Synthesis of nanocomposites: Organoceramics

1992 ◽  
Vol 7 (9) ◽  
pp. 2599-2611 ◽  
Author(s):  
Phillip B. Messersmith ◽  
Samuel I. Stupp

We report here on the synthesis of new materials termed organoceramics in which polymers are molecularly dispersed within inorganic crystalline phases. These nanocomposite materials may not only have unique morphologies and physical properties but may also lead to new processing methods for ceramic-based materials. In organoceramics polymer molecules could opportunistically occupy sites such as grain boundaries or other two-dimensional defects, nanopores, lattice channels, or interlamellar spaces. Our synthetic approach to get macromolecules to those sites is to nucleate and grow inorganic crystals from homogeneous solutions containing the polymer chains as co-solutes. The new materials discussed in this manuscript were synthesized by growing calcium aluminate crystals in the presence of water soluble polymers and were characterized by x-ray diffraction, scanning electron microscopy, elemental analysis, and diffuse reflectance infrared spectroscopy. The macromolecules used in organoceramic synthesis included poly(vinyl alcohol), poly(dimethyldiallyl ammonium chloride), and poly(dibutyl ammonium iodide). We found that the chemistry of polymer repeats can impact on the spatial distribution of the dispersed organic chains and also on the morphology of organoceramic powders. In the case of the poly(vinyl alcohol) organoceramic the polymer is intercalated in “flattened” conformations in Ca2Al(OH)6[X] ·nH2O, thus increasing the distance between ionic layers from 7.9 Å to ∊ 18 Å (X is a monovalent or divalent anion). Such a layered nanocomposite can be formed only by intercalating the poly(vinyl alcohol) during growth of the Ca2Al(OH)6[X] · nH2O crystal. The synthetic pathway is therefore able to overcome large entropic barriers and incorporate significant amounts of polymer in the organoceramic product, in some cases up to 38% by weight. The particles of this nanocomposite are spheroidal aggregates of thin plate crystals whereas the use of a polycationic polymer in the synthesis leads to rod-like particles in which organic chains may reside in channels of the inorganic crystal.

Nanomaterials ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 52 ◽  
Author(s):  
Martin Wortmann ◽  
Natalie Frese ◽  
Lilia Sabantina ◽  
Richard Petkau ◽  
Franziska Kinzel ◽  
...  

Electrospinning is a new technology whose scope is gradually being developed. For this reason, the number of known polymer–solvent combinations for electrospinning is still very low despite the enormous variety of substances that are potentially available. In particular, electrospinning from low-toxic solvents, such as the use of dimethyl sulfoxide (DMSO) in medical technology, is rare in the relevant scientific literature. Therefore, we present in this work a series of new polymers that are applicable for electrospinning from DMSO. From a wide range of synthetic polymers tested, poly(vinyl alcohol) (PVOH), poly(2ethyl2oxazolene) (PEOZ), and poly(vinylpyrrolidone) (PVP) as water-soluble polymers and poly(styrene-co-acrylonitrile) (SAN), poly(vinyl alcohol-co-ethylene) (EVOH), and acrylonitrile butadiene styrene (ABS) as water-insoluble polymers were found to be suitable for the production of nanofibers. Furthermore, the influence of acetone as a volatile solvent additive in DMSO on the fiber morphology of these polymers was investigated. Analyses of the fiber morphology by helium ion microscopy (HIM) showed significantly different fiber diameters for different polymers and a reduction in beads and branches with increasing acetone content.


2021 ◽  
Author(s):  
Aranee Pleng Teepakakorn ◽  
Makoto Ogawa

Water-induced self-healing materials were prepared by the hybridization of a water-soluble polymer, poly(vinyl alcohol), with a smectite clay by mixing in an aqueous media and subsequent casting. Without using chemical...


2011 ◽  
Vol 2 (4) ◽  
pp. 131-148 ◽  
Author(s):  
Francis Vidya ◽  
Subin S. Raghul ◽  
Sarita G Bhat ◽  
Eby Thomas Thachil

The main objective of this study was to enhance the rate of UV and biodegradation of polyethylene by incorporating biodegradable materials and prooxidants. Prooxidants such as transition metal complexes are capable of initiating photooxidation and polymer chain cleavage, rendering the product more susceptible to biodegradation. In this work, the effect of (1) a metallic photoinitiator, cobalt stearate, and (2) different combinations of cobalt stearate and vegetable oil on the photooxidative degradation of linear low-density poly(ethylene)-poly(vinyl alcohol) (LLDPE/PVA) blend films has been investigated. For this, film-grade LLDPE was blended with different proportions of PVA. PVA is widely used in the industrial field, and recently it has attracted increasing attention as a water-soluble biodegradable polymer. Cobalt stearate and vegetable oil were added to the blends as prooxidants. The blends were prepared by melt mixing in a Thermo HAAKE Polylab system. Thin films containing these additives were prepared by a subsequent compression moulding process. The effect of UV exposure on LLDPE/PVA films in the presence as well as absence of these additives was investigated. Tensile properties, FTIR spectra, and scanning electron microscopy (SEM) were employed to investigate the degradation behaviour. It was found


Sign in / Sign up

Export Citation Format

Share Document