Enhancement in redox and electrocatalytic activity observed on Si ion-implanted Ni

2004 ◽  
Vol 19 (2) ◽  
pp. 616-622
Author(s):  
M.T. Pham ◽  
M.F. Maitz ◽  
E. Richter ◽  
H. Reuther ◽  
A. Muecklich ◽  
...  
Keyword(s):  
Ion Implantation ◽  
Photoelectron Spectroscopy ◽  
Active Surface ◽  
X Ray ◽  
Force Microscopy ◽  
Surface Sites ◽  
Atomic Force ◽  
Active Surface Sites ◽  
Oxidation Of Glucose ◽  
Redox Conversion

Ni was surface-alloyed with Si by ion implantation. The material was examined for its redox and electrocatalytic behavior in NaOH by cyclic voltammetry. The surface was characterized by x-ray photoelectron spectroscopy, x-ray and electron diffraction, and electron and atomic force microscopy. The ion implantation enhanced activity toward the redox conversion of Ni(OH)2 ↔ NiOOH and the anodic oxidation of glucose reached about 3.5 times and about 2.8 times, respectively. The material is an amorphous mixed oxide of Ni and Si. The effect is discussed considering the true surface area and the generation of active surface sites in relation to the oxygen evolution.

Redox and Electrocatalytic Activity of Ni Ion-Implanted Ti

2004 ◽  
Vol 19 (4) ◽  
pp. 1249-1256 ◽  
Author(s):  
M.T. Pham ◽  
M.F. Maitz ◽  
H. Reuther ◽  
E. Richter ◽  
W. Matz ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Surface Film ◽  
Bulk Alloy ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Oxidation Of Glucose ◽  
Redox Conversion ◽  
Ion Implanted

Ni-Ti surface alloy was prepared by ion-implanting Ni into Ti. The surface film was amorphous having a Ni surface content of 10–40 at.%. The material was compared with a Ni-Ti bulk alloy (44.08:55.9) regarding their redox and electrocatalytic behavior in NaOH by cyclic voltammetry. The surface was characterized by x-ray photoelectron spectroscopy, x-ray and electron diffraction, transmission electron microscopy, and atomic force microscopy. The ion-implanted material revealed an enhanced activity toward the redox conversion of Ni(OH)2 ↔ NiOOH and the anodic oxidation of glucose. The effect is discussed considering the enhanced generation of active Ni surface sites from amorphous Ni and the stabilization of higher valence Ni by Ti.

Investigation of the Effect of Uv-Assisted Oxidation and Nitridation of Hafnium Metal Films

2003 ◽  
Vol 780 ◽  
Author(s):  
C. Essary ◽  
V. Craciun ◽  
J. M. Howard ◽  
R. K. Singh
Keyword(s):  
Uv Radiation ◽  
Photoelectron Spectroscopy ◽  
Grazing Angle ◽  
X Ray Diffraction ◽  
Metal Thin Films ◽  
X Ray ◽  
Force Microscopy ◽  
Si Substrates ◽  
Atomic Force ◽  
Silicon Interface

AbstractHf metal thin films were deposited on Si substrates using a pulsed laser deposition technique in vacuum and in ammonia ambients. The films were then oxidized at 400 °C in 300 Torr of O2. Half the samples were oxidized in the presence of ultraviolet (UV) radiation from a Hg lamp array. X-ray photoelectron spectroscopy, atomic force microscopy, and grazing angle X-ray diffraction were used to compare the crystallinity, roughness, and composition of the films. It has been found that UV radiation causes roughening of the films and also promotes crystallization at lower temperatures.Furthermore, increased silicon oxidation at the interface was noted with the UVirradiated samples and was shown to be in the form of a mixed layer using angle-resolved X-ray photoelectron spectroscopy. Incorporation of nitrogen into the film reduces the oxidation of the silicon interface.

