Properties and crystallization of Li2O–CaO–Al2O3–SiO2–TiO2glasses

1993 ◽  
Vol 8 (4) ◽  
pp. 890-898 ◽  
Author(s):  
Moo-Chin Wang ◽  
Min-Hsiung Hon
Keyword(s):  
Thermal Expansion ◽  
Thermal Properties ◽  
Diffraction Analysis ◽  
Crystalline Phase ◽  
Glass Ceramics ◽  
Weight Percent ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients

The addition of CaO to Li2O–Al2O3–SiO2–TiO2(LAST), forming the Li2O–CaO–Al2O3–SiO2–TiO2(LCAST) system, is used in the preparation of low themal expansion coefficient glass-ceramics. By a progressive weight percent substitution of CaO for SiO2, at constant ratios of concentration of Li2O, Al2O3, and TiO2, a number of properties of these glasses have been studied. The results indicated that these thermal properties increased progressively with increasing CaO concentration. X-ray diffraction analysis was utilized to identify the crystalline phase in glass-ceramics of the Li2O–CaO–Al2O3–SiO2-TiO2system. Thed-spacings of the major crystallites were precisely measured and fitted with those of β-spodumene. The minor crystalline phase of titanite, CaO · TiO2· SiO2, was also present. The average thermal expansion coefficients from 25 to 700 °C were 3.50 × 10−6/°C, 3.81 × 10−6/°C, and 3.91 × 10−6/°C for samples A, B, and C, respectively.

Crystal structure and thermal properties of compound K2Zn3(P2O7)2

2008 ◽  
Vol 23 (4) ◽  
pp. 317-322 ◽  
Author(s):  
L. N. Ji ◽  
G. M. Cai ◽  
J. B. Li ◽  
J. Luo ◽  
J. K. Liang ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Thermal Expansion ◽  
Thermal Properties ◽  
Lattice Parameters ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
Heating Curve ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients

K2Zn3(P2O7)2 was synthesized by solid state reaction and its crystal structure was determined by ab initio method from powder X-ray diffraction (XRD) data. The title compound was determined to be orthorhombic with space group P212121, Z=4, and lattice parameters a=12.901(8) Å, b=10.102(6) Å, and c=9.958(1) Å. Values of lattice parameters from 303 to 573 K were measured by temperature-dependent XRD. Thermal expansion coefficients α0, lattice parameters, and cell volume at 0 K were determined to be α0(a)=1.62327×10−4/K, a0=12.855(4) Å, α0(b)=1.17921×10−4/K, b0=10.070(8) Å, α0(c)=2.62364×10−4/K, c0=9.880(4) Å, and α0(V)=6.599×10−2/K, V0=1278.967(0) Å3. The specific heat equation as a function of temperature was determined to be Cp=0.77115+0.00231T−1241.60027T−2−1.4133×10−6T2 (J/K g), for temperatures from 198 to 710 K. The melting point estimated from the μ-DTA heating curve is 795 °C.

The crystal structure and thermal expansion of the CCl4 adduct of Dianin's compound

1990 ◽  
Vol 68 (8) ◽  
pp. 1352-1356 ◽  
Author(s):  
Walter Abriel ◽  
André Du Bois ◽  
Marek Zakrzewski ◽  
Mary Anne White
Keyword(s):  
Crystal Structure ◽  
Thermal Expansion ◽  
Powder Diffraction ◽  
Diffraction Data ◽  
X Ray Diffraction ◽  
Guest Molecules ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients ◽  
Dianin's Compound

The crystal structure of the title compound has been determined by single crystal X-ray diffraction data collected at 293 K, and refined to a final Rw of 0.057. The crystals are rhombohedral, space group [Formula: see text], with a = 27.134(8) Å, c = 10.933(2) Å, and Z = 18. The mole ratio of Dianin's compound (4-p-hydroxyphenyl-2,2,4-trimethylchroman) to CCl4 is 6:1. The guest molecules are disordered. X-ray powder diffraction was carried out in the temperature range from 10 to 300 K. From this, the thermal expansion coefficients for the a- and c-axes and the volume have been determined. Keywords: thermal expansion, crystal structure, clathrate.

