measure the hand attributes of warp-knitted samples, and moderate correlations between physical properties and mechanical behavior were found.


Sign in / Sign up

Export Citation Format

Share Document