Optical properties of anatase TiO2 films modified by N ion implantation

2012 ◽  
Vol 90 (1) ◽  
pp. 39-43 ◽  
Author(s):  
X. Xiang ◽  
D. Chang ◽  
Y. Jiang ◽  
C.M. Liu ◽  
X.T. Zu
Keyword(s):  
Thin Films ◽  
Ion Implantation ◽  
Photoelectron Spectroscopy ◽  
Radio Frequency Magnetron Sputtering ◽  
X Ray Diffraction ◽  
X Ray ◽  
Atomic Force ◽  
Light Region ◽  
Uv Visible ◽  
Substrate Temperatures

Anatase TiO2 thin films are deposited on K9 glass samples at different substrate temperatures by radio frequency magnetron sputtering. N ion implantation is performed in the as-deposited TiO2 thin films at ion fluences of 5 × 1016, 1 × 1017, and 5 × 1017 ions/cm2. X-ray diffraction, atomic force microscope, X-ray photoelectron spectroscopy (XPS), and UV–visible spectrophotometer are used to characterize the films. With increasing N ion fluences, the absorption edges of anatase TiO2 films shift to longer wavelengths and the absorbance increases in the visible light region. XPS results show that the red shift of TiO2 films is due to the formation of N–Ti–O compounds. As a result, photoactivity is enhanced with increasing N ion fluence.

Curcumin delivery by modified biosourced carbon-based nanoparticles

Nanomedicine ◽  
2022 ◽  
Author(s):  
Hossein Danafar ◽  
Marziyeh Salehiabar ◽  
Murat Barsbay ◽  
Hossein Rahimi ◽  
Mohammadreza Ghaffarlou ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Free System ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Good Biocompatibility ◽  
Drug Free ◽  
Mcf 7 ◽  
Carbon Based

Aim: To prepare a novel hybrid system for the controlled release and delivery of curcumin (CUR). Methods: A method for the ultrasound-assisted fabrication of protein-modified nanosized graphene oxide-like carbon-based nanoparticles (CBNPs) was developed. After being modified with bovine serum albumin (BSA), CUR was loaded onto the synthesized hybrid (labeled CBNPs@BSA–CUR). The structure and properties of the synthesized nanoparticles were elucidated using transmission electron microscopy (TEM), atomic force microscopy (AFM), ultraviolet-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR) and x-ray photoelectron spectroscopy (XPS) methods. Results: CBNPs@BSA–CUR showed pH sensitivity and were calculated as controlled CUR release behavior. The drug-free system exhibited good biocompatibility and was nontoxic. However, CBNPs@BSA–CUR showed acceptable antiproliferative ability against MCF-7 breast cancer cells. Conclusion: CBNPs@BSA–CUR could be considered a highly promising nontoxic nanocarrier for the delivery of CUR with good biosafety.

Effect of Surface Chemistry on Ruthenium Wet Etching

2021 ◽  
Vol 314 ◽  
pp. 302-306
Author(s):  
Quoc Toan Le ◽  
E. Kesters ◽  
M. Doms ◽  
Efrain Altamirano Sánchez
Keyword(s):  
Surface Roughness ◽  
Photoelectron Spectroscopy ◽  
Etching Rate ◽  
Wet Etching ◽  
X Ray ◽  
Force Microscopy ◽  
Metal Free ◽  
Atomic Force ◽  
Different Types ◽  
Effect Of Surface

Different types of ALD Ru films, including as-deposited, annealed Ru, without and with a subsequent CMP step, were used for wet etching study. With respect to the as-deposited Ru, the etching rate of the annealed Ru film in metal-free chemical mixtures (pH = 7-9) was found to decrease substantially. X-ray photoelectron spectroscopy characterization indicated that this behavior could be explained by the presence of the formation of RuOx (x = 2,3) caused by the anneal. A short CMP step applied to the annealed Ru wafer removed the surface RuOx, at least partially, resulting in a significant increase of the etching rate. The change in surface roughness was quantified using atomic force microscopy.

Investigation of Ti/CuO interface by X-ray photoelectron spectroscopy and atomic force microscopy

2018 ◽  
Vol 51 (2) ◽  
pp. 246-253
Author(s):  
Dev Raj Chopra ◽  
Justin Seth Pearson ◽  
Darius Durant ◽  
Ritesh Bhakta ◽  
Anil R. Chourasia
Keyword(s):  
Atomic Force Microscopy ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force

Characterization of X-ray irradiated graphene oxide coatings using X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy

2013 ◽  
Vol 28 (2) ◽  
pp. 68-71 ◽  
Author(s):  
Thomas N. Blanton ◽  
Debasis Majumdar
Keyword(s):  
Atomic Force Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
High Energy ◽  
X Ray Diffraction ◽  
Carbon Phase ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Before And After

In an effort to study an alternative approach to make graphene from graphene oxide (GO), exposure of GO to high-energy X-ray radiation has been performed. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) have been used to characterize GO before and after irradiation. Results indicate that GO exposed to high-energy radiation is converted to an amorphous carbon phase that is conductive.

Sign in / Sign up

Export Citation Format

Share Document