Structure and Thermal Expansion Behavior of Dy2-xGdxMo4O15 Solid Solution

2008 ◽  
Vol 368-372 ◽  
pp. 1665-1667
Author(s):  
M.M. Wu ◽  
X.L. Xiao ◽  
Y.Z. Cheng ◽  
J. Peng ◽  
D.F. Chen ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Solid Solution ◽  
Thermal Expansion ◽  
Monoclinic Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Expansion Behavior ◽  
Expansion Coefficients ◽  
Cell Volumes

A new series of solid solutions Dy2-xGdxMo4O15 (x = 0.0-0.9) were prepared. These compounds all crystallize in monoclinic structure with space group P21/c. The lattice parameters a, b, c and unit cell volumes V increase almost linearly with increasing gadolinium content. The intrinsic thermal expansion coefficients of Dy2-xGdxMo4O15 (x = 0.0 and 0.25) were obtained in the temperature range of 25 to 500°C with high-temperature X-ray diffraction. The correlation between thermal expansion and crystal structure was discussed.

scholarly journals An examination of the thermal expansion of urea using high-resolution variable-temperature X-ray powder diffraction

2005 ◽  
Vol 38 (6) ◽  
pp. 1038-1039 ◽  
Author(s):  
Robert Hammond ◽  
Klimentina Pencheva ◽  
Kevin J. Roberts ◽  
Patricia Mougin ◽  
Derek Wilkinson
Keyword(s):  
Thermal Expansion ◽  
High Resolution ◽  
Variable Temperature ◽  
X Ray Diffraction ◽  
Polymorphic Transformations ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Cell Dimensions ◽  
Expansion Coefficients ◽  
Unit Cell Dimensions

Variable-temperature high-resolution capillary-mode powder X-ray diffraction is used to assess changes in unit-cell dimensions as a function of temperature over the range 188–328 K. No evidence was found for any polymorphic transformations over this temperature range and thermal expansion coefficients for urea were found to be αa= (5.27 ± 0.26) × 10−5 K−1and αc= (1.14 ± 0.057) × 10−5 K−1.

Crystal structure and thermal expansion of hexakis(phenylthio)benzene and its CBr4 clathrate

1995 ◽  
Vol 73 (4) ◽  
pp. 513-521 ◽  
Author(s):  
Darek Michalski ◽  
Mary Anne White ◽  
Pradip K. Bakshi ◽  
T. Stanley Cameron ◽  
Ian Swainson
Keyword(s):  
Crystal Structure ◽  
Thermal Expansion ◽  
Neutron Powder Diffraction ◽  
X Ray Diffraction ◽  
Triclinic Space Group ◽  
Space Group ◽  
X Ray ◽  
Temperature Range ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients

The crystal structures of hexakis(phenylthio)benzene (HPTB) and its CBr4 clathrate have been determined by single crystal X-ray diffraction data collected at T = 18 °C and refined to final Rw of 0.036 and 0.047, respectively. Pure HPTB is triclinic, space group [Formula: see text] (No. 2), with a = 9.589(2) Å, b = 10.256(1) Å, c = 10.645(2) Å, α = 68.42(1)°, β = 76.92(2)°, γ = 65.52(1)°, and Z = 1. The CBr4 clathrate of HPTB is rhombohedral, space group [Formula: see text] (No. 148), with a = 14.327(4) Å, b = 20.666(8) Å, and Z = 3. The host–guest mole ratio of HPTB–CBr4 is 1:2. Neutron powder diffraction was carried out on powders of both compounds in the temperature range 25 K < T < 295 K. Thermal expansion coefficients were determined for HPTB and HPTB–CBr4 over this temperature range. Keywords: thermal expansion, crystal structure, clathrate.

Behaviors of the Zr–1.0Sn–0.39Nb–0.31Fe–0.05Cr Alloy at High Temperature

2011 ◽  
Vol 399-401 ◽  
pp. 80-84
Author(s):  
Yi Yuan Tang ◽  
Jie Li Meng ◽  
Kai Lian Huang ◽  
Jian Lie Liang
Keyword(s):  
Thermal Expansion ◽  
Phase Transformation ◽  
High Temperature ◽  
Oxide Film ◽  
Room Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thin Oxide Film ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients

Phase transformation of the Zr-1.0Sn-0.39Nb-0.31Fe-0.05Cr alloy was investigated by high temperature X-ray diffraction (XRD). The XRD results revealed that the alloy contained two precipitates at room temperature, namely β-Nb and hexagonal Zr(Nb,Fe,Cr,)2. β-Nb was suggested to dissolve into the α-Zr matrix at the 580oC. Thin oxide film formed at the alloy’s surface was identified as mixture of the monoclinic Zr0.93O2and tetragonal ZrO2, when the temperature reached to 750oC and 850 oC. The thermal expansion coefficients of αZr in this alloy was of αa = 8.39×10-6/°C, αc = 2.48×10-6/°C.

