scholarly journals Morphological and thermal properties of composites prepared with poly(lactic acid), poly(ethylene-alt-maleic anhydride), and biochar from microwave-pyrolyzed jatropha seeds

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 3171-3185
Author(s):  
Perry Law Nyuk Khui ◽  
Rezaur Rahman ◽  
Abu Saleh Ahmed ◽  
Kuok King Kuok ◽  
Muhammad Khusairy Bin Bakri ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Fourier Transform ◽  
Thermal Properties ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Filler Content ◽  
Scanning Calorimetry ◽  
Jatropha Seeds ◽  
Properties Of Composites

The morphological and thermal properties of composites containing a bioplastic blend and micro/nano-sized biochar from pyrolyzed jatropha seeds from microwave pyrolyzed jatropha seeds were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The biocomposite samples exhibited a brittle structure with a slightly ductile chip-like appearance. The Fourier transform infrared spectroscopy results for the PLA/PEMA/BC bio-composites were comparable to the PLA/BC biocomposites. A lower bio-filler content had more pronounced peak intensities than the higher bio-filler content biocomposites. The added PEMA compatibilizer in the PLA/PEMA/BC biocomposite showed more pronounced peaks, which indicated slightly improved bonding/interaction between the bio-filler and the matrix. Overall, increasing bio-filler content did not drastically affect the functional groups of the biocomposites. Thermogravimetric and differential scanning calorimetry analysis showed the developed biocomposites had a slight improvement in thermal stability, in comparison to the PLA sample. Improvements in the thermal stability of the PLA/PEMA/BC biocomposite could be attributed to the additional hydroxyl group, which was due to the added PEMA in the PLA and PLA/BC. According to the results of the analysis of the developed biocomposites, the biocomposites were more brittle and had reasonable thermal stability.

scholarly journals New insight into single phase formation of capric acid/menthol eutectic mixtures by Fourier-transform infrared spectroscopy and differential scanning calorimetry

2020 ◽  
Vol 19 (2) ◽  
pp. 361-369 ◽  
Author(s):  
Hiba H. Ali ◽  
Mowafaq M. Ghareeb ◽  
Mayyas Al-Remawi ◽  
Faisal T. Al-Akayleh
Keyword(s):  
Differential Scanning Calorimetry ◽  
Hydrogen Bond ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Bond Formation ◽  
Capric Acid ◽  
Fourier Transform Infrared ◽  
Scanning Calorimetry ◽  
Hydrogen Bond Formation

Purpose: To examine the structural changes of a eutectic mixture comprising capric acid and menthol which are commonly used in pharmaceutical applications. Methods: A phase diagram was constructed by quantitative mixing of capric acid and menthol under controlled conditions until a single liquid phase was formed. Eutectic mixtures of capric acid: menthol at the ratios of 3:2, 1:4, 1:1, 2:3, and 1:4 were prepared. Hydrogen bond formation and conformational changes were analyzed using Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). Microscopic imaging was carried out to capture phase change events upon increasing temperature. Results: Menthol confirmed the intact structure of a hexagonal ring. The high degree of broadening of the menthol O-H groups indicates hydrogen bond formation. FTIR band changes related to capric acid suggest a break-up of the methylene arrangement structure due to changes in the C-H band frequencies. The red shift encountered in C=O stretching band emphasizes hydrogen bond formation taking place between the oxygen atom of the hydroxyl group comprising the carboxylic moiety of capric acid and the hydrogen atom of menthol hydroxyl group. DSC results indicate the presence of two polymorphs of the capric acid/ menthol complex. Both exhibited crystallization and conformational change exotherms in addition to two melting endotherms as result of transformation of crystalline components to become partially crystalline due to hydrogen bond formation. Conclusion: The interaction between capric acid and menthol results in a typical preparation of deep eutectic systems that can act as natural-based solvents in numerous pharmaceutical applications. Keywords: Eutectic system, Capric acid, Menthol, Differential scanning calorimetry, DSC, Fourier transform infrared spectroscopy, FTIR

Design and evaluation of topical solid dispersion composite of voriconazole for the treatment of ocular keratitis