A time-resolved x-ray diffraction study of Ti5Si3 product formation during combustion synthesis

1997 ◽  
Vol 12 (12) ◽  
pp. 3230-3240 ◽  
Author(s):  
C. R. Kachelmyer ◽  
I. O. Khomenko ◽  
A. S. Rogachev ◽  
A. Varma
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Product Formation ◽  
X Ray Diffraction ◽  
Temperature Synthesis ◽  
Time Resolved ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
High Temperature Synthesis ◽  
Expansion Coefficients

Time-resolved x-ray diffraction (TRXRD) was performed during Ti5Si3 synthesis by the self-propagating high-temperature synthesis mode for different Ti size fractions. It was determined that the time for product formation (ca. 15 s) was independent of Ti particle size. However, the formation of Ti5Si4 phase occurred when relatively large titanium particles were used. A simultaneous measurement of the temperature and TRXRD allowed us to attribute the shifting of XRD peaks at high temperature to thermal expansion of the Ti5Si3 product. The thermal expansion coefficients differ for different crystal planes, and their numerical values compare well with those reported previously in the literature.

Residual Stress in Two Dental Alloys During Porcelain Application

1987 ◽  
Vol 31 ◽  
pp. 255-260
Author(s):  
M. Bagby ◽  
SJ Marshall ◽  
GW Marshall
Keyword(s):  
Residual Stress ◽  
Thermal Expansion ◽  
Residual Stresses ◽  
Casting Process ◽  
Dental Alloys ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Dental Restorations ◽  
Expansion Coefficients

Residual stresses in dental castings are widely held to be the cause of distortion and change of fit in ceramic bonded to metal dental restorations. Residual stresses are thought to result from the casting process and from ceramic/metal mismatch of thermal expansion coefficients. Such stresses have not been confirmed experimentally. The purpose of this study was to measure residual stress with x-ray diffraction at the various porcelain application steps for two noble dental alloys with two dental opaque porcelains.

Investigation of thermal behavior of mixed-valent iron borates vonsenite and hulsite containing [OM 4] n + and [OM 5] n + oxocentred polyhedra by in situ high-temperature Mössbauer spectroscopy, X-ray diffraction and thermal analysis

2020 ◽  
Vol 76 (4) ◽  
pp. 543-553
Author(s):  
Yaroslav P. Biryukov ◽  
Almaz L. Zinnatullin ◽  
Rimma S. Bubnova ◽  
Farit G. Vagizov ◽  
Andrey P. Shablinskii ◽  
...  
Keyword(s):  
Thermal Expansion ◽  
Mössbauer Spectroscopy ◽  
High Temperature ◽  
Thermal Behavior ◽  
Mossbauer Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mößbauer Spectroscopy ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients

The investigation of elemental composition, crystal structure and thermal behavior of vonsenite and hulsite from the Titovskoe boron deposit in Russia is reported. The structures of the borates are described in terms of cation-centered and oxocentred polyhedra. There are different sequences of double chains and layers consisting of oxocentred [OM 4] n + tetrahedra and [OM 5] n + tetragonal pyramids forming a framework. Elemental composition was determined by energy-dispersive X-ray spectroscopy (EDX). Oxidation states and coordination sites of iron and tin in the oxoborates are determined using Mössbauer spectroscopy and compared with EDX and X-ray diffraction data (XRD). According to results obtained from high-temperature Mössbauer spectroscopy, the Fe2+ to Fe3+ oxidation in vonsenite and hulsite occurs at approximately 500 and 600 K, respectively. According to the high-temperature XRD data, this process is accompanied by an assumed deformation of crystal structures and subsequent solid-phase decomposition to hematite and warwickite. It is seen as a monotonic decrease of volume thermal expansion coefficients with an increase in temperature. A partial magnetic ordering in hulsite is observed for the first time with T c ≃ 383 K. Near this temperature, an unusual change of thermal expansion coefficients is revealed. Vonsenite starts to melt at 1571 K and hulsite melts at 1504 K. Eigenvalues of thermal expansion tensor are calculated for the oxoborates as well as anisotropy of the expansion is described in comparison with their crystal structures.

Sign in / Sign up

Export Citation Format

Share Document