2019 ◽  
Vol 10 (8) ◽  
pp. 481-492
Author(s):  
Monali Patil ◽  
Swati Waydande ◽  
Pravin Pawar
Keyword(s):  
Differential Scanning Calorimetry ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Solid Dispersion ◽  
Fourier Transform Infrared ◽  
Eye Drops ◽  
Scanning Calorimetry ◽  
Saturation Solubility ◽  
Study Results

Aim: The objective of present investigation was to increases solubility of voriconazole by using solid dispersion techniques and the development of solid dispersion-based voriconazole ophthalmic solutions. Materials & methods: The saturation solubility of solid dispersion containing polyvinylpyrrolidone K90 (PVPK-90) was found to increase the solubility of voriconazole compare other carrier like polyethylene glycol and Polyvinylpyrrolidone K 30 (PVPK-30). Solid dispersion of voriconazole was characterized by saturation solubility, Fourier-transform infrared spectroscopy and Differential scanning calorimetry study. Results & conclusion: The Fourier-transform infrared spectroscopy and Differential scanning calorimetry studies of voriconazole-based solid dispersion confirmed the complete changes in original polymorphic form of voriconazole. The antifungal assay showed that the maximum zone of inhibition was produced from optimized ophthalmic formulation containing sodium alginate as compared with other formulations and marketed eye drops.

Force induced piezoelectric effect of polyvinylidene fluoride and polyvinylidene fluoride-co-trifluoroethylene nanofibrous scaffolds

2018 ◽  
Vol 41 (11) ◽  
pp. 811-822 ◽  
Author(s):  
Fedaa Al Halabi ◽  
Oleksandr Gryshkov ◽  
Antonia I Kuhn ◽  
Viktoria M Kapralova ◽  
Birgit Glasmacher
Keyword(s):  
Differential Scanning Calorimetry ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Polyvinylidene Fluoride ◽  
Piezoelectric Effect ◽  
Impact Load ◽  
Piezoelectric Response ◽  
Scanning Calorimetry ◽  
Impact Forces

Polyvinylidene fluoride and its co-polymer with trifluoroethylene are promising biomaterials for supporting nerve regeneration processes because of their proven biocompatibility and piezoelectric properties that could stimulate cell ingrowth due to electrical activity upon mechanical deformation. This study reports the piezoelectric effect of electrospun polyvinylidene fluoride scaffolds in response to mechanical loading. An impact test machine was used to evaluate the generation of electrical voltage upon application of an impact load. Scaffolds were produced via electrospinning from polyvinylidene fluoride and polyvinylidene fluoride-co-trifluoroethylene with concentrations of 10–20 wt% dissolved in N,N-dimethylformamide (DMF) and acetone (6:4). The structural and thermal properties of scaffolds were analyzed using Fourier Transform Infrared Spectroscopy and Differential Scanning Calorimetry, respectively. The piezoelectric response of the scaffolds was induced using a custom-made manual impact press machine. Impact forces between 0.4 and 14 N were applied. Fourier Transform Infrared Spectroscopy and Differential Scanning Calorimetry results demonstrated the piezoelectric effect of the electrospun polyvinylidene fluoride and polyvinylidene fluoride-co-trifluoroethylene scaffolds. All the scaffolds exhibited a piezoelectric polar beta-phase formation. Their thermal enthalpies were higher than the value of the initial materials and exhibited a better tendency of crystallization. The electrospun scaffolds exhibited piezoelectric responses in form of voltage by applying impact load. Polyvinylidene fluoride-co-trifluoroethylene scaffolds showed higher values in the range of 6–30 V as compared to pure polyvinylidene fluoride. Here, the mechanically induced electrical impulses measured were between 2.5 and 8 V. Increasing the impact forces did not increase the piezoelectric effect. The results demonstrate the possibility of producing electrospun polyvinylidene fluoride and polyvinylidene fluoride-co-trifluoroethylene scaffolds as nerve guidance with piezoelectric response. Further experiments must be carried out to analyze the piezoelectricity at dynamic conditions.

Sign in / Sign up

Export Citation Format

Share Document